4.7 Article

Simultaneous optimization of multiple engine parameters of a 1-heptanol / gasoline fuel blends operated a port-fuel injection spark- ignition engine using response surface methodology approach

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

A hybrid RSM-ANN-GA approach on optimisation of extraction conditions for bioactive component-rich laver (Porphyra dentata) extract

Thinzar Aung et al.

Summary: This research established optimal extraction conditions for bioactive components from laver using response surface methodology and artificial neural network coupled with genetic algorithm. The study found that ultrasound-assisted extraction gave higher values of responses compared to infusion extraction, and RSM-ANN-GA provided better predictability and accuracy.

FOOD CHEMISTRY (2022)

Article Chemistry, Physical

Optimization of hydrogen production via toluene steam reforming over Ni-Co supported modified-activated carbon using ANN coupled GA and RSM

Hamdya Sabrina Mohidin Yahya et al.

Summary: The study investigated the optimization of hydrogen production from catalytic steam reforming of toluene using response surface methodology and artificial neural network coupled genetic algorithm models. The ANN-GA model with a three-layered feed-forward neural network showed higher predictive capabilities compared to the RSM model.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Article Thermodynamics

Experimental investigation on compression ignition engine powered with pentanol and thevetia peruviana methyl ester under reactivity controlled compression ignition mode of operation

P. A. Harari et al.

Summary: The study showed that adding 10% pentanol in the fuel is beneficial for increasing the brake thermal efficiency of diesel and pentanol fuel combination in RCCI mode, while reducing nitrogen oxide and smoke emissions.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Engineering, Aerospace

A novel framework for liquid propellant engine's cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

H. R. Alimohammadi et al.

Summary: This paper presents a novel approach for optimizing the cooling system of Liquid Propellant Engines (LPEs), utilizing multi-objective optimization algorithms RSM and PSO. The method resulted in improved heat transfer and reduced pressure losses, ultimately increasing the engine's specific impulse.

ADVANCES IN SPACE RESEARCH (2021)

Article Agricultural Engineering

Modeling and optimization of capsaicin extraction from Capsicum annuum L. using response surface methodology (RSM), artificial neural network (ANN), and Simulink simulation

Najet Gammoudi et al.

Summary: This study optimized the extraction of capsaicin from peppers using response surface methodology, artificial neural network, and Simulink models, with artificial neural network proving to be the most accurate method with higher recovery and less variation range in the optimization step.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Energy & Fuels

A novel approach to study the effect of motor silk-added pyrolysis tire oil on performance and emission characteristics of a diesel engine

Suleyman Simsek et al.

Summary: The experimental study evaluated the usability of pyrolyzed tire oil supplemented with motor silk as an alternative fuel for diesel engines. The results showed that adding 30% PRO into euro diesel increases exhaust emissions and brake specific fuel consumption, but the addition of motor silk can reduce BSFC values by about 9%. Overall, the use of motor silk increases brake thermal efficiency and decreases BSFC values.
Article Thermodynamics

Multi-objective-optimization of process parameters of diesel engine fueled with biodiesel/2-ethylhexyl nitrate by using Taguchi method

Suleyman Simsek et al.

Summary: By investigating the effects of different proportions of biodiesel and 2-ethylhexyl nitrate on the performance and emission characteristics of a diesel engine, optimal control parameters were determined to achieve the best response characteristics. The validation results showed a maximum error of 9.42%, indicating the acceptability of the findings from this investigation.

ENERGY (2021)

Article Energy & Fuels

Comparative study using RSM and ANN modelling for performance-emission prediction of CI engine fuelled with bio-diesohol blends: A fuzzy optimization approach

Suman Dey et al.

Summary: This study focused on predicting engine responses of a single cylinder CI engine powered by bio-diesohol blends using response surface methodology and artificial neural network model. The results showed that the ANN model had lower prediction error and higher correlation compared to RSM, with the performance of the D75B20E5 blend found to be comparable to diesel.
Article Engineering, Chemical

Clean combustion and emissions strategy using reactivity controlled compression ignition (RCCI) mode engine powered with CNG-Karanja biodiesel

S. P. Wategave et al.

Summary: This study focuses on optimizing combustion noise and emissions of diesel engines by using CNG as the primary fuel, combined with diesel and biodiesel as pilot fuels. The research indicates that an optimized energy share of CNG in the RCCI mode is crucial for achieving clean combustion and emission strategies.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Energy & Fuels

Optimization and analysis of syngas production from methane and CO2 via Taguchi approach, response surface methodology (RSM) and analysis of variance (ANOVA)

Wei-Hsin Chen et al.

Summary: This study aims to produce syngas from methane and CO2 through catalytic partial oxidation, optimizing the process through a two-stage approach of Taguchi method followed by response surface methodology. The results show that the combination of GHSV and O2/C ratio significantly impact the syngas yield, leading to a 5.15% increase in efficiency compared to single-stage optimization.
Article Chemistry, Multidisciplinary

Experimental Analysis of Engine Performance and Exhaust Pollutant on a Single-Cylinder Diesel Engine Operated Using Moringa Oleifera Biodiesel

Manzoore Elahi M. Soudagar et al.

Summary: The experiment showed that using MOB10 in the biodiesel production from Moringa oleifera oil can reduce some emissions, but also increase CO and NOx emissions.

APPLIED SCIENCES-BASEL (2021)

Article Green & Sustainable Science & Technology

Lemon peel oil as an alternative fuel for GDI engines: A spray characterization perspective

Abinash Biswal et al.

RENEWABLE ENERGY (2019)

Article Green & Sustainable Science & Technology

Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends

M. Mourad et al.

RENEWABLE ENERGY (2019)

Article Green & Sustainable Science & Technology

Comparative assessment of ethanol and isobutanol addition in gasoline on engine performance and exhaust emissions

M. N. A. M. Yusoff et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Review Green & Sustainable Science & Technology

Effects of physicochemical properties of biodiesel fuel blends with alcohol on diesel engine performance and exhaust emissions: A review

M. S. M. Zaharin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Using fusel oil as a blend in gasoline to improve SI engine efficiencies: A comprehensive review

Omar I. Awad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Butanol and pentanol: The promising biofuels for CI engines A - review

Vinod M. Babu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)