相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A review of numerical analyses and experimental characterization methods for forming of textile reinforcements
Biao Liang et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
Influence of cooling rate on the properties of carbon fiber unidirectional composites with polypropylene, polyamide 6, and polyphenylene sulfide matrices
I. Taketa et al.
ADVANCED COMPOSITE MATERIALS (2020)
Comparing Test Methods for the Intra-ply Shear Properties of Uncured Prepreg Tapes
Klaus Heller et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2020)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Towards the combination of automated lay-up and stamp forming for consolidation of tailored composite components
Tjitse K. Slange et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Multi-scale modeling of mechanical behavior of cured woven textile composites accounting for the influence of yarn angle variation
Biao Liang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Consolidation Modeling during Thermoforming of Thermoplastic Composite Prepregs
Hu Xiong et al.
MATERIALS (2019)
Experimental and numerical analysis of wrinkling during forming of multilayered textile composites
E. Guzman-Maldonado et al.
COMPOSITE STRUCTURES (2019)
Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model
Lisa M. Dangora et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)
Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods A review
Khaled Yassin et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Thermostamping of [0/90]n carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation
Abdelhaq Benkaddour et al.
POLYMER COMPOSITES (2018)
A lamination model for forming simulation of woven fabric reinforced thermoplastic prepregs
Youkun Gong et al.
COMPOSITE STRUCTURES (2018)
Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components
Luise Kaerger et al.
COMPOSITE STRUCTURES (2018)
Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Draping simulation of carbon/epoxy plain weave fabrics with non-orthogonal constitutive model and material behavior analysis of the cured structure
Min-Gu Han et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Deconsolidation of C/PEEK blanks: on the role of prepreg, blank manufacturing method and conditioning
T. K. Slange et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Numerical forming of continuous fibre reinforced composite material: A review
Philippe Bussetta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations
P. Boisse et al.
COMPOSITES PART B-ENGINEERING (2018)
A Review on the Mechanical Modeling of Composite Manufacturing Processes
Ismet Baran et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
Curvature determination in the bending test of continuous fibre reinforcements
B. Liang et al.
STRAIN (2017)
The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review
P. Boisse et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Bending behavior of multilayered textile composite prepregs: Experiment and finite element modeling
Hassan Alshahrani et al.
MATERIALS & DESIGN (2017)
Modeling and Validation of Gripper Induced Membrane Forces in Finite Element Forming Simulation of Continuously Reinforced Composites
Christian Poppe et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Thermoforming of Glass Fibre Reinforced Polypropylene: A Study on the Influence of Different Process Parameters
Alexander Schug et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries
Bernd-Arno Behrens et al.
1ST CIRP CONFERENCE ON COMPOSITE MATERIALS PARTS MANUFACTURING (CIRP CCMPM 2017) (2017)
Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites
In-Gyu Lee et al.
COMPOSITE STRUCTURES (2017)
Viscoelastic bending model for continuous fiber-reinforced thermoplastic composites in melt
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A new test method for the characterization of the bending behavior of textile prepregs
Hassan Alshahrani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
On the characterisation of transverse tensile properties of molten unidirectional thermoplastic composite tapes for thermoforming simulations
A. Margossian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites
Steffen Ropers et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Analysis of the thermomechanical shear behaviour of woven-reinforced thermoplastic-matrix composites during forming
Martin Machado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A rate-dependent non-orthogonal constitutive model for describing shear behaviour of woven reinforced thermoplastic composites
Martin Machado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
An anisotropic hyperelastic constitutive model for thermoplastic woven composite prepregs
Youkun Gong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization
E. Guzman-Maldonado et al.
MATERIALS & DESIGN (2016)
Stamp forming optimization for formability and crystallinity
T. G. Donderwinkel et al.
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) (2016)
Development and validation of a CAE chain for unidirectional fibre reinforced composite components
Luise Kaerger et al.
COMPOSITE STRUCTURES (2015)
Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites
E. Guzman-Maldonado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture
Lisa M. Dangora et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Challenges associated with shear characterization of a cross-ply thermoplastic lamina using picture frame tests
Lisa M. Dangora et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Bending characterisation of a molten unidirectional carbon fibre reinforced thermoplastic composite using a Dynamic Mechanical Analysis system
A. Margossian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate
Hugues Lessard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Experimental investigation of carbon fiber reinforced poly(phenylene sulfide) composites prepared using a double-belt press
Dong Liu et al.
COMPOSITES PART B-ENGINEERING (2015)
Thermo-Mechanical Behavior of Stretch-Broken Carbon Fiber and Thermoplastic Resin Composites During Manufacturing
Peng Wang et al.
POLYMER COMPOSITES (2015)
Bending of unidirectional non-crimp-fabrics: experimental characterization, constitutive modeling and application in finite element simulation
T. Senner et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2015)
Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Characterisation of the shear-tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes
Farbod Nosrat-Nezami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations
Biao Liang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability analyses of uni-directional and textile reinforced thermoplastics
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Analysis of process-induced deformations in thermoplastic composite materials
Christian Brauner et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test
Peng Wang et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)
Forming limits of thermoplastic composites
D. J. Wolthuizen et al.
MATERIAL FORMING ESAFORM 2014 (2014)
Experimental and computational composite textile reinforcement forming: A review
Thomas Gereke et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry
P. Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation
Xiongqi Peng et al.
COMPOSITES PART B-ENGINEERING (2013)
Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2013)
Tension locking in finite-element analyses of textile composite reinforcement deformation
Nahiene Hamila et al.
COMPTES RENDUS MECANIQUE (2013)
Characterization of the tool/fabric and fabric/fabric friction for woven-fabric composites during the thermostamping process
Konstantine A. Fetfatsidis et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2013)
Fitting-free hyperelastic strain energy formulation for triaxial weave fabric composites
A. B. H. Kueh
MECHANICS OF MATERIALS (2012)
Quantification of non-isothermal, multi-phase crystallization of isotactic polypropylene: The influence of cooling rate and pressure
M. van Drongelen et al.
POLYMER (2012)
Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes
Qianqian Chen et al.
COMPOSITE STRUCTURES (2011)
Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulation
Xiongqi Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Rate dependent modelling of the forming behaviour of viscous textile composites
Philip Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Hyperelastic modelling for mesoscopic analyses of composite reinforcements
A. Charmetant et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Textile composite double dome stamping simulation using a non-orthogonal constitutive model
Xiongqi Peng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
P. Boisse et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Finite element analysis of bias extension test using an orthotropic hyperelastic continuum model for woven fabric
Samia Dridi et al.
JOURNAL OF THE TEXTILE INSTITUTE (2011)
Digital Method of Analyzing the Bending Stiffness of Non-Crimp Fabrics
Dimitri Soteropoulos et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis
Y. Aimene et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark
M. A. Khan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming
Philippe Boisse et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming
David Jauffres et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
A SIMPLE ANISOTROPIC FIBER REINFORCED HYPERELASTIC CONSTITUTIVE MODEL FOR WOVEN COMPOSITE FABRICS
X. Q. Peng et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
A multi-layer triangular membrane finite element for the forming simulation of laminated composites
R. H. W. ten Thije et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Large deformation analysis of fibrous materials using rate constitutive equations
Pierre Badel et al.
COMPUTERS & STRUCTURES (2008)
Processing of fibre reinforced thermoplastic composites
U. K. Vaidya et al.
INTERNATIONAL MATERIALS REVIEWS (2008)
BENDING TEST OF COMPOSITE REINFORCEMENTS
E. de Bilbao et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Predictive modelling for optimization of textile composite forming
H. Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Residual stresses in thermoplastic composites- A study of the literature- Part II: Experimental techniques
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Residual stresses in thermoplastic composites - a study of the literature. Part III: Effects of thermal residual stresses
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
A friction model for thermostamping commingled glass-polypropylene woven fabrics
Jennifer L. Gorczyca-Cole et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Simulation of continuous fibre reinforced thermoplastic forming using a shell finite element with transverse stress
D Soulat et al.
COMPUTERS & STRUCTURES (2006)
Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics
D Trudel-Boucher et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Intraply shear characterisation of a fibre reinforced thermoplastic composite
WF Stanley et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Residual stresses in thermoplastic composites - A study of the literature - Part I: Formation of residual stresses
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics
XQ Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
The potential of high speed DSC (Hyper-DSC) for the detection and quantification of small amounts of amorphous content in predominantly crystalline samples
M Saunders et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Thermoforming-stamping of continuous glass fiber/polypropylene composites: Interlaminar and tool-laminate shear properties
G Lebrun et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2004)
Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments
P Harrison et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
A constituent-based predictive approach to modelling the rheology of viscous textile composites
P Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Sheet hydroforming of woven FRT composites: non-orthogonal constitutive equation considering shear stiffness and undulation of woven structure
WR Yu et al.
COMPOSITE STRUCTURES (2003)
An approach in modeling the temperature effect in thermo-stamping of woven composites
J Cao et al.
COMPOSITE STRUCTURES (2003)
A non-orthogonal constitutive model for characterizing woven composites
P Xue et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Material characterization of woven fabrics for thermoforming of composites
D Lussier et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2002)
Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites
WR Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Bias extension measurements on cross-plied unidirectional prepreg
K Potter
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Cooling rate influences in carbon fibre/PEEK composites. Part II: interlaminar fracture toughness
SL Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Cooling rate influences in carbon fibre/PEEK composites. Part III: impact damage performance
SL Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Commingled yam composites for rapid processing of complex shapes
N Bernet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Analyses of fabric tensile behaviour: determination of the biaxial tension-strain surfaces and their use in forming simulations
P Boisse et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Cohesive element modeling of viscoelastic fracture: application to peel testing of polymers
P Rahulkumar et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion
SL Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)