☆ 4.7 Article

Concrete-to-concrete interface shear strength prediction based on explainable extreme gradient boosting approach

CONSTRUCTION AND BUILDING MATERIALS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Efficient machine learning models for prediction of concrete strengths

Hoang Nguyen et al.

Summary: An efficient implementation of machine learning models for predicting compressive and tensile strengths of high-performance concrete was presented in this study, with GBR and XGBoost models showing better performance compared to SVR and MLP.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Civil

Explainable extreme gradient boosting tree-based prediction of load-carrying capacity of FRP-RC columns

Abdoulaye Sanni Bakouregui et al.

Summary: This study introduces a new method for predicting the load-carrying capacity of FRP-RC columns using the XGBoost algorithm, outperforming other numerical equations. Important input variables for predicting the maximum axial load-carrying capacity include eccentricity ratio, gross sectional area, compressive strength of concrete, etc.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Review Construction & Building Technology

Machine learning applications for building structural design and performance assessment: State-of-the-art review

Han Sun et al.

Summary: This paper reviews the historical development and recent advances of machine learning in building structural design and performance assessment, including predicting structural response and performance, interpreting experimental data, information retrieval using images and text, and recognizing patterns in structural health monitoring data. The challenges of integrating machine learning into structural engineering practice are identified, along with discussions on future research opportunities.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Interpretable XGBoost-SHAP Machine-Learning Model for Shear Strength Prediction of Squat RC Walls

De-Cheng Feng et al.

Summary: In this study, an advanced machine learning model was trained and interpreted for estimating the shear strengths of squat RC walls, utilizing a database of 434 samples. The model strategically combined the XGBoost algorithm for predictive modeling and the SHAP algorithm for analyzing factor importance. This setup achieved a high level of accuracy in shear strength estimation and provided physical and quantitative interpretations of the input-output dependencies.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Data-Driven Approach to Predict the Plastic Hinge Length of Reinforced Concrete Columns and Its Application

De-Cheng Feng et al.

Summary: The plastic hinge length is a key parameter in the inelastic response of reinforced concrete columns to combined axial and flexural loading. A novel data-driven model based on the AdaBoost algorithm is proposed to predict the plastic hinge length, showing considerably higher prediction accuracy compared to existing methods. Numerical experiments demonstrate that using the predicted plastic hinge length in force-based beam-column models closely resembles laboratory experiments.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Effect of shear reinforcement corrosion on interface shear transfer between concretes cast at different times

Jie Liu et al.

Summary: This paper experimentally investigated the interface shear transfer behavior between concretes cast at different times after shear reinforcement corrosion. The results show that shear reinforcement corrosion leads to a decrease in shear capacity and failure load of cold joints, while increasing interface deformation. Additionally, a more ductile shear transfer behavior was observed after shear reinforcement corrosion.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Implementing ensemble learning methods to predict the shear strength of RC deep beams with/without web reinforcements

De-Cheng Feng et al.

Summary: This paper introduces a practical and comprehensive implementation of ensemble methods for predicting the shear strength of deep beams with or without web reinforcements. The study utilizes four typical ensemble machine learning models and demonstrates their superior performance over traditional machine learning methods in predicting accuracy and discrepancy.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Data-driven shear strength prediction of steel fiber reinforced concrete beams using machine learning approach

Jesika Rahman et al.

Summary: This study presents a data-driven approach to estimating the shear strength of steel fiber reinforced concrete beams, utilizing machine learning models. Among the 11 evaluated models, XGBoost demonstrated the most accurate predictions. Additionally, the study identified the most influential parameters affecting the shear strength of SFRC beams.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Contribution of Shear Reinforcements and Concrete to the Shear Capacity of Interfaces between Concretes Cast at Different Times

Jie Liu et al.

Summary: The study found that in cold joints, concrete significantly contributes to the shear capacity, while the contribution of shear reinforcements is not as significant as expected. The variation in the yield strength of shear reinforcements has no apparent effect on the shear strength and stiffness of cold joints, whereas increasing the concrete compressive strength significantly enhances the shear capacity of cold joints.

KSCE JOURNAL OF CIVIL ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Data-driven model for ternary-blend concrete compressive strength prediction using machine learning approach

Babatunde Abiodun Salami et al.

Summary: This study presents a model using least square support vector machine to predict the compressive strength of ternary-blend concrete, achieving better predictive performance through coupling simulated annealing as an optimization algorithm.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Civil

Shear-friction behavior of concrete-to-concrete interface under direct shear load

Jin Xia et al.

Summary: The study found that increasing reinforcement or normal pressure can enhance the bonding strength, ultimate shear strength, and residual shear strength of concrete-to-concrete interfaces, while also modifying their brittle behavior. However, increasing normal pressure has minimal impact on the elastic stiffness and plastic ductility of the specimens. The calculated ultimate strengths from different models were all conservative, with friction being the most affected property during the shear-slip process.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach

De-Cheng Feng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Shear friction performance between high strength concrete (HSC) and ultra high performance concrete (UHPC) for bridge connection applications

Ali A. Semendary et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Data-driven machine-learning-based seismic failure mode identification of reinforced concrete shear walls

Sujith Mangalathu et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Failure mode classification and bearing capacity prediction for reinforced concrete columns based on ensemble machine learning algorithm

De-Cheng Feng et al.

ADVANCED ENGINEERING INFORMATICS (2020)

添加到收藏夹

Article Engineering, Civil

Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach

Sujith Mangalathu et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Compressive strength prediction of high-performance concrete using gradient tree boosting machine

Mosbeh R. Kaloop et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Machine learning framework for predicting failure mode and shear capacity of ultra high performance concrete beams

Roya Solhmirzaei et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Regional Seismic Risk Assessment of Infrastructure Systems through Machine Learning: Active Learning Approach

Sujith Mangalathu et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Predicting the compressive strength of concrete from its compositions and age using the extreme gradient boosting method

Tuan Nguyen-Sy et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Stripe-based fragility analysis of multispan concrete bridge classes using machine learning techniques

Sujith Mangalathu et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2019)

添加到收藏夹

Article Engineering, Civil

Evaluation of Design Provisions for Interface Shear Transfer between Concretes Cast at Different Times

Jie Liu et al.

JOURNAL OF BRIDGE ENGINEERING (2019)

添加到收藏夹

Article Engineering, Civil

Classification of failure mode and prediction of shear strength for reinforced concrete beam-column joints using machine learning techniques

Sujith Mangalathu et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Review Engineering, Civil

Emerging artificial intelligence methods in structural engineering

Hadi Salehi et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Effect of High-Strength Reinforcement Steel on Shear Friction Behavior

Andre R. Barbosa et al.

JOURNAL OF BRIDGE ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

Interface shear behavior between high-strength precast girders and lightweight cast-in-place slabs

Haibo Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Effect of joint interface conditions on shear transfer behavior of recycled aggregate concrete

Jianzhuang Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Engineering, Civil

Shear-Friction Behavior of Groove Interface in Concrete Bridge Rehabilitation

Haibo Jiang et al.

JOURNAL OF BRIDGE ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Push-Off Tests in the Study of Cyclic Behavior of Interfaces between Concretes Cast at Different Times

Diogo Figueira et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Push-Off Tests in the Study of Cyclic Behavior of Interfaces between Concretes Cast at Different Times

Diogo Figueira et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Civil

Prediction of shear strength of FRP-reinforced concrete flexural members without stirrups using artificial neural networks

S. Lee et al.

ENGINEERING STRUCTURES (2014)

添加到收藏夹

Article Construction & Building Technology

Interface shear transfer of lightweight-aggregate concretes cast at different times

Dane M. Shaw et al.

PCI JOURNAL (2014)

添加到收藏夹

Review Engineering, Civil

A state-of-the-art review on shear-friction

Pedro M. D. Santos et al.

ENGINEERING STRUCTURES (2012)

添加到收藏夹

Article Construction & Building Technology

Neural network based approach for determining the shear strength of circular reinforced concrete columns

Naci Caglar

CONSTRUCTION AND BUILDING MATERIALS (2009)

添加到收藏夹

Article Statistics & Probability

Greedy function approximation: A gradient boosting machine

JH Friedman

ANNALS OF STATISTICS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.