4.7 Article

Fabrication of bimetallic metal-organic frameworks derived Fe3O4/C decorated graphene composites as high-efficiency and broadband microwave absorbers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Two birds with one stone: Superhelical chiral polypyrrole towards high-performance electromagnetic wave absorption and corrosion protection

Hesong Ren et al.

Summary: Finding high-efficiency microwave absorbing materials with corrosion resistance is crucial for enhancing environmental adaptability and survivability of military targets in harsh chemical environments. The synthesis of superhelical chiral polypyrrole nanofibers offers promising high-performance anticorrosive microwave absorbers, capable of enhancing impedance matching and electromagnetic wave attenuation through enhanced dielectric and magnetic losses.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Thickness-controllable synthesis of MOF-derived Ni@N-doped carbon hexagonal nanoflakes with dielectric-magnetic synergy toward wideband electromagnetic wave absorption

Liqiang Jin et al.

Summary: By controlling the adding dosage of pyridine, thickness controllable MOF-derived Ni@N-doped carbon (Ni@NC) hexagonal nanoflakes with increased content of doped N atoms and tunable morphology were obtained. The controllable dimension and morphology of N-doped carbon skeleton endowed more electronic transportation paths, better anti-reflection surfaces, higher conduction loss and polarization relaxation, while the evenly distributed Ni nanoparticles provided considerable multiple resonances and eddy current for improved electromagnetic wave absorption.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Ceramics

Cu2O@nanoporous carbon composites derived from Cu-based MOFs with ultrabroad-bandwidth electromagnetic wave absorbing performance

Huili Yang et al.

Summary: This study successfully addresses the impedance mismatch issue of carbon-based materials in the field of microwave absorption by synthesizing Cu2O@nanoporous carbon composites. This results in superior ultrabroad-bandwidth absorptivity, offering a new opportunity for obtaining ultrabroad effective bandwidth.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

Self-assembly sandwich-like Fe, Co, or Ni nanoparticles/reduced graphene oxide composites with excellent microwave absorption performance

Wanxi Li et al.

Summary: This study successfully prepared sandwich-like Fe, Co, or Ni nanoparticles/reduced graphene oxide composites with good microwave absorption performance. For Co/RGO composites, the minimum reflection loss value was -50.60 dB, covering the X-band and Ku-band, suitable for large-scale production and industrial applications.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Environmental

1D-3D mixed-dimensional MnO2@nanoporous carbon composites derived from Mn-metal organic framework with full-band ultra-strong microwave absorption response

Huili Yang et al.

Summary: This study investigates the influence of bandgap on the microwave dielectric behavior of Mn-MOF derivatives and successfully fabricates MOF-derived NPC composites with full-band MA performance. The three-dimensional MnO@NPC composites show excellent low-frequency MA ability, while the 1D-3D mixed-dimensional MnO2@NPC composites achieve ultra-strong MA response across the full band.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Multidisciplinary

A review of three-dimensional graphene-based aerogels: Synthesis, structure and application for microwave absorption

Dandan Zhi et al.

Summary: Graphene aerogels with unique properties have attracted considerable attention, especially in high-performance electromagnetic wave attenuation. The three-dimensional network and incorporation of other lossy materials contribute to the improvement of microwave absorption efficiency. Current research focuses on synthetic strategies, structural characteristics, and multifunctional microwave absorbing materials based on graphene aerogels.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Multidisciplinary

Constructing flower-like core@shell MoSe2-based nanocomposites as a novel and high-efficient microwave absorber

Jingjing Zhang et al.

Summary: A high-efficiency flowerlike FeSe2@MoSe2 core@shell nanocomposite was synthesized through a simple in situ hydrothermal reaction, demonstrating optimal reflection loss values and effective frequency bandwidth for electromagnetic wave attenuation. The nanocomposite showed extraordinary absorption capabilities and broad absorption bandwidth with very thin matching thicknesses, making it a desirable candidate for high-performance microwave absorption materials.

COMPOSITES PART B-ENGINEERING (2021)

Review Nanoscience & Nanotechnology

A Review on Metal-Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials

Zhiwei Zhang et al.

Summary: The development of microwave absorption materials (MAMs) is crucial due to the threat electromagnetic waves pose to human health. Metal-organic frameworks (MOFs) have been highly studied for their diverse properties and ability to transform into porous carbon (PC). Researchers are exploring ways to improve absorption performance by coupling MOFs with other materials.

NANO-MICRO LETTERS (2021)

Article Nanoscience & Nanotechnology

Nitrogen-Doping-Regulated Electromagnetic Wave Absorption Properties of Ultralight Three-Dimensional Porous Reduced Graphene Oxide Aerogels

Ruiwen Shu et al.

Summary: The nitrogen-doped RGO aerogels (NGAs) synthesized in this study exhibit excellent electromagnetic wave absorption performance, with possible absorption mechanisms proposed.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Chemistry, Multidisciplinary

Growth of NiAl-Layered Double Hydroxide on Graphene toward Excellent Anticorrosive Microwave Absorption Application

Xuefei Xu et al.

Summary: The newly developed NiAl-LDH/G composite, synthesized by atomic-layer-deposition-assisted in situ growth, exhibits excellent microwave absorption performance and corrosion resistance, showing great potential for practical applications.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Fabrication of three-dimensional nitrogen-doped reduced graphene oxide/tin oxide composite aerogels as high-performance electromagnetic wave absorbers

Lanlan Deng et al.

Summary: The nitrogen-doped reduced graphene oxide/tin oxide composite aerogels with unique 3D porous network structure were successfully prepared for efficient electromagnetic wave absorption, exhibiting lightweight characteristics and high absorption performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

MOFs derived magnetic porous carbon microspheres constructed by core-shell Ni@C with high-performance microwave absorption

Sai Gao et al.

Summary: In this study, a series of MOFs derived magnetic porous carbon microspheres with tunable diameter and high specific surface area have been successfully synthesized via a pyrolysis process. These carbon microspheres exhibit high-performance microwave absorption with low filler loading, showing potential for practical applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Composites

Two birds with one stone: Graphene oxide@sulfonated polyaniline nanocomposites towards high-performance electromagnetic wave absorption and corrosion protection

Huagao Wang et al.

Summary: The GO@CSA-PANi nanocomposites demonstrate excellent EMW absorption performance with high absorption capacity and broadband characteristics, while also exhibiting long-term corrosion resistance capabilities.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Materials Science, Composites

Metal organic frameworks-derived iron carbide/ferroferric oxide/carbon/reduced graphene oxide nanocomposite with excellent electromagnetic wave absorption properties

Weijie Li et al.

Summary: A novel Fe2C/Fe3O4/C/RGO nanocomposite with optimized filler content demonstrated outstanding electromagnetic wave absorption properties, showing minimal reflection loss at -60 dB at 10.8 GHz and a broad absorption bandwidth of 5.0 GHz in the X-band. The fabricated nanocomposite could be promising lightweight and high-efficient absorbers in the field of EMW absorption.

COMPOSITES COMMUNICATIONS (2021)

Review Chemistry, Multidisciplinary

Diverse Metal-Organic Framework Architectures for Electromagnetic Absorbers and Shielding

Jin-Cheng Shu et al.

Summary: Metal-organic frameworks (MOFs) and their derivatives have unique 3D microstructures and enhanced electromagnetic properties, showing vast potential in electromagnetic functional materials and devices, drawing significant attention from both domestic and foreign researchers. Research focuses on the design strategy of MOF monomers and systematically analyzing the electromagnetic response mechanism, with an emphasis on their applications in microwave absorption and electromagnetic interference shielding. A clear insight into the rapidly growing field is provided, along with a summary and prediction of current challenges and future research directions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Lightweight Ni Foam-Based Ultra-Broadband Electromagnetic Wave Absorber

Ming Qin et al.

Summary: In this study, lightweight Ni foam with NiO/NiFe2O4 in situ growth composites were fabricated to address the issues of poor dispersibility and chemical stability in metal-based electromagnetic wave absorbing materials. The foam structure and NiO/NiFe2O4/Ni components were found to synergistically enhance the EM wave absorption capacity. This work sheds light on the synergistic effect of structure and components on EM wave absorption behaviors, offering a new pathway for preparing lightweight and high-performance metal-based EM wave absorbers.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Composites

Magnetic TiN composites for efficient microwave absorption: Nanoribbons vs nanoparticles

Yupeng Shi et al.

Summary: The study introduces efficient microwave absorbers consisting of TiN/Fe2Ni2N nanoribbons and nanoparticles, which improve performance by tuning and optimizing dielectric and magnetic loss. The absorber achieves lightweight at low filler content and improves reflection loss at high filler content.

COMPOSITES COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Fabrication of Hollow Cube Dual-Semiconductor Ln2O3/MnO/C Nanocomposites with Excellent Microwave Absorption Performance

Zhongjing Shen et al.

Summary: Metal-organic frameworks (MOFs) have been utilized as precursors for highly effective microwave absorbers, but the challenge remains in fabricating thin, lightweight, well-organized nanostructures with strong microwave absorption capability and wide absorption bandwidth. This study successfully fabricated hollow cube dual-semiconductor Ln(2)O(3)/MnO/C nanocomposites via one-step high-temperature carbonization of Ln-Mn-MOFs, with Gd2O3/MnO/C-800 showing superior microwave absorption capacity. The research also investigated the impact of temperature on the microwave absorption properties of Gd2O3/MnO/C, revealing an ultrahigh bandwidth of 6.6 GHz.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Polymetallic MOF-derived corn-like composites for magnetic-dielectric balance to facilitate broadband electromagnetic wave absorption

Zhongjing Shen et al.

Summary: By introducing specific metallic elements into the material, the permeability and impedance matching performance can be improved, thereby enhancing the broadband electromagnetic wave absorption performance of the material.

CARBON (2021)

Article Chemistry, Physical

Hierarchical Fe3O4/Fe@C@MoS2 core-shell nanofibers for efficient microwave absorption

Zhouyu Tong et al.

Summary: Hierarchical structured Fe3O4/Fe@C@MoS2 nanofibers with excellent microwave absorption properties were successfully prepared in this study, providing a new insight for the design of high-performance microwave absorption materials in the future.

CARBON (2021)

Article Chemistry, Physical

Recent advances in graphene-based films for electromagnetic interference shielding: Review and future prospects

Yao Chen et al.

Summary: With the development of electronic information technology, electromagnetic shielding materials have become important in solving problems caused by electromagnetic waves, with graphene attracting significant attention for its outstanding properties.

CARBON (2021)

Article Engineering, Environmental

Enhanced dielectric polarization from disorder-engineered Fe3O4@black TiO2-x heterostructure for broadband microwave absorption

Xiaofeng Shi et al.

Summary: A novel core-shell Fe3O4@black TiO2-x (Fe3O4@b-TiO2-x) heterostructure with unique multi-interfacial structure was successfully fabricated via a surface treatment strategy in vacuum, exhibiting a broadband microwave absorption capability. The enhanced microwave attenuation is attributed to the introduction of outer disordered TiO2-x thin layer and the multiple interfaces constructed by Fe3O4-TiO2 and TiO2-TiO2-x, as well as defect dipoles encapsulated within black TiO2-x layer. This design may pave a way to design broadband microwave absorbers based on core-shell functional structure.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Manufacturing

Fabrication of yolk-shell NiCo alloy@C composites derived from trimetallic metal-organic frameworks as light-weight and high-performance electromagnetic wave absorbers

Ruiwen Shu et al.

Summary: NiCo alloy@C (NCC) composites with a unique yolk-shell structure were fabricated through high-temperature pyrolysis, showing the potential to regulate electromagnetic parameters and absorption capacity by adjusting the carbonization temperature and filler contents. The achieved NCC composite demonstrated the integrated optimal absorption capacity with minimum reflection loss under an ultrathin thickness and wide absorption bandwidth, with underlying absorption mechanisms revealed.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Chemistry, Physical

Constructing macroporous C/Co composites with tunable interfacial polarization toward ultra-broadband microwave absorption

Lei Wang et al.

Summary: By optimizing the surface area value, macroporous C/Co composites with high microwave absorbing performance were successfully fabricated, exhibiting wide effective absorbing bandwidth and low filler loading.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Review Nanoscience & Nanotechnology

Carbon-Based MOF Derivatives: Emerging Efficient Electromagnetic Wave Absorption Agents

Xue Zhang et al.

Summary: Metal-organic framework (MOF) derivatives show great potential in the field of electromagnetic wave (EMW) absorption due to their unique properties, satisfying diverse application requirements. Despite facing challenges, MOF derivatives exhibit outstanding performance in light weight, broad bandwidth, and robust loss capacity, offering possibilities for further research and development.

NANO-MICRO LETTERS (2021)

Article Engineering, Environmental

A MOFs-derived 3D superstructure nanocomposite as excellent microwave absorber

Jun Zhou et al.

Summary: The study developed a novel 3D superstructure composite material, successfully synthesizing a material with excellent microwave absorption properties that can effectively prevent electromagnetic wave radiation pollution.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Constructing a nitrogen-doped carbon and nickel composite derived from a mixed ligand nickel-based a metal-organic framework toward adjustable microwave absorption

Yun Qiu et al.

Summary: The study demonstrated the synthesis of a mixed ligand nickel metal-organic framework (ML-Ni MOF) for preparing nitrogen-doped carbon and nickel composite (ML-Ni/C) with excellent microwave absorption performance, paving a new way for fabricating absorbers.

NANOSCALE (2021)

Article Chemistry, Multidisciplinary

Synthesis of nitrogen-doped reduced graphene oxide/cobalt-zinc ferrite composite aerogels with superior compression recovery and electromagnetic wave absorption performance

Ruiwen Shu et al.

Summary: Nitrogen-doped reduced graphene oxide/cobalt-zinc ferrite composite aerogels with a 3D porous netlike structure have been successfully synthesized and shown to possess excellent electromagnetic wave absorption performance. The potential absorption mechanisms were also revealed, indicating the synergistic effects of various factors contributing to the absorption capabilities of the composite aerogels.

NANOSCALE (2021)

Article Engineering, Environmental

Hollow Ni/C microspheres derived from Ni-metal organic framework for electromagnetic wave absorption

Yun Qiu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Manufacturing

Fabrication and investigation on ternary heterogeneous MWCNT@TiO2-C fillers and their silicone rubber wave-absorbing composites

Jia Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Environmental

Controlled reduction synthesis of yolk-shell magnetic@void@C for electromagnetic wave absorption

Shengtao Gao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Heterogeneous iron-nickel compound/RGO composites with tunable microwave absorption frequency and ultralow filler loading

Miaomiao Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Article Chemistry, Physical

Reduced graphene oxide wrapped cube-like ZnSnO3 : As a high-performance microwave absorber

Yuanchun Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Nanoscience & Nanotechnology

High-Performance Electromagnetic Wave Absorbers Based on Two Kinds of Nickel-Based MOF-Derived Ni@C Microspheres

Jing Yan et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Multidisciplinary

Preparation of magnetic flower-like carbon-matrix composites with efficient electromagnetic wave absorption properties by carbonization of MIL-101(Fe)

Shisi Peng et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Article Nanoscience & Nanotechnology

NiCo Alloy/Carbon Nanorods Decorated with Carbon Nanotubes for Microwave Absorption

Lei Wang et al.

ACS APPLIED NANO MATERIALS (2019)

Article Engineering, Environmental

A facile fabrication and highly tunable microwave absorption of 3D flower-like Co3O4-rGO hybrid-architectures

Junru Ma et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Composition Design and Structural Characterization of MOF-Derived Composites with Controllable Electromagnetic Properties

Wei Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Chemistry, Physical

Design of porous C@Fe3O4 hybrid nanotubes with excellent microwave absorption

Fanbin Meng et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Materials Science, Multidisciplinary

Small magnetic nanoparticles decorating reduced graphene oxides to tune the electromagnetic attenuation capacity

Jun-Zhe He et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Article Nanoscience & Nanotechnology

MOF-Derived Porous Co/C Nanocomposites with Excellent Electromagnetic Wave Absorption Properties

Yinyun Lu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Materials Science, Multidisciplinary

Microwave-assisted synthesis of graphene-Ni composites with enhanced microwave absorption properties in Ku-band

Zetao Zhu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)

Article Materials Science, Multidisciplinary

A novel rod-like MnO2@Fe loading on graphene giving excellent electromagnetic absorption properties

Hualiang Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Article Materials Science, Multidisciplinary

Microwave electromagnetic characteristics of a microcoiled carbon fibers/paraffin wax composite in Ku band

JH Du et al.

JOURNAL OF MATERIALS RESEARCH (2002)