4.7 Article

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Recycling industrial slags in production of fired clay bricks for sustainable manufacturing

Osman Gencel et al.

Summary: This article investigates the performance of fired clay bricks incorporating different kinds of industrial slags and finds that these bricks have high compressive strength, porosity, and weather resistance, making them suitable for structural applications.

CERAMICS INTERNATIONAL (2021)

Article Construction & Building Technology

Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze-thaw

Oguzhan Yavuz Bayraktar et al.

Summary: This study experimentally investigated the effects of cement dosage and waste tire rubber as aggregate on the properties of foam concrete. The results showed that increasing cement dosage improved compressive strength, and SF blended mixture with 500 kg/m3 cement content and 20 kg/m3 foam content exhibited the best resistance to abrasion, F-T cycles, and acid attack.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effect of concrete unit weight on the mechanical properties of bottom ash aggregate concrete

Yong-Hyok Kim et al.

Summary: The depletion of natural aggregates is a pressing issue in many regions, with bottom ash identified as a potential replacement material for concrete. The study focused on evaluating the mechanical properties of concrete with different ratios of bottom ash aggregate, providing valuable data for future structural design models.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Characterization of light foamed concrete containing fly ash and desulfurization gypsum for wall insulation prepared with vacuum foaming process

Hongyu Gao et al.

Summary: The study showed that the foam expansion ratio of vacuum-foamed concrete is influenced by experimental parameters under vacuum and atmospheric conditions, and the increase in vacuum degree improves the properties of the concrete. Different pore sizes and numbers also impact the performance of the foamed concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Influence of foaming agent on cement and foam concrete

Li Hou et al.

Summary: In the preparation of foam concrete, the interaction between foaming agent and cement plays a key role, while the property of the gas-liquid interface is the most important factor affecting the performance of foam concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Valorizing the waste bottom ash for improving anaerobic digestion performances towards a Win-Win strategy between biomass power generation and biomethane production

Qin Xiao et al.

Summary: The addition of bottom ash significantly improved the digestion performance of kitchen waste and fruit/vegetable waste, leading to increased methane production and stabilized pH of the digestate. This was attributed to the buffering capacity of bottom ash and the promotion of Methanosarcina abundance, indicating enhanced direct interspecific electron transfer. Ultimately, this novel solution could facilitate the efficient anaerobic digestion of food waste and create a "Win-Win" strategy for sustainable bioenergy industries.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks

Muhammad Junaid Munir et al.

Summary: This study investigates the effects of glass sludge, marble sludge, and rice husk on the physical, mechanical, durability, and thermal properties of brick samples. The results show that the addition of these waste materials reduces shrinkage, weight, and thermal conductivity of the brick samples, making them suitable for moderate weather-resistant environments and reducing landfill waste. The leaching toxicity values of the brick samples are much lower than the specified limits, indicating the potential for sustainable masonry construction with eco-friendly bricks.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Engineering, Environmental

Application of waste tire rubber and recycled aggregates in concrete products: A new compression casting approach

Syed Minhaj Saleem Kazmi et al.

Summary: The study focuses on developing eco-friendly green concrete with performance similar to normal aggregate concrete by using recycled aggregates and waste tire chipped rubber. An innovative concrete casting approach is followed to achieve similar strength to traditional concrete, promoting the efficient utilization of recycled aggregates and rubber.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Engineering, Environmental

Study on the durability and failure mechanism of concrete modified with nanoparticles and polypropylene fiber under freeze-thaw cycles and sulfate attack

Jingge Ren et al.

Summary: The study found that adding polypropylene fiber to concrete significantly improves durability, while nanoparticles can only enhance durability in the short term. Pore characteristics were identified as the most important factor affecting the durability of concrete.

COLD REGIONS SCIENCE AND TECHNOLOGY (2021)

Article Construction & Building Technology

Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study

Osman Gencel et al.

Summary: The study investigates the engineering performance of no-clay bricks made with water treatment sludge (WTS), glass, and marble wastes. The experimental results show that these bricks have high compressive strength, thermal conductivity, durability, and water resistance, meeting the requirements of international building codes.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag

Oguzhan Yavuz Bayraktar et al.

Summary: This study focused on investigating the physico-mechanical, durability, and thermal properties of basalt fibers reinforced foamed concrete containing waste marble powder and ground granulated blast furnace slag. Results indicated significant enhancements in compressive and flexural strength were achieved with the addition of WMP and BF, with the best performance observed with 30% GGBFS and 1% BF.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze-thaw cycles

Osman Gencel et al.

Summary: The experimental program evaluated the impact of rice husk ash (RHA) as cement replacement and waste marble powder (WMP) as sand replacement on the properties of foamed concrete exposed to high temperature and freeze-thaw cycles. Results showed that the best performance was achieved with 10% RHA and 50% WMP at a late-age of 90 days. The durability of concrete was significantly affected by the use of RHA and WMP as substitutes. Water-cooled specimens exhibited greater strength loss after exposure to high temperatures, while the mixture containing 10% RHA and no WMP performed worst in the freeze-thaw tests.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Axial Stress-Strain Performance of Recycled Aggregate Concrete Reinforced with Macro-Polypropylene Fibres

Muhammad Junaid Munir et al.

Summary: The addition of macro-polypropylene fibers improves the stress-strain performance of concrete, particularly in recycled aggregate concrete. Increasing the dosage of fibers enhances the energy dissipation capacity and peak stress and strain of concrete samples. The negative effects of coarse recycled aggregates can be minimized by adding macro-polypropylene fibers, leading to an overall improvement in the properties of the concrete samples.

SUSTAINABILITY (2021)

Article Construction & Building Technology

Recycling waste concretes as fine aggregate and fly ash as binder in production of thermal insulating foam concretes

Osman Gencel et al.

Summary: By incorporating fine recycled concrete aggregate, foam concretes showed a slight increase in porosity and absorption, while a decrease in dynamic elastic modulus, ultrasound, and thermal conductivity. The findings suggest the potential use of this material for producing lightweight construction materials with significant environmental benefits.

JOURNAL OF BUILDING ENGINEERING (2021)

Review Construction & Building Technology

Coal bottom ash as sand replacement in concrete: A review

Khairunisa Muthusamy et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Experimental study on mechanical properties and durability of basalt fiber reinforced coral aggregate concrete

Ditao Niu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate

Osman Hulusi Oren et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Evaluation of thermal conductivity of cement-based foam reinforced with polypropylene fibers

Farnaz Batool et al.

MATERIALS AND STRUCTURES (2020)

Article Construction & Building Technology

Stress strain performance of steel spiral confined recycled aggregate concrete

Muhammad Junaid Munir et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Mechanical and durability properties of hybrid fiber reinforced foam concrete

Bhagyasree Raj et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

Effect of compression casting method on the compressive strength, elastic modulus and microstructure of rubber concrete

Yu-Fei Wu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Environmental

Effect of different aggregate treatment techniques on the freeze-thaw and sulfate resistance of recycled aggregate concrete

Syed Minhaj Saleem Kazmi et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2020)

Article Construction & Building Technology

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Fuat Koksal et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effects of concrete waste on characteristics of structural fired clay bricks

Osman Gencel et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of recycled aggregate treatment techniques on the durability of concrete: A comparative evaluation

Syed Minhaj Saleem Kazmi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Study on engineering properties of foam concrete containing waste seashell

Yan Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Concurrent effects of recycled aggregates and polypropylene fibers on workability and key strength properties of self-consolidating concrete

Pierre Matar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Construction & Building Technology

Cellular concrete review: New trends for application in construction

Lina Chica et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Construction & Building Technology

Physical and functional characteristics of foam concrete: A review

Amritha Raj et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production

Mucahit Sutcu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

Axial stress-strain behavior of macro-synthetic fiber reinforced recycled aggregate concrete

Syed Minhaj Saleem Kazmi et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Materials Science, Multidisciplinary

Effects of Polypropylene Fibers on the Physical and Mechanical Properties of Recycled Aggregate Concrete

Pierre Matar et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2019)

Article Construction & Building Technology

Enhancing the strength of pre-made foams for foam concrete applications

Ailar Hajimohammadi et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

Numerical study on the effect of pore shapes on the thermal behaviors of cellular concrete

Wei She et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes

Syed Minhaj Saleem Kazmi et al.

ENERGY AND BUILDINGS (2018)

Article Green & Sustainable Science & Technology

Thermally efficient fired clay bricks incorporating waste marble sludge: An industrial-scale study

Muhammad Junaid Munir et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Thermal performance evaluation of eco-friendly bricks incorporating waste glass sludge

Syed Minhaj Saleem Kazmi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Construction & Building Technology

Development of Eco-Friendly Fired Clay Bricks Incorporating Recycled Marble Powder

Muhammad J. Munir et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Article Construction & Building Technology

Effect of macro-synthetic fibers on the fracture energy and mechanical behavior of recycled aggregate concrete

Syed Minhaj Saleem Kazmi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete

Chao Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Feasibility of Using Waste Glass Sludge in Production of Ecofriendly Clay Bricks

Syed M. S. Kazmi et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Article Construction & Building Technology

Efficiency of waste marble powder in controlling alkali-silica reaction of concrete: A sustainable approach

Muhammad Junaid Munir et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction

Syed Minhaj Saleem Kazmi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Air-void size distribution of cement based foam and its effect on thermal conductivity

Farnaz Batool et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Potential of rice husk ash for mitigating the alkali-silica reaction in mortar bars incorporating reactive aggregates

Safeer Abbas et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete

Zuhua Zhang et al.

CEMENT & CONCRETE COMPOSITES (2015)

Review Construction & Building Technology

Properties and applications of foamed concrete; a review

Y. H. Mugahed Amran et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Multidisciplinary

Influence of Bottom Ash Replacements as Fine Aggregate on the Property of Cellular Concrete with Various Foam Contents

Patchara Onprom et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)

Article Construction & Building Technology

High performance concrete under elevated temperatures

Abdullah Huzeyfe Akca et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Proceedings Paper Materials Science, Multidisciplinary

Effects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC)

Ahmad Farhan Roslan et al.

ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY (2012)

Article Construction & Building Technology

Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete

H. K. Kim et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Review Construction & Building Technology

Influence of coal bottom ash as fine aggregate on fresh properties of concrete

L. B. Andrade et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Construction & Building Technology

Shrinkage Behavior of Foam Concrete

E. K. Kunhanandan Nambiar et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)

Article Construction & Building Technology

Aspects of moisture kinetics of coal bottom ash in concrete

L. B. Andrade et al.

CEMENT AND CONCRETE RESEARCH (2007)

Article Construction & Building Technology

Models relating mixture composition to the density and strength of foam concrete using response surface methodology

E. K. Kunhanandan Nambiar et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Construction & Building Technology

Influence of filler type on the properties of foam concrete

E. K. Kunhanandan Nambiar et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Construction & Building Technology

Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement

CG Han et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

A method for assessment of the freeze-thaw resistance of preformed foam cellular concrete

PJ Tikalsky et al.

CEMENT AND CONCRETE RESEARCH (2004)