4.7 Article

Flexible decorative wood veneer with high strength, wearability and moisture penetrability enabled by infiltrating castor oil-based waterborne polyurethanes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Forestry

Hardness of chemically densified Yellow birch in relation to wood density, polymer content and polymer properties

Juliette Triquet et al.

Summary: This study aimed to evaluate the efficiency of different polymers for chemical densification of wood, by filling its porous structure with polymers to increase density and hardness. Results showed that polymer efficiency increased with increasing glass transition temperature of polyacrylates.

HOLZFORSCHUNG (2021)

Article Polymer Science

Warpage control method during surface forming process of plastic film-reinforced flexible decorative veneer

Xiaorui Peng et al.

Summary: A new method using concave and convex molds for hot pressing was proposed to effectively control warpage issues of PRPDSV and improve quality stability. Surface forming temperature and mold curvature radius are key factors that affect warpage of PRPDSV.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Materials Science, Multidisciplinary

Interfacial bonding properties of the eco-friendly geopolymer-wood composites: influences of embedded wood depth, wood surface roughness, and moisture conditions

Hanzhou Ye et al.

Summary: Increasing the embedded depth of wood, sanding the wood surface, and controlling moisture conditions during curing process can enhance the interfacial bonding strength of geopolymer-wood composites, with a plateau reached when the embedded depth exceeds 25 mm. Curing under wet conditions contributes to higher interfacial bonding strength, and improving wood surface roughness through sanding can create stronger mechanical interlocking at the interface to enhance bonding strength.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Engineering, Multidisciplinary

High-grip and hard-wearing graphene reinforced polyurethane coatings

Monica Alberto et al.

Summary: Adding few-layer graphene nanoparticles into PU resin films can significantly improve abrasion resistance, static and dynamic friction coefficients, while having minimal impact on other mechanical properties.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Multidisciplinary

Flexible and thin multifunctional waterborne polyurethane/Ag film for high-efficiency electromagnetic interference shielding, electro-thermal and strain sensing performances

Yunpeng Jia et al.

Summary: The study presents a simple and feasible method to fabricate conductive polymer composite films supported on Ag flakes and waterborne polyurethane by spraying. The films exhibit excellent flexibility and electromagnetic interference shielding effectiveness, remarkable electro-thermal effect, high durability, reproducibility, rapid response time to strain, and potential applications in human movement monitoring and wearable electronic devices.

COMPOSITES PART B-ENGINEERING (2021)

Article Physics, Applied

Prediction of adhesion between randomly rough surfaces by order statistics

Hong Hu et al.

Summary: The study derived a simple analytical formula based on classic order statistics to predict the interfacial binding energy between rough surfaces, highlighting the strong length scale dependence of adhesion. Comparison with experimental results showed that the formula holds its accuracy, particularly for the Derjaguin-Muller-Toporov adhesion case.

APPLIED PHYSICS LETTERS (2021)

Article Engineering, Multidisciplinary

Self-healing polyelectrolyte complex coating for flame retardant flexible polyurethane foam with enhanced mechanical property

Dan Meng et al.

Summary: A self-healing coating containing PEI/APP polyelectrolyte complex deposited on FPUF with GO was able to improve flame retardancy and mechanical properties. The coating reduced peak heat release rate significantly and exhibited self-healing ability, enhancing compressive strength by 175.0% compared to control.

COMPOSITES PART B-ENGINEERING (2021)

Article Forestry

Experimental analysis of the forming behavior of ash wood veneer with nonwoven backings

David Zerbst et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)

Article Engineering, Multidisciplinary

A crosslinkable graphene oxide in waterborne polyurethane anticorrosive coatings: Experiments and simulation

Jincan Cui et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Manufacturing

Mechanical properties of transparent high strength biocomposites from delignified wood veneer

Erik Jungstedt et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Multidisciplinary

Bio-treatment of poplar via amino acid for interface control in biocomposites

Xianhui Zhao et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Nanoscience & Nanotechnology

Transparent Wood Biocomposites by Fast UV-Curing for Reduced Light-Scattering through Wood/Thiol-ene Interface Design

Martin Hoglund et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Composites

Transparent wood with thermo-reversible optical properties based on phase-change material

Zhe Qiu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Humin based resin for wood modification and property improvement

Anna Sangregorio et al.

GREEN CHEMISTRY (2020)

Article Materials Science, Multidisciplinary

Critical Role of Degree of Polymerization of Cellulose in Super-Strong Nanocellulose Films

Zhiqiang Fang et al.

MATTER (2020)

Article Materials Science, Composites

Flexible transparent wood prepared from poplar veneer and polyvinyl alcohol

Anantha N. Subba Rao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Forestry

Surface properties of different natural precious decorative veneers by plasma modification

Xiaorui Peng et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)

Article Chemistry, Multidisciplinary

Design and Synthesis of Waterborne Polyurethanes

Soo-Young Kang et al.

ADVANCED MATERIALS (2018)

Article Materials Science, Composites

Hot-pressing composite curling deformation characteristics of plastic film-reinforced pliable decorative sliced veneer

Xiaorui Peng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Forestry

Moisture transport and sorption in beech and spruce barks

Romain Remond et al.

HOLZFORSCHUNG (2018)

Article Agricultural Engineering

Aqueous anionic polyurethane dispersions from castor oil

Haiyan Liang et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Article Chemistry, Multidisciplinary

Improvement of the Performance of Plantation Wood by Grafting Water-Soluble Vinyl Monomers onto Cell Walls

Hongbo Qiu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Chemistry, Physical

Fabrication of oleophobic paper with tunable hydrophilicity by treatment with non-fluorinated chemicals

Zhenguan Tang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Variability in surface polarity of wood by means of AFM adhesion force mapping

Stephan Frybort et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)

Article Materials Science, Composites

Characterization of UHMWPE/wood composites produced via dry-blending and compression molding

A. Mahfoudh et al.

POLYMER COMPOSITES (2013)

Article Chemistry, Analytical

The Estimation of Acidic Behavior of Wood by Treatment with Aqueous Na2HPO4 Solution

Gunes Ucar et al.

JOURNAL OF ANALYTICAL METHODS IN CHEMISTRY (2012)

Review Plant Sciences

Wood cell walls: biosynthesis, developmental dynamics and their implications for wood properties

Ewa J. Mellerowicz et al.

CURRENT OPINION IN PLANT BIOLOGY (2008)

Article Chemistry, Physical

Adhesion between an elastic body and a randomly rough hard surface

BNJ Persson

EUROPEAN PHYSICAL JOURNAL E (2002)