4.5 Article

Evaluation of the Melting Gasification Process for Recovery of Energy and Resources from Automobile Shredder Residues

期刊

ENERGIES
卷 15, 期 3, 页码 -

出版社

MDPI
DOI: 10.3390/en15031248

关键词

bottom ash; automobile shredder residue; clay brick; melting-gasification process; greenhouse gases

资金

  1. National Institute of Environmental Research (NIER) - Ministry of Environment (MOE) of the Republic of Korea [NIER-2021-01-01-003]
  2. Korea Institute of Energy Technology Evaluation and Planning (KETEP) [20184030202240]
  3. Korea Environmental Industry & Technology Institute (KEITI) [NIER-2021-01-01-003] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)
  4. Korea Evaluation Institute of Industrial Technology (KEIT) [20184030202240] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)

向作者/读者索取更多资源

This study investigated the feasibility of utilizing automobile shredder residue (ASR) as an energy and recycling resource. Gasification of ASR was conducted at different temperatures and equivalence ratios. The solid residue obtained from the gasification process was used to prepare clay bricks. The study showed that the gasification of ASR at high temperatures and equivalence ratios resulted in higher yields of syngas. Moreover, the study revealed that the combined melting-gasification process was more efficient in terms of greenhouse gas reduction compared to ASR incineration.
In this study, we investigated the applicability of an automobile shredder residue (ASR) as an energy and recycling resource. First, ASR gasification was conducted in a fixed-bed reactor (throughput = 1 kg/h) at different temperatures (800, 1000, and 1200 degrees C) and an equivalence ratio of 0.1-0.5. Clay bricks were prepared with the solid residue obtained from the gasification process to address the issue of solid-residue production in pyrolysis. The syngas (H-2 + CO) from ASR gasification had maximum and minimum yields of approximately 86 and 40 vol.%, respectively. Furthermore, the yield of syngas increased with the temperature and equivalence ratio (ER); therefore, the optimum conditions for the ASR gasification were determined to be a temperature of 1200 degrees C and an ER of 0.5. In addition, solid residues, such as char and ash, began to melt due to thermal heating in the range of 1300-1400 degrees C and were converted into melting slag, which was subsequently used to manufacture clay bricks. The absorption ratios and compressive strengths of the clay bricks were compared to those set by Korean Industrial Standards to evaluate the quality of the clay bricks. As a result, the manufactured clay bricks were estimated to have a compressive strength of over 22.54 N/mm(2) and an absorption ratio of less than 10%. Additionally, greenhouse gas (GHG) emissions from the melting-gasification process were estimated and compared with those from ASR incineration, calculated using the greenhouse gas equations provided by the Korean Ministry of Environment. As a result, it was revealed that the GHG emissions from the combined melting-gasification process (gasification, melting system, and clay-brick manufacturing) were approximately ten times higher than those from the ASR-incineration process. Thus, in terms of operation cost on the carbon capture process for GHG reduction, the combined melting-gasification process would be a more efficient process than that of incineration.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.5
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据