4.6 Review

The viability of SARS-CoV-2 on solid surfaces

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Cupric Oxide Coating That Rapidly Reduces Infection by SARS-CoV-2 via Solids

Mohsen Hosseini et al.

Summary: The ongoing COVID-19 pandemic has created a demand for coatings that reduce surface infection, and a cupric oxide anti-SARS-CoV-2 coating has been developed with unique features such as rapid inactivation and hydrophilicity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Environmental Sciences

Investigation of SARS CoV-2 virus in environmental surface

Abdollah Dargahi et al.

Summary: Recent studies have shown that SARS-CoV-2 can persist on environmental surfaces, with positive samples detected on surfaces such as door handles, light switches, and cupboards in hospitals, indicating the need for thorough disinfection protocols to prevent the spread of the virus.

ENVIRONMENTAL RESEARCH (2021)

Article Chemistry, Multidisciplinary

Photoactive Antiviral Face Mask with Self-Sterilization and Reusability

Sumit Kumar et al.

Summary: In response to the increased demand for surgical masks during the COVID-19 pandemic, researchers have developed a dual-channel spray-assisted nanocoating hybrid of shellac/copper nanoparticles to enhance the hydrophobicity of nonwoven surgical masks. This innovative coating provides photoactivity for antimicrobial action, allowing the masks to be reusable and self-sterilizing. The photoactive antiviral mask (PAM) design effectively generates heat and free radicals under solar illumination to disrupt virus-like particles, making the masks self-cleaning and reusable for prolonged protection against viral aerosols.

NANO LETTERS (2021)

Article Virology

Inactivation of Human Coronavirus by Titania Nanoparticle Coatings and UVC Radiation: Throwing Light on SARS-CoV-2

Svetlana Khaiboullina et al.

Summary: The global outbreak of COVID-19 caused by SARS-CoV-2 has led to mass vaccinations, but effective disease control strategies and safety precautions remain critical. Photocatalytic self-disinfecting/cleaning surfaces show promise in guiding disinfection policies to control virus spread.

VIRUSES-BASEL (2021)

Article Multidisciplinary Sciences

Stability of SARS-CoV-2 on critical personal protective equipment

Samantha B. Kasloff et al.

Summary: The study provides the first comprehensive assessment of SARS-CoV-2 stability on experimentally contaminated personal protective equipment (PPE) widely used by healthcare workers and the general public. Results showed that the virus can persist for up to 21 days on certain materials, while rapidly degrading on cotton fabric within 24 hours. These findings highlight the importance of proper handling of contaminated PPE in high-risk settings and suggest the potential utility of cotton in limiting COVID-19 transmission.

SCIENTIFIC REPORTS (2021)

Article Polymer Science

Protective Face Mask Filter Capable of Inactivating SARS-CoV-2, and Methicillin-Resistant Staphylococcus aureus and Staphylococcus epidermidis

Miguel Marti et al.

Summary: Face masks are widely accepted as a protective tool against bacterial and viral transmission, but the filters in commercial face masks may not effectively inactivate harmful pathogens. Further research is needed to ensure the safety and proper use of this technology.

POLYMERS (2021)

Article Engineering, Environmental

Longitudinal Monitoring of SARS-CoV-2 RNA on High-Touch Surfaces in a Community Setting

Abigail P. Harvey et al.

Summary: Environmental surveillance of SARS-CoV-2 on high-touch surfaces in a community setting during a COVID-19 outbreak revealed a low risk of infection from contaminated surfaces. The percentage of positive samples from high-touch surfaces predicted variations in COVID-19 cases at the city-level with a 7-day lead time, suggesting that this surveillance method could serve as an early warning tool for monitoring case trends.

ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2021)

Article Environmental Sciences

Copper-impregnated three-layer mask efficiently inactivates SARS-CoV2

Chamith Hewawaduge et al.

Summary: The study found that a copper sulfide nanoparticle three-layer mask can effectively inactivate the SARS-CoV-2 virus, playing an important role in preventing viral transmission.

ENVIRONMENTAL RESEARCH (2021)

Article Infectious Diseases

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and coronavirus disease-2019 (COVID-19): The epidemic and the challenges

Chih-Cheng Lai et al.

INTERNATIONAL JOURNAL OF ANTIMICROBIAL AGENTS (2020)

Article Nanoscience & Nanotechnology

Superhemophobic and Antivirofouling Coating for Mechanically Durable and Wash-Stable Medical Textiles

Anthony J. Galante et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Letter Public, Environmental & Occupational Health

The role of masks and respirator protection against SARS-CoV-2

Qiang Wang et al.

INFECTION CONTROL AND HOSPITAL EPIDEMIOLOGY (2020)

Article Immunology

Simulated Sunlight Rapidly Inactivates SARS-CoV-2 on Surfaces

Shanna Ratnesar-Shumate et al.

JOURNAL OF INFECTIOUS DISEASES (2020)

Article Multidisciplinary Sciences

Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients

Po Ying Chia et al.

NATURE COMMUNICATIONS (2020)

Article Biotechnology & Applied Microbiology

Sars-CoV-2 Envelope and Membrane Proteins: Structural Differences Linked to Virus Characteristics?

Martina Bianchi et al.

BIOMED RESEARCH INTERNATIONAL (2020)

Editorial Material Critical Care Medicine

Small droplet aerosols in poorly ventilated spaces and SARS-CoV-2 transmission

G. Aernout Somsen et al.

LANCET RESPIRATORY MEDICINE (2020)

Article Materials Science, Biomaterials

Antiviral and Antibacterial Nanostructured Surfaces with Excellent Mechanical Properties for Hospital Applications

Jafar Hasan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

Article Multidisciplinary Sciences

Pathogenesis and transmission of SARS-CoV-2 in golden hamsters

Sin Fun Sia et al.

NATURE (2020)

Article Nanoscience & Nanotechnology

A Surface Coating that Rapidly Inactivates SARS-CoV-2

Saeed Behzadinasab et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Public, Environmental & Occupational Health

Susceptibility of SARS-CoV-2 to UV Irradiation

Christiane Silke Heilingloh et al.

AMERICAN JOURNAL OF INFECTION CONTROL (2020)

Article Medicine, General & Internal

Effect of moist heat reprocessing of N95 respirators on SARS-CoV-2 inactivation and respirator function

Simeon C. Daeschler et al.

CANADIAN MEDICAL ASSOCIATION JOURNAL (2020)

Article Public, Environmental & Occupational Health

Dynamics of COVID-19 transmission including indirect transmission mechanisms: a mathematical analysis

A. Meiksin

EPIDEMIOLOGY AND INFECTION (2020)

Review Virology

Using heat to killSARS-CoV-2

John P. Abraham et al.

REVIEWS IN MEDICAL VIROLOGY (2020)

Review Materials Science, Coatings & Films

A review on coronavirus survivability on material's surfaces: present research scenarios, technologies and future directions

Mohammed Adnan Hasan et al.

SURFACE ENGINEERING (2020)

Article Virology

The effect of temperature on persistence of SARS-CoV-2 on common surfaces

Shane Riddell et al.

VIROLOGY JOURNAL (2020)

Editorial Material Medicine, General & Internal

Virology, transmission, and pathogenesis of SARS-CoV-2

Muge Cevik et al.

BMJ-BRITISH MEDICAL JOURNAL (2020)

Article Materials Science, Biomaterials

Antiviral Nanostructured Surfaces Reduce the Viability of SARS-CoV-2

Jafar Hasan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

Letter Oncology

Instantaneous catch-and-kill inactivation of SARS-CoV-2 by nitride ceramics

Giuseppe Pezzotti et al.

CLINICAL AND TRANSLATIONAL MEDICINE (2020)

Article Nanoscience & Nanotechnology

Highly Effective Inactivation of SARS-CoV-2 by Conjugated Polymers and Oligomers

Florencia A. Monge et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Biochemistry & Molecular Biology

Effects of Ozone Treatment on Personal Protective Equipment Contaminated with SARS-CoV-2

Bernardino Clavo et al.

ANTIOXIDANTS (2020)

Article Materials Science, Multidisciplinary

Antimicrobial Copper Cold Spray Coatings and SARS-CoV-2 Surface Inactivation

Bryer C. Sousa et al.

MRS ADVANCES (2020)

Article Biochemistry & Molecular Biology

Potent antiviral effect of silver nanoparticles on SARS-CoV-2

Sundararaj S. Jeremiah et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2020)

Article Environmental Sciences

SARS-CoV-2 RNA detection in the air and on surfaces in the COVID-19 ward of a hospital in Milan, Italy

Katia Razzini et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Mechanics

Cold atmospheric plasma for SARS-CoV-2 inactivation

Zhitong Chen et al.

PHYSICS OF FLUIDS (2020)

Letter Immunology

Prolonged Infectivity of SARS-CoV-2 in Fomites

Boris Pastorino et al.

EMERGING INFECTIOUS DISEASES (2020)

Article Engineering, Manufacturing

Sars-CoV-2 (COVID-19) inactivation capability of copper-coated touch surface fabricated by cold-spray technology

Novana Hutasoit et al.

MANUFACTURING LETTERS (2020)

Letter Infectious Diseases

Stability of SARS-CoV-2 in different environmental conditions

Alex W. H. Chin et al.

LANCET MICROBE (2020)

Letter Immunology

Rapid inactivation of SARS-CoV-2 with deep-UV LED irradiation

Hiroko Inagaki et al.

EMERGING MICROBES & INFECTIONS (2020)

Article Chemistry, Physical

Self-cleaning, stain-resistant and anti-bacterial superhydrophobic cotton fabric prepared by simple immersion technique

Poonam Chauhan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Medicinal

Protein Adsorption, Desorption, and Aggregation Mediated by Solid-Liquid Interfaces

Tatiana Perevozchikova et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

Article Biochemistry & Molecular Biology

Antimicrobial Surfaces Using Covalently Bound Polyallylamine

Dmitri D. Iarikov et al.

BIOMACROMOLECULES (2014)

Article Biochemistry & Molecular Biology

Inactivation of bacterial and viral biothreat agents on metallic copper surfaces

Pauline Bleichert et al.

BIOMETALS (2014)

News Item Public, Environmental & Occupational Health

Copper lowers risk of norovirus outbreaks

[Anonymous]

PERSPECTIVES IN PUBLIC HEALTH (2013)

Article Multidisciplinary Sciences

Inactivation of Norovirus on Dry Copper Alloy Surfaces

Sarah L. Warnes et al.

PLOS ONE (2013)

Article Engineering, Environmental

Highly efficient antiviral and antibacterial activities of solid-state cuprous compounds

Kayano Sunada et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Review Polymer Science

Polymeric materials with antimicrobial activity

Alexandra Munoz-Bonilla et al.

PROGRESS IN POLYMER SCIENCE (2012)

Review Engineering, Chemical

Pore Network Models of Drying, Contact Angle, and Film Flows

Marc Prat

CHEMICAL ENGINEERING & TECHNOLOGY (2011)

Article Engineering, Chemical

A Discussion of the Effect of Tortuosity on the Capillary Imbibition in Porous Media

Jianchao Cai et al.

TRANSPORT IN POROUS MEDIA (2011)

Article Engineering, Chemical

Influence of pore structure on drying kinetics: A pore network study

Thomas Metzger et al.

AICHE JOURNAL (2007)

Article Thermodynamics

On the influence of pore shape, contact angle and film flows on drying of capillary porous media

M. Prat

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Engineering, Chemical

Influence of pore size distribution on drying kinetics: A simple capillary model

T Metzger et al.

DRYING TECHNOLOGY (2005)