4.5 Article

Fouling Mitigation of Ion Exchange Membranes in Energy Conversion Devices

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Environmental Sciences

Fouling of ion exchange membranes used in the electrodialysis reversal advanced water treatment: A review

M. A. C. K. Hansima et al.

Summary: Electrodialysis self-reversal (EDR) technology is important for water treatment in domestic and industrial uses, but the impact of natural organic matter and metal ions on ion exchange membrane fouling is not fully understood. Current research focuses on identifying IEM fouling routes, discussing various fouling mechanisms, and evaluating the effectiveness of self-cleaning mechanisms.

CHEMOSPHERE (2021)

Article Energy & Fuels

Understanding Membrane Fouling in Electrically Driven Energy Conversion Devices

Soo-Jin Han et al.

Summary: The study investigates the fouling tendency of positively charged, negatively charged, and non-charged surfactants on ion-exchange membranes. It is found that charged foulants in seawater could significantly foul the membranes, while the worst fouling behavior is observed when charged foulants are present in river streams. Through zeta potential measurement, it is demonstrated that the Debye length of charged foulants decreases in seawater streams due to higher ionic strength, leading to lower net electrostatic effect and less fouling tendency in reverse electrodialysis.

ENERGIES (2021)

Article Biochemistry & Molecular Biology

Electrochemical Impedance Spectroscopy of Anion-Exchange Membrane AMX-Sb Fouled by Red Wine Components

Anton Kozmai et al.

Summary: Electrochemical impedance spectroscopy shows potential for assessing capacitance of interphase boundaries and resistance of foulant layers. Different contact conditions lead to variations in water splitting and resistance, with short-term contact affecting water splitting and longer contact causing biofouling to influence electrolysis.

MEMBRANES (2021)

Article Electrochemistry

Effect of dispersing solvents for ionomers on the performance and durability of catalyst layers in proton exchange membrane fuel cells

Jong-Hyeok Park et al.

Summary: This study investigates the influence of solvents in ionomer dispersions on the performance and durability of catalyst layers in PEMFCs. It shows that using ethylene glycol based ionomer dispersions can lead to the formation of an optimal microstructure with thinner ionomer layer and crack-free surface, resulting in higher performance and durability for PEMFCs. This research provides valuable insights for selecting dispersing solvents for catalyst layers with enhanced performance and durability in PEMFCs.

ELECTROCHIMICA ACTA (2021)

Article Energy & Fuels

Pore-Filled Proton-Exchange Membranes with Fluorinated Moiety for Fuel Cell Application

Hyeon-Bee Song et al.

Summary: Novel pore-filled proton-exchange membranes (PFPEMs) have been developed in this study, combining a partially fluorinated ionomer with high cross-linking density with a porous polytetrafluoroethylene (PTFE) substrate. The prepared PFPEMs showed stable PEMFC performance equivalent to 72% of Nafion 212, with conductivity corresponding to 58-63% of that of Nafion 212. Further lowering membrane resistance is expected to achieve higher fuel cell performance.

ENERGIES (2021)

Article Engineering, Environmental

Active Control of Irreversible Faradic Reactions to Enhance the Performance of Reverse Electrodialysis for Energy Production from Salinity Gradients

Yoontaek Oh et al.

Summary: Increasing the initial output voltage of capacitive RED has an insignificant impact on irreversible faradic reactions, but controlling the cutoff output voltage of CRED effectively avoids irreversible faradic reactions and ensures stable power generation.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Review Energy & Fuels

Redox Flow Batteries: A Literature Review Oriented to Automatic Control

Alejandro Clemente et al.

ENERGIES (2020)

Article Engineering, Chemical

Effects of Divalent Cations on Electrical Membrane Resistance in Reverse Electrodialysis for Salinity Power Generation

Yoontaek Oh et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Engineering, Environmental

Effect of Divalent Cations on RED Performance and Cation Exchange Membrane Selection to Enhance Power Densities

Timon Rijnaarts et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Environmental

CO2 saturated water as two-phase flow for fouling control in reverse electrodialysis

J. Moreno et al.

WATER RESEARCH (2017)

Article Chemistry, Multidisciplinary

Influence of multivalent ions on renewable energy generation in reverse electrodialysis

David A. Vermaas et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Engineering, Environmental

Fouling in reverse electrodialysis under natural conditions

David A. Vermaas et al.

WATER RESEARCH (2013)

Review Agricultural Engineering

A mini-review on membrane fouling

Wenshan Guo et al.

BIORESOURCE TECHNOLOGY (2012)

Review Engineering, Environmental

Recent advances in proton exchange membranes for fuel cell applications

Liwei Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Chemistry, Physical

Performance of solid alkaline fuel cells employing anion-exchange membranes

Jin-Soo Park et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Fouling mitigation of anion exchange membrane by zeta potential control

JS Park et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)

Article Chemistry, Multidisciplinary

A study on fouling mitigation using pulsing electric fields in electrodialysis of lactate containing BSA

HJ Lee et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2002)