☆ 4.5 Article

Design and Modelling of Eco-Friendly CH3NH3SnI3-Based Perovskite Solar Cells with Suitable Transport Layers

ENERGIES (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Direct Surface Passivation of Perovskite Film by 4-Fluorophenethylammonium Iodide toward Stable and Efficient Perovskite Solar Cells

Xiongzhuo Jiang et al.

Summary: Passivating the perovskite layer with organic halide salts directly can reduce film defects and enhance charge transport efficiency, leading to improved device performance and stability. The strategy effectively suppresses nonradiative recombination and reduces recombination losses, resulting in higher device efficiency and good ambient stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Ceramics

High-rate and high conductivity mesoporous TiO2 nano hollow spheres: Synergetic effect of structure and oxygen vacancies

Xinyu Wang et al.

Summary: TiO2 has been proven to be a useful anode material for Li-ion batteries, and specifically TiO2-2 demonstrated synergistic effects in electron and lithium ion transportation, showing greatly enhanced rate performance and stability compared to other TiO2 materials.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency

Shaobing Xiong et al.

Summary: The use of natural additive capsaicin in perovskite solar cells leads to defect passivation and transformation of surface energetics, resulting in improved charge transport, efficiency, and stability. This approach shows potential for significant enhancement of PSC performance.

JOULE (2021)

添加到收藏夹

Article Optics

Effect of interface defects on high efficient perovskite solar cells

Farhad Izadi et al.

Summary: Experimental J-V and external quantum efficiency (EQE) were used to validate the improvement in efficiency of perovskite solar cells (PSC) in this study. The impact of interface properties at the electron transport layer (ETL)/PSK and PSK/hole transport layer (HTL) on open-circuit voltage (Voc) and fill factor (FF) was examined. Optimization of trap defect energy at these interfaces was found to be crucial for enhancing carrier collection in the PSK solar cells.

OPTIK (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Low-temperature-processed metal oxide electron transport layers for efficient planar perovskite solar cells

Jia-Xing Song et al.

Summary: Perovskite solar cells have rapidly developed with efficiencies exceeding 25%, particularly the widely studied metal oxide electron transport layer (ETL) known for its low-cost and excellent optoelectronic properties. The planar structure in PSCs is popular due to simple processing methods and low-temperature preparation, with the focus on recent advancements in using low-temperature-processed MO ETLs.

RARE METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stable tin perovskite solar cells enabled by widening the time window for crystallization

Zhensheng Dai et al.

Summary: A strategy to stabilize Sn perovskite enabled by an amine complex was proposed in this study, addressing the issues of poor crystallization and chemical stability of Sn perovskites. The resulting Sn perovskite films showed enhanced crystallinity and stability compared to those made with conventional additives. The device achieved a higher efficiency and maintained over 90% of the initial efficiency after 1000 hours of light soaking.

SCIENCE CHINA-MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Property Modulation of Two-Dimensional Lead-Free Perovskite Thin Films by Aromatic Polymer Additives for Performance Enhancement of Field-Effect Transistors

Fan Zhang et al.

Summary: In this study, the properties of phenethylammonium tin iodide perovskite thin films were modulated by introducing aromatic polymer additives, leading to improved morphology, crystallization, and inhibition of Sn2+ oxidation. The performance of the field-effect transistors based on the polymer-assisted thin films differed significantly, with one showing improved on-off current ratio and reduced leakage current, while the other exhibited relatively poor overall performance. The use of PVP and PVPD additives also enhanced the chemical stability of the perovskite and operational stabilities of the corresponding transistors.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Monovalent Metal Iodide Additives on the Optoelectric Properties of Two-Dimensional Sn-Based Perovskite Films

Youjin Reo et al.

Summary: This study systematically investigated the lattice structural variation, film properties, and thin-film transistor performance of phenethylammonium tin iodide perovskite by incorporating different monovalent cations. The experimental results showed that the incorporated foreign aliovalent cations were segregated along the grain boundaries instead of doped inside the perovskite lattice. The CuI-(PEA)2SnI4 heterostructure composite channel layers exhibited much improved film properties and device performance compared with the pristine ones.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Physics, Applied

Interface engineering for high-efficiency perovskite solar cells

Han Pan et al.

Summary: This article discusses some suggestions to improve carrier transfer and reduce recombination loss for highly efficient perovskite solar cells, including primary requests on charge carrier transfer dynamics, reasonable design methodologies, and tuning interface interaction between perovskite and charge transport layers.

JOURNAL OF APPLIED PHYSICS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of binary additives in mixed 2D/3D Sn-based perovskite solar cells

Sanjay Sandhu et al.

Summary: The optimal blend of 8 mol% PEAI and 1 mol% EDAI(2) produces a pinhole-free, compact perovskite film with enhanced crystallinity, preferred orientation, low background charge carrier density, reduced trap states, and suppressed recombination losses. This combination improves interlayer coupling for better charge transfer at interfaces, leading to a record power conversion efficiency of 8.47% and enhanced stability of up to 5 days in ambient conditions without additional encapsulation.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic effects of the zinc acetate additive on the performance enhancement of Sn-based perovskite solar cells

Guanqi Tang et al.

Summary: This study successfully demonstrated a strategy to inhibit the formation of Sn2+ vacancies and oxidation in tin-based perovskite solar cells using zinc acetate as an additive. By forming complexes and controlling the crystallization process, the efficiency and air stability of the cells were improved.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress in tin-based perovskite solar cells

Jiupeng Cao et al.

Summary: Organic-inorganic halide perovskite solar cells have shown high efficiency, but many contain toxic lead. Tin-based perovskites are a promising alternative, with the highest efficiency over 13%. This review discusses device design, physical properties, challenges, film preparation techniques, and chemical substitutions to improve the optoelectronic properties of tin-based perovskites and reduce lead content for high-performance and environmentally friendly PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Evidence of improved power conversion efficiency in lead-free CsGeI3 based perovskite solar cell heterostructure via scaps simulation

Abhishek Raj et al.

Summary: The simulation of fully lead-free inorganic cesium germanium tri-iodide perovskite solar cell heterostructure achieved a champion power conversion efficiency of 18.30% and demonstrated significantly improved device parameters. The results showed that the device is perfectly optimized with experimental results, indicating the maximum possible improvement in power conversion efficiency for this type of solar cell.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on the classification of organic/inorganic/carbonaceous hole transporting materials for perovskite solar cell application

Selvakumar Pitchaiya et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design

Xianyuan Jiang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Performance of WO3-Incorporated Carbon Electrodes for Ambient Mesoscopic Perovskite Solar Cells

Shubhranshu Bhandari et al.

ACS OMEGA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulation of the Sb2Se3 solar cell with a hole transport layer

Zhen-Qi Li et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

添加到收藏夹

Review Multidisciplinary Sciences

Compositional and Interface Engineering of Organic-Inorganic Lead Halide Perovskite Solar Cells

Haizhou Lu et al.

ISCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Enhanced performance of planar perovskite solar cells using TiO2/SnO2 and TiO2/WO3 bilayer structures: Roles of the interfacial layers

Mozhgan Kazemzadeh Otoufi et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Engineering, Chemical

Interfacial engineering in lead-free tin-based perovskite solar cells

Zhenxi Wan et al.

Journal of Energy Chemistry (2020)

添加到收藏夹

Proceedings Paper Physics, Condensed Matter

A theoretical comparison between CH3NH3PbI3 and CH3NH3SnI3 based solar cells

Gagandeep et al.

DAE SOLID STATE PHYSICS SYMPOSIUM 2019 (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Simulation and optimization of CH3NH3SnI3 based inverted perovskite solar cell with NiO as Hole transport material

M. S. Shamna et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perovskite-Inspired High Stability Organometal Antimony(V) Halide Thin Films by Post-Deposition Bromination

Hayden Tuohey et al.

ACS MATERIALS LETTERS (2020)

添加到收藏夹

Proceedings Paper Physics, Applied

Device Simulation of Low Cost HTM Free Perovskite Solar Cell Based on TiO2 Electron Transport Layer

Shambhavi Rai et al.

3RD INTERNATIONAL CONFERENCE ON CONDENSED MATTER & APPLIED PHYSICS (ICC-2019) (2020)

添加到收藏夹

Article Chemistry, Physical

Surface passivation of perovskite thin films by phosphonium halides for efficient and stable solar cells

Qingquan He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comprehensive defect study of tungsten disulfide (WS2) as electron transport layer in perovskite solar cells by numerical simulation

K. Sobayel et al.

RESULTS IN PHYSICS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulation of TiO2/CuO solar cells with SCAPS-1D software

P. Sawicka-Chudy et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Uniformity and Stability of Pb-Sn Perovskite Solar Cells via Me4NBr Passivation

Xingzhi Du et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nonradiative Recombination in Perovskite Solar Cells: The Role of Interfaces

Christian M. Wolff et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis, Characterization, and Stability Studies of Ge-Based Perovskites of Controllable Mixed Cation Composition, Produced with an Ambient Surfactant-Free Approach

Shiyu Yue et al.

ACS OMEGA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Device simulation of lead-free MASnI3 solar cell with CuSbS2 (copper antimony sulfide)

Chandni Devi et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Opportunities and Challenges of Lead-Free Perovskite Optoelectronic Devices

Rui Wang et al.

TRENDS IN CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Physical

Low Hysteresis Perovskite Solar Cells Using an Electron-Beam Evaporated W3-x Thin Film as the Electron Transport Layer

Fawad Ali et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Recent advances toward efficient and stable tin-based perovskite solar cells

Qidong Tai et al.

ECOMAT (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A New Method for Fitting Current-Voltage Curves of Planar Heterojunction Perovskite Solar Cells

Peizhe Liao et al.

NANO-MICRO LETTERS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

A New Method for Fitting Current-Voltage Curves of Planar Heterojunction Perovskite Solar Cells

Peizhe Liao et al.

NANO-MICRO LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Stability and charge separation of different CH3NH3SnI3/TiO2 interface: A first-principles study

Zhenzhen Yang et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Iodine chemistry determines the defect tolerance of lead-halide perovskites

Daniele Meggiolaro et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Bistable Amphoteric Native Defect Model of Perovskite Photovoltaics

Wladek Walukiewicz et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Roles of SnX2 (X = F, Cl, Br) Additives in Tin-Based Halide Perovskites toward Highly Efficient and Stable Lead-Free Perovskite Solar Cells

Jin Hyuck Heo et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

A computational approach to interface engineering of lead-free CH3NH3SnI3 highly-efficient perovskite solar cells

Masoud Lazemi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

添加到收藏夹

Article Chemistry, Physical

Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells

Min Chen et al.

JOULE (2018)

添加到收藏夹

Article Chemistry, Physical

Enhanced Performance of Germanium Halide Perovskite Solar Cells through Compositional Engineering

Indira Kopacic et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Different HTM Layers and Electrical Parameters on ZnO Nanorod-Based Lead-Free Perovskite Solar Cell for High-Efficiency Performance

Farhana Anwar et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Printable WO3 electron transporting layer for perovskite solar cells: Influence on device performance and stability

Alexandre Gheno et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Current status of electron transport layers in perovskite solar cells: materials and properties

Khalid Mahmood et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Physical

Spontaneous Passivation of Hybrid Perovskite by Sodium Ions from Glass Substrates: Mysterious Enhancement of Device Efficiency Revealed

Cheng Bi et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and characterization of methylammonium tin iodide layers as photovoltaic absorbers

Manuel Weiss et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency

Hui-Jing Du et al.

CHINESE PHYSICS B (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells

Lung-Chieh Chen et al.

NANOSCALE RESEARCH LETTERS (2016)

添加到收藏夹

Article Energy & Fuels

Tabulated values of the Shockley-Queisser limit for single junction solar cells

Sven Ruhle

SOLAR ENERGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells

Lung-Chieh Chen et al.

NANOSCALE RESEARCH LETTERS (2016)

添加到收藏夹

Editorial Material Energy & Fuels

Stabilizing tin-based perovskites

Kai Shum et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Physics, Applied

Analysis of negative capacitance and self-heating in organic semiconductor devices

Evelyne Knapp et al.

JOURNAL OF APPLIED PHYSICS (2015)

添加到收藏夹

Review Materials Science, Coatings & Films

Recommended values of clean metal surface work functions

Gregory N. Derry et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2015)

添加到收藏夹

Article Chemistry, Physical

Adsorbate enhancement of electron emission during the quenching of metastable CO at metal surfaces

Daniel P. Engelhart et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

添加到收藏夹

Article Energy & Fuels

Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells

Mohammad I. Hossain et al.

SOLAR ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

Theoretical analysis on effect of band offsets in perovskite solar cells

Takashi Minemoto et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lead-free organic-inorganic tin halide perovskites for photovoltaic applications

Nakita K. Noel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

First-Principles Investigation of the TiO2/Organohalide Perovskites Interface: The Role of Interfacial Chlorine

Edoardo Mosconi et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electrical and microstructural properties of thermally annealed Ni/Au and Ni/Pt/Au Schottky contacts on AlGaN/GaN heterostructures

Benedict Ofuonye et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties

Constantinos C. Stoumpos et al.

INORGANIC CHEMISTRY (2013)

添加到收藏夹

Article Chemistry, Physical

Fill factor in organic solar cells

Boyuan Qi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

添加到收藏夹

Article Chemistry, Physical

Sensitivity of the Mott-Schottky Analysis in Organic Solar Cells

Thomas Kirchartz et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

添加到收藏夹

Article Physics, Applied

Structural transformation induced changes in the optical properties of nanocrystalline tungsten oxide thin films

S. K. Gullapalli et al.

APPLIED PHYSICS LETTERS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance analysis of copper-indium-gallium-diselenide (CIGS) solar cells with various buffer layers by SCAPS

Puvaneswaran Chelvanathan et al.

CURRENT APPLIED PHYSICS (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays

Kai Zhu et al.

NANO LETTERS (2007)

添加到收藏夹

Article Physics, Applied

Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells

D Chirvase et al.

JOURNAL OF APPLIED PHYSICS (2003)

添加到收藏夹

Article Physics, Applied

18% efficiency Cd-free Cu(In, Ga)Se2 thin-film solar cells fabricated using chemical bath deposition (CBD)-ZnS buffer layers

T Nakada et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2002)

添加到收藏夹

Article Physics, Applied

Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions

EA Katz et al.

JOURNAL OF APPLIED PHYSICS (2001)

添加到收藏夹

Article Physics, Condensed Matter

Intrinsic limitations to the doping of wide-gap semiconductors

W Walukiewicz

PHYSICA B-CONDENSED MATTER (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.