相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties
S. M. Fijul Kabir et al.
COMPOSITE STRUCTURES (2020)
High-pressure interfacial impregnation by micro-screw in-situ extrusion for 3D printed continuous carbon fiber reinforced nylon composites
Tengfei Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures
Nanya Li et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber
Kentaro Sugiyama et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Self-heating 3D printed continuous carbon fiber/epoxy mesh and its application in wind turbine deicing
Yueke Ming et al.
POLYMER TESTING (2020)
Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading
Haoqi Zhang et al.
COMPOSITES PART B-ENGINEERING (2020)
3d printed continuous fiber reinforced composite auxetic honeycomb structures
Chao Quan et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
Qinghao He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Recent Progress on Polymer Materials for Additive Manufacturing
Lisa Jiaying Tan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
Cagri Oztan et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing
Andrew N. Dickson et al.
COMPOSITE STRUCTURES (2019)
Design considerations and modeling of fiber reinforced 3D printed parts
Nekoda van de Werken et al.
COMPOSITES PART B-ENGINEERING (2019)
Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests
Lincy Pyl et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Mechanical characterization and asymptotic homogenization of 3D-printed continuous carbon fiber-reinforced thermoplastic
Thiago Assis Dutra et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Low-pressure additive manufacturing of continuous fiber-reinforced polymer composites
Heather J. O'Connor et al.
POLYMER COMPOSITES (2019)
Impregnation and interlayer bonding behaviours of 3D-printed continuous carbon-fiber-reinforced poly-ether-ether-ketone composites
Luo Meng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
Wenli Ye et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Composite 3D printing for the small size unmanned aerial vehicle structure
Andrey V. Azarov et al.
COMPOSITES PART B-ENGINEERING (2019)
Additive manufacturing of polymer composites: Processing and modeling approaches
A. El Moumen et al.
COMPOSITES PART B-ENGINEERING (2019)
Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites
Tianyu Yu et al.
COMPOSITE STRUCTURES (2019)
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2019)
3D printed fiber reinforced polymer composites - Structural analysis
M. Mohammadizadeh et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical and self-monitoring behaviors of 3D printing smart continuous carbon fiber-thermoplastic lattice truss sandwich structure
Zhenwei Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Bending fracture rule for 3D-printed curved continuous-fiber composite
Kouki Ishii et al.
ADVANCED COMPOSITE MATERIALS (2019)
3D printing of continuous flax fibre reinforced biocomposites for structural applications
A. Le Duigou et al.
MATERIALS & DESIGN (2019)
Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication
Yong Peng et al.
COMPOSITE STRUCTURES (2019)
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Behnam Akhoundi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites
Hui Mei et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Manufacturing and 3D printing of continuous carbon fiber prepreg filament
Qingxi Hu et al.
JOURNAL OF MATERIALS SCIENCE (2018)
An evaluation of three different techniques for melt impregnation of glass fiber bundles with polyamide 12
Willem Van de Steene et al.
POLYMER ENGINEERING AND SCIENCE (2018)
3D printed continuous fibre reinforced composite corrugated structure
Zhanghao Hou et al.
COMPOSITE STRUCTURES (2018)
Characterization of 3D printed long fibre reinforced composites
J. Justo et al.
COMPOSITE STRUCTURES (2018)
Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study
Haoqi Zhang et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
A. A. Stepashkin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods
Kuldeep Agarwal et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
M. A. Caminero et al.
POLYMER TESTING (2018)
Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
Wenfeng Hao et al.
POLYMER TESTING (2018)
A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures
Shuting Liu et al.
MATERIALS & DESIGN (2018)
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
G. D. Goh et al.
MATERIALS & DESIGN (2018)
Additive manufacturing of woven carbon fibre polymer composites
Andrew N. Dickson et al.
COMPOSITE STRUCTURES (2018)
3D printing of composite sandwich structures using continuous carbon fiber and fiber tension
Kentaro Sugiyama et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites
Tengfei Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Creep behavior analysis of additively manufactured fiber-reinforced components
M. Mohammadizadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
Lincy Pyl et al.
POLYMER TESTING (2018)
Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding
Masao Yamawaki et al.
ADVANCED COMPOSITE MATERIALS (2018)
A Novel Approach: Combination of Automated Fiber Placement (AFP) and Additive Layer Manufacturing (ALM)
Mohammad Rakhshbahar et al.
JOURNAL OF COMPOSITES SCIENCE (2018)
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
Fuda Ning et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
Paolo Bettini et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Industrial and Consumer Uses of Additive Manufacturing A Discussion of Capabilities, Trajectories, and Challenges
Haden Edward Quinlan et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies
Thomas Hofstatter et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Chuncheng Yang et al.
RAPID PROTOTYPING JOURNAL (2017)
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
Pedram Parandoush et al.
MATERIALS & DESIGN (2017)
Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring
Xinhua Yao et al.
MATERIALS & DESIGN (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Design of composite structures reinforced curvilinear fibres using FEM
A. V. Malakhov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials
Sean A. Hinchcliffe et al.
COMPOSITES PART B-ENGINEERING (2016)
Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds
F. S. Senatov et al.
COMPOSITES PART B-ENGINEERING (2016)
Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite
Zhenzhen Quan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Nanya Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
3D-printable CFR polymer composites with dual-cure sequential IPNs
Gianmarco Griffini et al.
POLYMER (2016)
3D printed components with ultrasonically arranged microscale structure
Thomas M. Llewellyn-Jones et al.
SMART MATERIALS AND STRUCTURES (2016)
Recent developments in 3D printable composite materials
Umme Kalsoom et al.
RSC ADVANCES (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Investigation of out of plane compressive strength of 3D printed sandwich composites
V. Dikshit et al.
37TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Design for Fiber-Reinforced Additive Manufacturing
Hauke Pruess et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Rapid Prototyping Amphiphilic Polymer/Hydroxyapatite Composite Scaffolds with Hydration-Induced Self-Fixation Behavior
Artem B. Kutikov et al.
TISSUE ENGINEERING PART C-METHODS (2015)
Computational structural tailoring of continuous fibre reinforced polymer matrix composites by hybridisation of principal stress and thickness optimisation
Thomas Rettenwander et al.
COMPOSITE STRUCTURES (2014)
Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites
Byung Chul Kim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Construction of Trajectories of the Fibers Which Bypass a Hole and Their Comparison with the Structure of Wood in the Vicinity of a Knot
A. V. Malakhov et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2013)
Continuous tow shearing for manufacturing variable angle tow composites
Byung Chul Kim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
Tailoring for strength of composite steered-fibre panels with cutouts
C. S. Lopes et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Composites by rapid prototyping technology
S. Kumar et al.
MATERIALS & DESIGN (2010)
Design of variable-stiffness composite panels for maximum buckling load
Shahriar Setoodeh et al.
COMPOSITE STRUCTURES (2009)
Improvement of bearing strength of laminated composites
A. Crosky et al.
COMPOSITE STRUCTURES (2006)
Design of variable-stiffness composite layers using cellular automata
S Setoodeh et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)
Design of variable-stiffness laminates using lamination parameters
S Setoodeh et al.
COMPOSITES PART B-ENGINEERING (2006)
Improving the efficiency of fiber steered composite joints using load path trajectories
R. Li et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping
DE Karalekas
MATERIALS & DESIGN (2003)
Strength improvement by fibre steering around a pin loaded hole
R Li et al.
COMPOSITE STRUCTURES (2002)
Monomer transfer moulding and rapid prototyping methods for fibre reinforced thermoplastics for medical applications
P Christian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Load paths and load flow in finite element analysis
DW Kelly et al.
ENGINEERING COMPUTATIONS (2001)
Interpreting load paths and stress trajectories in elasticity
DW Kelly et al.
ENGINEERING COMPUTATIONS (2000)
On the design, manufacture and testing of trajectorial fibre steering for carbon fibre composite laminates
MW Tosh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
分享论文
