相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Nanomaterials as fuel additives in diesel engines: A review of current state, opportunities, and challenges
Tina Kegl et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)
An estimation of heavy-duty vehicle fleet CO2 emissions based on sampled data
Nikiforos Zacharof et al.
TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2021)
Advances in combustion control for natural gas-diesel dual fuel compression ignition engines in automotive applications: A review
Carrie Hall et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
IJER editorial: The future of the internal combustion engine
R. D. Reitz et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2020)
Turbocharging strategy among variable geometry turbine, two-stage turbine, and asymmetric two-scroll turbine for energy and emission in diesel engines
Dengting Zhu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2020)
A review of waste heat recovery from the marine engine with highly efficient bottoming power cycles
Sipeng Zhu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine
K. Nanthagopal et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Overview of polyoxymethylene dimethyl ether additive as an eco-friendly fuel for an internal combustion engine: Current application and environmental impacts
Omar Awad et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Particulate emissions from gasoline direct injection engines: A review of how current emission regulations are being met by automobile manufacturers
Omar Awad et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Enhancing the Geometrical Performance Using Initially Conical Cylinder Liner in Internal Combustion Engines-A Numerical Study
Ahmad Alshwawra et al.
APPLIED SCIENCES-BASEL (2020)
A Comprehensive Numerical Study on Friction Reduction and Wear Resistance by Surface Coating on Cam/Tappet Pairs under Different Conditions
Bugao Lyu et al.
COATINGS (2020)
Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part II: Nano-lubricants
Mohammad Hatami et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Characterization of Energy Distribution and Efficiency in a Modern Heavy-Duty Diesel Engine
Arvind Thiruvengadam et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2020)
Challenges of friction reduction of engine plain bearings - Tackling the problem with novel bearing materials
Florian Summer et al.
TRIBOLOGY INTERNATIONAL (2019)
Energy efficiency analysis of marine high-powered medium-speed diesel engine base on energy balance and exergy
Zhi-Min Yao et al.
ENERGY (2019)
Thermo-swing insulation to reduce heat loss from the combustion chamber wall of a diesel engine
Akio Kawaguchi et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2019)
A comprehensive review of organic rankine cycle waste heat recovery systems in heavy-duty diesel engine applications
Bin Xu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Experimental investigation on performance and economy characteristics of a diesel engine with variable nozzle turbocharger and its application in urban bus
Jiaqiang E et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Application of Miller cycle with turbocharger and ethanol to reduce NOx and particulates emissions from diesel engine - A numerical approach with model validations
Chengqian Li et al.
APPLIED THERMAL ENGINEERING (2019)
Review of thermal management of catalytic converters to decrease engine emissions during cold start and warm up
Jianbing Gao et al.
APPLIED THERMAL ENGINEERING (2019)
Dispersion of Nanoparticles in Lubricating Oil: A Critical Review
Yan Chen et al.
LUBRICANTS (2019)
Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine
Christoph Knauder et al.
LUBRICANTS (2019)
Modelling Transitions in Regimes of Lubrication for Rough Surface Contact
William Woei Fong Chong et al.
LUBRICANTS (2019)
Microstructure and fatigue fracture mechanism for a heavy-duty truck diesel engine crankshaft
K. Aliakbari et al.
SCIENTIA IRANICA (2019)
Investigation on laser surface texturing for friction reduction in multi cylinder internal combustion engine
Vijay K. Patel et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
Maximum efficiencies for internal combustion engines: Thermodynamic limitations
Jerald A. Caton
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2018)
Comparative study on the pumping losses between continuous variable valve lift (CVVL) engine and variable valve timing (VVT) engine
Qingyu Li et al.
APPLIED THERMAL ENGINEERING (2018)
An intelligent cooling system and control model for improved engine thermal management
Arya K. Haghighat et al.
APPLIED THERMAL ENGINEERING (2018)
Investigation on the Potential of High Efficiency for Internal Combustion Engines
Haifeng Liu et al.
ENERGIES (2018)
Measuring tappet rotation in a valvetrain rig when lubricated in a fully formulated oil containing MoDTC-type friction modifier
Yasir Al-Jeboori et al.
TRIBOLOGY INTERNATIONAL (2018)
Divided Exhaust Period Implementation in a Light-Duty Turbocharged Dual-Fuel RCCI Engine for Improved Fuel Economy and Aftertreatment Thermal Management: A Simulation Study
Anand Nageswaran Bharath et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2018)
An experimental investigation on thermal efficiency of a compression ignition engine fueled with five gasoline-like fuels
Linjun Yu et al.
FUEL (2017)
A comparative study of using diesel and PODEn as pilot fuels for natural gas dual-fuel combustion
Heping Song et al.
FUEL (2017)
A comprehensive review on performance, combustion and emission characteristics of biodiesel fuelled diesel engines
P. Tamilselvan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Review on the management of RCCI engines
Jing Li et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Variable Geometry Turbocharger Technologies for Exhaust Energy Recovery and Boosting-A Review
Adam J. Feneley et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Development of Engine Lubrication System with New Internal Gear Fully Variable Discharge Oil Pump
Michitaka Yamamoto et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2017)
Research Trend of Friction Loss Reduction in Internal Combustion Engines
Yuji Mihara
TRIBOLOGY ONLINE (2017)
Effects of application of variable valve timing on the exhaust gas temperature improvement in a low-loaded diesel engine
Hasan Ustun Basaran et al.
APPLIED THERMAL ENGINEERING (2017)
Optimal exergy-based control of internal combustion engines
M. Razmara et al.
APPLIED ENERGY (2016)
An analytical study of tribological parameters between piston ring and cylinder liner in internal combustion engines
Mohamed Kamal Ahmed Ali et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS (2016)
Optimizing the tribological performance of textured piston ring-liner contact for reduced frictional losses in SI engine: Warm operating conditions
Ali Usman et al.
TRIBOLOGY INTERNATIONAL (2016)
Reducing frictional power losses and improving the scuffing resistance in automotive engines using hybrid nanomaterials as nano-lubricant additives
Mohamed Kamal Ahmed Ali et al.
WEAR (2016)
Robust Design of Spiral Groove Journal Bearing
Subrata Sarkar et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2016)
A Novel Cooling System Control Strategy for Internal Combustion Engines
Teresa Castiglione et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2016)
Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of Temperature Swing Insulation to Direct-Injection Diesel Engines
Yoshifumi Wakisaka et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2016)
The effects of early inlet valve closing and cylinder disablement on fuel economy and emissions of a direct injection diesel engine
J. P. Zammit et al.
ENERGY (2015)
Effects of exhaust gas recycle loop layout and retarded intake valve closing on variations in combustion in a heavy-duty diesel engine
BinYang Wu et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)
Friction Reduction and Reliability for Engines Bearings
Jean-Louis Ligier et al.
LUBRICANTS (2015)
Analysis of the Journal Bearing Friction Losses in a Heavy-Duty Diesel Engine
Christoph Knauder et al.
LUBRICANTS (2015)
A review of recent developments of friction modifiers for liquid lubricants (2007-present)
Zhenglin Tang et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
The Miller cycle effects on improvement of fuel economy in a highly boosted, high compression ratio, direct-injection gasoline engine: EIVC vs. LIVC
Tie Li et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Analysis of engine temperature and energy flow in diesel engine using engine thermal management
Daebong Jung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
Study on Influence of Cylinder Liner Surface Texture on Lubrication Performance for Cylinder Liner-Piston Ring Components
Zhiwei Guo et al.
TRIBOLOGY LETTERS (2013)
Concept of Temperature Swing Heat Insulation in Combustion Chamber Walls, and Appropriate Thermo-Physical Properties for Heat Insulation Coat
Hidemasa Kosaka et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2013)
Investigation on Dimples Distribution Angle in Laser Texturing of Cylinder-Piston Ring System
Jian Zhan et al.
TRIBOLOGY TRANSACTIONS (2012)
Valvetrain Friction - Modeling, Analysis and Measurement of a High Performance Engine Valvetrain System
Michele Calabretta et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2010)
The effect of piston bowl temperature on diesel exhaust emissions
N Ladommatos et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2005)