相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3D printing of graphene oxide composites with well controlled alignment
Yue Qian et al.
CARBON (2021)
Thermoelectric Converters Based on Ionic Conductors
Xun Wu et al.
CHEMISTRY-AN ASIAN JOURNAL (2021)
Amphiphilicity-adaptable graphene quantum dots to stabilize pH-responsive pickering emulsions at a very low concentration
Rong Ma et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
Shape-Versatile 3D Thermoelectric Generators by Additive Manufacturing
Md Mofasser Mallick et al.
ACS ENERGY LETTERS (2021)
High-Power All-Carbon Fully Printed and Wearable SWCNT-Based Organic Thermoelectric Generator
Christos K. Mytafides et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Ionic thermoelectric materials and devices
Dan Zhao et al.
Journal of Energy Chemistry (2021)
Hybrid printing of wearable piezoelectric sensors
Yipu Du et al.
NANO ENERGY (2021)
Atmospheric Pressure and Ambient Temperature Plasma Jet Sintering of Aerosol Jet Printed Silver Nanoparticles
Nazli Turan et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Quantifying charge carrier localization in chemically doped semiconducting polymers
Shawn A. Gregory et al.
NATURE MATERIALS (2021)
Review on advances in thermoelectric conversion using ion-conducting polymers
Bowen Lei et al.
MATERIALS RESEARCH EXPRESS (2021)
Direct ink writing of three-dimensional thermoelectric microarchitectures
Fredrick Kim et al.
NATURE ELECTRONICS (2021)
Scalable nanomanufacturing of chalcogenide inks: a case study on thermoelectric V-VI nanoplates
Minxiang Zeng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Templating synthesis of natural cotton-based hierarchically structured carbon hollow microfibers for high-performance solar vapor generation
Shijun Lei et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
All-Printed MXene-Graphene Nanosheet-Based Bimodal Sensors for Simultaneous Strain and Temperature Sensing
Mortaza Saeidi-Javash et al.
ACS APPLIED ELECTRONIC MATERIALS (2021)
Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring
Minxiang Zeng et al.
MATERIALS HORIZONS (2021)
Thermal Transport in Conductive Polymer-Based Materials
Xiangfan Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering
Tony Varghese et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
2D Materials for Large-Area Flexible Thermoelectric Devices
Kaito Kanahashi et al.
ADVANCED ENERGY MATERIALS (2020)
Compositionally Graded Organic-Inorganic Nanocomposites for Enhanced Thermoelectric Performance
Canlin Ou et al.
ADVANCED ELECTRONIC MATERIALS (2020)
Self-Powered Temperature Sensor with Seebeck Effect Transduction for Photothermal-Thermoelectric Coupled Immunoassay
Lingting Huang et al.
ANALYTICAL CHEMISTRY (2020)
Application of thermoelectric cooler in temperature control system of space science experiment
Dongcai Guo et al.
APPLIED THERMAL ENGINEERING (2020)
A comprehensive review of Thermoelectric Generators: Technologies and common applications
Nesrine Jaziri et al.
ENERGY REPORTS (2020)
Supramolecular Energy Materials
Oliver Dumele et al.
ADVANCED MATERIALS (2020)
Plasmas for additive manufacturing
Sui Yongkun et al.
PLASMA PROCESSES AND POLYMERS (2020)
Giant thermopower of ionic gelatin near room temperature
Cheng-Gong Han et al.
SCIENCE (2020)
A general method to synthesize and sinter bulk ceramics in seconds
Chengwei Wang et al.
SCIENCE (2020)
3D printing of conducting polymers
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS (2020)
Two-Dimensional Thermal Haptic Module Based on a Flexible Thermoelectric Device
Seongho Kim et al.
SOFT ROBOTICS (2020)
Stretchable Nanolayered Thermoelectric Energy Harvester on Complex and Dynamic Surfaces
Yang Yang et al.
NANO LETTERS (2020)
Thermoelectric Generators: Alternative Power Supply for Wearable Electrocardiographic Systems
Matthew Dargusch et al.
ADVANCED SCIENCE (2020)
Large-Area, Wearable, Self-Powered Pressure-Temperature Sensor Based on 3D Thermoelectric Spacer Fabric
Mufang Li et al.
ACS SENSORS (2020)
Colloidal Nanosurfactants for 3D Conformal Printing of 2D van der Waals Materials
Minxiang Zeng et al.
ADVANCED MATERIALS (2020)
Recent Progress in Organic Thermoelectric Materials and Devices
Soonyong Lee et al.
MACROMOLECULAR RESEARCH (2020)
The Role of Polyethylene Wax on the Thermal Conductivity of Transparent Ultradrawn Polyethylene Films
Xinglong Pan et al.
MACROMOLECULES (2020)
Printable and Stretchable Temperature-Strain Dual-Sensing Nanocomposite with High Sensitivity and Perfect Stimulus Discriminability
Fengchao Li et al.
NANO LETTERS (2020)
Wearable multi-sensing double-chain thermoelectric generator
Dan-Liang Wen et al.
MICROSYSTEMS & NANOENGINEERING (2020)
High-Performance Flexible Bismuth Telluride Thin Film from Solution Processed Colloidal Nanoplates
Courtney Hollar et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
A polymer-based textile thermoelectric generator for wearable energy harvesting
Anja Lund et al.
JOURNAL OF POWER SOURCES (2020)
High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronics
Byeongmoon Lee et al.
NATURE COMMUNICATIONS (2020)
Scalable thermoelectric fibers for multifunctional textile-electronics
Tianpeng Ding et al.
NATURE COMMUNICATIONS (2020)
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nagaraj Nandihalli et al.
NANO ENERGY (2020)
Highly conductive, ultra-flexible and continuously processable PEDOT:PSS fibers with high thermoelectric properties for wearable energy harvesting
Ningxuan Wen et al.
NANO ENERGY (2020)
Using iron sulphate to form both n-type and p-typepseudo-thermoelectrics: non-hazardous and 'second life' thermogalvanic cells
Mark A. Buckingham et al.
GREEN CHEMISTRY (2020)
Shear thinning and thickening in dispersions of spherical nanoparticles
E. Kucuksonmez et al.
PHYSICAL REVIEW E (2020)
Recent advances in printable thermoelectric devices: materials, printing techniques, and applications
Md Sharafat Hossain et al.
RSC ADVANCES (2020)
Non-Wiedemann-Franz behavior of the thermal conductivity of organic semiconductors
Dorothea Scheunemann et al.
PHYSICAL REVIEW B (2020)
Improving the performance of a screen-printed micro-radioisotope thermoelectric generator through stacking integration
Zicheng Yuan et al.
JOURNAL OF POWER SOURCES (2019)
Improving the stability of high expansion foam used for LNG vapor risk mitigation using exfoliated zirconium phosphate nanoplates
Pratik Krishnan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Progress and Perspective: Soft Thermoelectric Materials for Wearable and Internet-of-Things Applications
Edmond W. Zaia et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Improvement of Temperature Control Performance of Thermoelectric Dehumidifier Used Industry 4.0 by the SF-PI Controller
Jae-Sub Ko et al.
PROCESSES (2019)
Flexible thermoelectric device based on TiS2(HA)x n-type nanocomposite printed on paper
Salim Ferhat et al.
ORGANIC ELECTRONICS (2019)
Wearable thermoelectrics for personalized thermoregulation
Sahngki Hong et al.
SCIENCE ADVANCES (2019)
A New Class of Low-Temperature Plasma-Activated, Inorganic Salt-Based Particle-Free Inks for Inkjet Printing Metals
Yongkun Sui et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D Conformal Printing and Photonic Sintering of High-Performance Flexible Thermoelectric Films Using 2D Nanoplates
Mortaza Saeidi-Javash et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Yuan Wang et al.
ADVANCED MATERIALS (2019)
3D Printed SnSe Thermoelectric Generators with High Figure of Merit
Matthew R. Burton et al.
ADVANCED ENERGY MATERIALS (2019)
Liquid Metal Supercooling for Low-Temperature Thermoelectric Wearables
Mohammad H. Malakooti et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Fully Printed Organic Electrochemical Transistors from Green Solvents
Brian Schmatz et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Iridescence in nematics: Photonic liquid crystals of nanoplates in absence of long-range periodicity
Minxiang Zeng et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Flexible, High-Power Density, Wearable Thermoelectric Nanogenerator and Self-Powered Temperature Sensor
Rui Feng et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Growth of Colloidal Nanoplate Liquid Crystals Using Temperature Gradients
Abhijeet Shinde et al.
ACS NANO (2019)
A figure of merit for flexibility
Jun Peng et al.
SCIENCE (2019)
Ultrafast Fabrication of Thermoelectric Films by Pulsed Light Sintering of Colloidal Nanoparticles on Flexible and Rigid Substrates
Roozbeh Danaei et al.
ADVANCED ENGINEERING MATERIALS (2019)
3D Printing of Solution-Processable 2D Nanoplates and 1D Nanorods for Flexible Thermoelectrics with Ultrahigh Power Factor at Low-Medium Temperatures
Chaochao Dun et al.
ADVANCED SCIENCE (2019)
Performance enhance of CMOS-MEMS thermoelectric infrared sensor by using sensing material and structure design
Ting-Wei Shen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Natural Halloysites-Based Janus Platelet Surfactants for the Formation of Pickering Emulsion and Enhanced Oil Recovery
Lecheng Zhang et al.
SCIENTIFIC REPORTS (2019)
Silver Telluride Nanowire Assembly for High-Performance Flexible Thermoelectric Film and Its Application in Self-Powered Temperature Sensor
Xiaoliang Zeng et al.
ADVANCED ELECTRONIC MATERIALS (2019)
3D extruded composite thermoelectric threads for flexible energy harvesting
J. Peng et al.
NATURE COMMUNICATIONS (2019)
Flexible thermopower generation over broad temperature range by PANI/ nanorod hybrid- based p- n couples
Yao Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Design and Fabrication of a 3-D Printed Concentrating Solar Thermoelectric Generator for Energy Harvesting Based Wireless Sensor Nodes
Johan J. Estrada-Lopez et al.
IEEE SENSORS LETTERS (2019)
A Percolation Model for Piezoresistivity in Conductor-Polymer Composites
Mingyi Wang et al.
ADVANCED THEORY AND SIMULATIONS (2019)
3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance
Junhao Qiu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Uniform, Scalable, High-Temperature Microwave Shock for Nanoparticle Synthesis through Defect Engineering
Shaomao Xu et al.
MATTER (2019)
Flexible thermoelectric generators with inkjet-printed bismuth telluride nanowires and liquid metal contacts
Bolin Chen et al.
NANOSCALE (2019)
Colloidal nanoparticle inks for printing functional devices: emerging trends and future prospects
Minxiang Zeng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Assembly and applications of 3D conformal electronics on curvilinear surfaces
YongAn Huang et al.
MATERIALS HORIZONS (2019)
Roll-to-roll printing of spatial wearable thermoelectrics
Zimeng Zhang et al.
MANUFACTURING LETTERS (2019)
3D printed electrochemical energy storage devices
Peng Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
An experimental study of the influence of orientation on water condensation of a thermoelectric cooling heatsink
Carson T. Hand et al.
HELIYON (2019)
High Performance Thermoelectric Materials: Progress and Their Applications
Lei Yang et al.
ADVANCED ENERGY MATERIALS (2018)
Fully Printed Organic-Inorganic Nanocomposites for Flexible Thermoelectric Applications
Canlin Ou et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Hierarchical, Self-Healing and Superhydrophobic Zirconium Phosphate Hybrid Membrane Based on the Interfacial Crystal Growth of Lyotropic Two-Dimensional Nanoplatelets
Minxiang Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Inkjet Printed Large-Area Flexible Few-Layer Graphene Thermoelectrics
Taneli Juntunen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Electrostatic-Driven Dynamic Jamming of 2D Nanoparticles at Interfaces for Controlled Molecular Diffusion
Jianhui Luo et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Screen-printed radial structure micro radioisotope thermoelectric generator
Zicheng Yuan et al.
APPLIED ENERGY (2018)
Bidirectional operation of the thermoelectric device for active temperature control of fuel cells
Trevor Hocksun Kwan et al.
APPLIED ENERGY (2018)
Conductive Polymers: Opportunities and Challenges in Biomedical Applications
Toktam Nezakati et al.
CHEMICAL REVIEWS (2018)
Performance of Functionally Graded Thermoelectric Materials and Devices: A Review
Corson L. Cramer et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Correlating the Seebeck coefficient of thermoelectric polymer thin films to their charge transport mechanism
Ioannis Petsagkourakis et al.
ORGANIC ELECTRONICS (2018)
Conductive polymers for thermoelectric power generation
Meetu Bharti et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Inkjet printing metals on flexible materials for plastic and paper electronics
N. C. Raut et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Polymer films with ultrahigh thermoelectric properties arising from significant seebeck coefficient enhancement by ion accumulation on surface
Zeng Fan et al.
NANO ENERGY (2018)
High-Performance PbTe Thermoelectric Films by Scalable and Low-Cost Printing
Chao Han et al.
ACS ENERGY LETTERS (2018)
Thermoelectric Advances to Capture Waste Heat in Automobiles
Yanliang Zhang
ACS ENERGY LETTERS (2018)
3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks
Fredrick Kim et al.
NATURE ENERGY (2018)
Organic thermoelectric devices based on a stable n-type nanocomposite printed on paper
Salim Ferhat et al.
SUSTAINABLE ENERGY & FUELS (2018)
Large-Scale, Solution-Synthesized Nanostructured Composites for Thermoelectric Applications
Biao Xu et al.
ADVANCED MATERIALS (2018)
High-performance self-powered wireless sensor node driven by a flexible thermoelectric generator
Yong Jun Kim et al.
ENERGY (2018)
Thermal analysis and optimization of a system for water harvesting from humid air using thermoelectric coolers
M. Eslami et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
High-performance thermoelectric bracelet based on carbon nanotube ink printed directly onto a flexible cable
Kyung Tae Park et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Enhanced thermoelectric properties of flexible aerosol-jet printed carbon nanotube-based nanocomposites
Canlin Ou et al.
APL MATERIALS (2018)
Aqueous thermogalvanic cells with a high Seebeck coefficient for low-grade heat harvest
Jiangjiang Duan et al.
NATURE COMMUNICATIONS (2018)
Novel thermocouples for automotive applications
Paul Gierth et al.
JOURNAL OF SENSORS AND SENSOR SYSTEMS (2018)
Solution processed intrinsically conductive polymer films with high thermoelectric properties and good air stability
Hongyan Yao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Soft Elastomers with Ionic Liquid-Filled Cavities as Strain Isolating Substrates for Wearable Electronics
Yinji Ma et al.
SMALL (2017)
Inorganic and Organic Solution-Processed Thin Film Devices
Morteza Eslamian
NANO-MICRO LETTERS (2017)
Inorganic and Organic Solution-Processed Thin Film Devices
Morteza Eslamian
NANO-MICRO LETTERS (2017)
Human body heat for powering wearable devices: From thermal energy to application
Moritz Thielen et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Collapse of liquid-overfilled strain-isolation substrates in wearable electronics
Xiufeng Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Controlled multiple neutral planes by low elastic modulus adhesive for flexible organic photovoltaics
Wansun Kim et al.
NANOTECHNOLOGY (2017)
Inflammation-free, gas-permeable, lightweight, stretchable on-skin electronics with nanomeshes
Akihito Miyamoto et al.
NATURE NANOTECHNOLOGY (2017)
A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges
Abu Raihan Mohammad Siddique et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Flexible thermoelectric nanogenerator based on the MoS2/graphene nanocomposite and its application for a self-powered temperature sensor
Yannan Xie et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2017)
A stacked and miniaturized radioisotope thermoelectric generator by screen printing
Zicheng Yuan et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems
K. P. Sibin et al.
SOLAR ENERGY (2017)
Cooling methodologies of photovoltaic module for enhancing electrical efficiency: A review
A. Shukla et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
In situ click chemistry generation of cyclooxygenase-2 inhibitors
Atul Bhardwaj et al.
NATURE COMMUNICATIONS (2017)
Electrical and Electrochemical Properties of Conducting Polymers
Thanh-Hai Le et al.
POLYMERS (2017)
Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-PEDOT:PSS nanocomposite
Eun Jin Bae et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Wearable solar thermoelectric generator driven by unprecedentedly high temperature difference
Yeon Soo Jung et al.
NANO ENERGY (2017)
n-type Bi-doped PbTe Nanocubes with Enhanced Thermoelectric Performance
Lei Yang et al.
NANO ENERGY (2017)
Post ionized defect engineering of the screen-printed Bi2Te2.7Se0.3 thick film for high performance flexible thermoelectric generator
Sun Jin Kim et al.
NANO ENERGY (2017)
Paper-based origami flexible and foldable thermoelectric nanogenerator
Jhonathan P. Rojas et al.
NANO ENERGY (2017)
Completely Printed, Flexible, Stable, and Hysteresis-Free Carbon Nanotube Thin-Film Transistors via Aerosol Jet Printing
Changyong Cao et al.
ADVANCED ELECTRONIC MATERIALS (2017)
2D Insulator-Metal Transition in Aerosol-Jet-Printed Electrolyte-Gated Indium Oxide Thin Film Transistors
Wei Xie et al.
ADVANCED ELECTRONIC MATERIALS (2017)
Aqueous Exfoliation of Graphite into Graphene Assisted by Sulfonyl Graphene Quantum Dots for Photonic Crystal Applications
Minxiang Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Printed, metallic thermoelectric generators integrated with pipe insulation for powering wireless sensors
Brian Iezzi et al.
APPLIED ENERGY (2017)
Thermoelectric Polymer Aerogels for Pressure-Temperature Sensing Applications
Shaobo Han et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring
Yuhao Liu et al.
ACS NANO (2017)
Conformal Electronics Wrapped Around Daily Life Objects Using an Original Method: Water Transfer Printing
Brice Le Borgne et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders
Ethan B. Secor et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Bottom-up engineering of thermoelectric nanomaterials and devices from solution-processed nanoparticle building blocks
Silvia Ortega et al.
CHEMICAL SOCIETY REVIEWS (2017)
2D Chalcogenide Nanoplate Assemblies for Thermoelectric Applications
Chaochao Dun et al.
ADVANCED MATERIALS (2017)
Thermosensitive ZrP-PNIPAM Pickering Emulsifier and the Controlled-Release Behavior
Xuezhen Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
An approach to design a 90Sr radioisotope thermoelectric generator using analytical and Monte Carlo methods with. ANSYS, COMSOL, and MCNP
Abolhasan Khajepour et al.
APPLIED RADIATION AND ISOTOPES (2017)
Thermoelectric Devices for Power Generation: Recent Progress and Future Challenges
Qi Hao Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Conductive Screen Printing Inks by Gelation of Graphene Dispersions
Kirill Arapov et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Jung Hyun Kim et al.
ACS NANO (2016)
High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process
Sun Jin Kim et al.
ACS NANO (2016)
Chemically Exfoliated SnSe Nanosheets and Their SnSe/Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Composite Films for Polymer Based Thermoelectric Applications
Hyun Ju et al.
ACS NANO (2016)
n-Type Bi2Te3-xSex Nanoplates with Enhanced Thermoelectric Efficiency Driven by Wide-Frequency Phonon Scatterings and Synergistic Carrier Scatterings
Min Hong et al.
ACS NANO (2016)
Thermoelectric Polymers and their Elastic Aerogels
Zia Ullah Khan et al.
ADVANCED MATERIALS (2016)
2D-Crystal-Based Functional Inks
Francesco Bonaccorso et al.
ADVANCED MATERIALS (2016)
Enhancement of maximum temperature drop across thermoelectric cooler through two-stage design and transient supercooling effect
Hao Lv et al.
APPLIED ENERGY (2016)
Design, fabrication and feasibility analysis of a thermo-electric wearable helmet
Song Lv et al.
APPLIED THERMAL ENGINEERING (2016)
Conductive-on-demand: Tailorable polyimide/carbon nanotube nanocomposite thin film by dual-material aerosol jet printing
Kan Wang et al.
CARBON (2016)
Chemically exfoliated transition metal dichalcogenide nanosheet-based wearable thermoelectric generators
Jin Young Oh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Designing thermoelectric generators for self-powered wearable electronics
Francisco Suarez et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Power output and efficiency of a thermoelectric generator under temperature control
Wei-Hsin Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Size-controlled starch nanoparticles prepared by self-assembly with different green surfactant: The effect of electrostatic repulsion or steric hindrance
Xiaojing Li et al.
FOOD CHEMISTRY (2016)
Design of a Calibrated Temperature Difference Sensor Transducer for Monitoring Environmental Temperature Difference Applications
Cheng-Ta Chiang et al.
IEEE SENSORS JOURNAL (2016)
Screen Printable Flexible BiTe-SbTe-Based Composite Thermoelectric Materials on Textiles for Wearable Applications
Zhuo Cao et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2016)
Understanding electrical-thermal transport characteristics of organic semiconductors: Violation of Wiedemann-Franz law
Nianduan Lu et al.
JOURNAL OF APPLIED PHYSICS (2016)
Microwave-assisted rapid synthesis of hexagonal α-zirconium phosphate nanodisks as a Pickering emulsion stabilizer
Yi-Hsien Yu et al.
MATERIALS LETTERS (2016)
The surface science of nanocrystals
Michael A. Boles et al.
NATURE MATERIALS (2016)
Laser-assisted direct ink writing of planar and 3D metal architectures
Mark A. Skylar-Scott et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Splitting of the neutral mechanical plane depends on the length of the multi-layer structure of flexible electronics
Shuang Li et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)
High-performance shape-engineerable thermoelectric painting
Sung Hoon Park et al.
NATURE COMMUNICATIONS (2016)
Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns
Andreas Albrecht et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Stretchable helical architecture inorganic-organic hetero thermoelectric generator
Jhonathan P. Rojas et al.
NANO ENERGY (2016)
Organic thermoelectric materials for energy harvesting and temperature control
Boris Russ et al.
NATURE REVIEWS MATERIALS (2016)
Enhancement of Thermoelectric Properties of PEDOT:PSS and Tellurium-PEDOT:PSS Hybrid Composites by Simple Chemical Treatment
Eun Jin Bae et al.
SCIENTIFIC REPORTS (2016)
High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals
Tony Varghese et al.
SCIENTIFIC REPORTS (2016)
MEMS-based platinum-platinum rhodium film temperature sensor on alumina substrate
Jiubin Zhang et al.
JOURNAL OF ENGINEERING-JOE (2016)
Simultaneously Improving Electrical Conductivity and Thermopower of Polyaniline Composites by Utilizing Carbon Nanotubes as High Mobility Conduits
Hong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Soft Core/Shell Packages for Stretchable Electronics
Chi Hwan Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Printed flexible thermoelectric generators for use on low levels of waste heat
Deepa Madan et al.
APPLIED ENERGY (2015)
Splitting of neutral mechanical plane of conformal, multilayer piezoelectric mechanical energy harvester
Yewang Su et al.
APPLIED PHYSICS LETTERS (2015)
Wireless Optofluidic Systems for Programmable In Vivo Pharmacology and Optogenetics
Jae-Woong Jeong et al.
CELL (2015)
Nanostructured conductive polymers for advanced energy storage
Ye Shi et al.
CHEMICAL SOCIETY REVIEWS (2015)
Nanoparticle colloidal stability in cell culture media and impact on cellular interactions
Thomas L. Moore et al.
CHEMICAL SOCIETY REVIEWS (2015)
High-temperature and high-power-density nanostructured thermoelectric generator for automotive waste heat recovery
Yanliang Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Hierarchical Bi-Te based flexible thin-film solar thermoelectric generator with light sensing feature
Wei Zhu et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
An Analytic Model for Skin Modulus Measurement Via Conformal Piezoelectric Systems
Y. Shi et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2015)
Codoping in SnTe: Enhancement of Thermoelectric Performance through Synergy of Resonance Levels and Band Convergence
Gangjian Tan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Spray coating methods for polymer solar cells fabrication: A review
F. Aziz et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)
Dopant-Enabled Supramolecular Approach for Controlled Synthesis of Nanostructured Conductive Polymer Hydrogels
Yaqun Wang et al.
NANO LETTERS (2015)
Fatigue-free, superstretchable, transparent, and biocompatible metal electrodes
Chuan Fei Guo et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Composition-matched molecular solders for semiconductors
Dmitriy S. Dolzhnikov et al.
SCIENCE (2015)
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Sang Il Kim et al.
SCIENCE (2015)
Inorganic Surface Ligands for Colloidal Nanomaterials
Angshuman Nag et al.
ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2015)
Spray-printed CNT/P3HT organic thermoelectric films and power generators
Cheon Taek Hong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
PANI/graphene nanocomposite films with high thermoelectric properties by enhanced molecular ordering
Liming Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Flexible thermoelectric materials and device optimization for wearable energy harvesting
Je-Hyeong Bahk et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Epidermal Electronics with Advanced Capabilities in Near-Field Communication
Jeonghyun Kim et al.
SMALL (2015)
Gravure Printing of Graphene for Large-Area Flexible Electronics
Ethan B. Secor et al.
ADVANCED MATERIALS (2014)
Organic Thermoelectric Materials: Emerging Green Energy Materials Converting Heat to Electricity Directly and Efficiently
Qian Zhang et al.
ADVANCED MATERIALS (2014)
Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3
Deepa Madan et al.
APPLIED PHYSICS LETTERS (2014)
Design and optimization of beta-cell temperature sensor based on 63Ni-Si
Gholam Reza Ghasemi Nejad et al.
APPLIED RADIATION AND ISOTOPES (2014)
Graphene via sonication assisted liquid-phase exfoliation
Artur Ciesielski et al.
CHEMICAL SOCIETY REVIEWS (2014)
Hybrid composite of screen-printed inorganic thermoelectric film and organic conducting polymer for flexible thermoelectric power generator
Ju Hyung We et al.
ENERGY (2014)
A wearable thermoelectric generator fabricated on a glass fabric
Sun Jin Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Response to Comment on 'Effective thermal conductivity in thermoelectric materials' [J. Appl. Phys. 113, 204904 (2013)]
Lauryn L. Baranowski et al.
JOURNAL OF APPLIED PHYSICS (2014)
Roll-to-Roll Gravure with Nanomaterials for Printing Smart Packaging
Minhun Jung et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)
Environmentally Benign Synthesis of Ultrathin Metal Telluride Nanowires
Haoran Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Composition Modulation of Ag2Te Nanowires for Tunable Electrical and Thermal Properties
Haoran Yang et al.
NANO LETTERS (2014)
3D Printed Quantum Dot Light-Emitting Diodes
Yong Lin Kong et al.
NANO LETTERS (2014)
Monodisperse Antimony Nanocrystals for High-Rate Li-ion and Na-ion Battery Anodes: Nano versus Bulk
Meng He et al.
NANO LETTERS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Inkjet-printed flexible organic thin-film thermoelectric devices based on p- and n-type poly(metal 1,1,2,2-ethenetetrathiolate)s/polymer composites through ball-milling
Fei Jiao et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Charging-free electrochemical system for harvesting low-grade thermal energy
Yuan Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
A review of thermoelectrics research - Recent developments and potentials for sustainable and renewable energy applications
X. F. Zheng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin
Sheng Xu et al.
SCIENCE (2014)
Stretchable, Wireless Sensors and Functional Substrates for Epidermal Characterization of Sweat
Xian Huang et al.
SMALL (2014)
Conductive Nanomaterials for Printed Electronics
Alexander Kamyshny et al.
SMALL (2014)
Fabrication of Flexible Thermoelectric Thin Film Devices by Inkjet Printing
Ziyang Lu et al.
SMALL (2014)
Wafer-scale design of lightweight and transparent electronics that wraps around hairs
Giovanni A. Salvatore et al.
NATURE COMMUNICATIONS (2014)
Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring
Canan Dagdeviren et al.
NATURE COMMUNICATIONS (2014)
An electrochemical system for efficiently harvesting low-grade heat energy
Seok Woo Lee et al.
NATURE COMMUNICATIONS (2014)
A durable SWCNT/PET polymer foil based metal free counter electrode for flexible dye-sensitized solar cells
Syed Ghufran Hashmi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
25 GHz Embedded-Gate Graphene Transistors with High-K Dielectrics on Extremely Flexible Plastic Sheets
Jongho Lee et al.
ACS NANO (2013)
Materials and Optimized Designs for Human-Machine Interfaces Via Epidermal Electronics
Jae-Woong Jeong et al.
ADVANCED MATERIALS (2013)
Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy
M. A. Munoz-Garcia et al.
COMPUTERS AND ELECTRONICS IN AGRICULTURE (2013)
Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips
Teahoon Park et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Graphene-based electrodes for electrochemical energy storage
Chaohe Xu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Thermoelectric Energy Harvesting of Human Body Heat for Wearable Sensors
Vladimir Leonov
IEEE SENSORS JOURNAL (2013)
Effective thermal conductivity in thermoelectric materials
Lauryn L. Baranowski et al.
JOURNAL OF APPLIED PHYSICS (2013)
Rheological Control of the Coffee Stain Effect for Inkjet Printing of Ceramics
A. Friederich et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Ligand Exchange and the Stoichiometry of Metal Chalcogenide Nanocrystals: Spectroscopic Observation of Facile Metal-Carboxylate Displacement and Binding
Nicholas C. Anderson et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Liquid Crystalline and Shear-Induced Properties of an Aqueous Solution of Graphene Oxide Sheets
Xiaoming Yang et al.
LANGMUIR (2013)
An ultra-lightweight design for imperceptible plastic electronics
Martin Kaltenbrunner et al.
NATURE (2013)
Practical evaluation of organic polymer thermoelectrics by large-area R2R processing on flexible substrates
Roar R. Sondergaard et al.
ENERGY SCIENCE & ENGINEERING (2013)
Enhanced Performance of Dispenser Printed MA n-type Bi2Te3 Composite Thermoelectric Generators
Deepa Madan et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
Solvent Exfoliation of Transition Metal Dichalcogenides: Dispersibility of Exfoliated Nanosheets Varies Only Weakly between Compounds
Graeme Cunningham et al.
ACS NANO (2012)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Epidermal Differential Impedance Sensor for Conformal Skin Hydration Monitoring
Xian Huang et al.
BIOINTERPHASES (2012)
Concentrated solar thermoelectric generators
Lauryn L. Baranowski et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Perspectives on thermoelectrics: from fundamentals to device applications
M. Zebarjadi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Rice's Internal Variables Formalism and Its Implications for the Elastic and Conductive Properties of Cracked Materials, and for the Attempts to Relate Strength to Stiffness
Mark Kachanov et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2012)
Thin Thermoelectric Generator System for Body Energy Harvesting
Krishna T. Settaluri et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
A mixed-solvent strategy for facile and green preparation of graphene by liquid-phase exfoliation of graphite
Min Yi et al.
JOURNAL OF NANOPARTICLE RESEARCH (2012)
Gallium composition dependence of crystallographic and thermoelectric properties in polycrystalline type-I Ba8GaxSi46-x (nominal x=14-18) clathrates prepared by combining arc melting and spark plasma sintering methods
Hiroaki Anno et al.
JOURNAL OF SOLID STATE CHEMISTRY (2012)
Stability and Microstructure of Indium Tin Oxynitride Thin Films
Otto J. Gregory et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Materials for stretchable electronics
Sigurd Wagner et al.
MRS BULLETIN (2012)
Rational Synthesis of Ultrathin n-Type Bi2Te3 Nanowires with Enhanced Thermoelectric Properties
Genqiang Zhang et al.
NANO LETTERS (2012)
A new class of doped nanobulk high-figure-of-merit thermoelectrics by scalable bottom-up assembly
Rutvik J. Mehta et al.
NATURE MATERIALS (2012)
Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes
Da Zhao et al.
MICROELECTRONIC ENGINEERING (2012)
Solar hybrid systems with thermoelectric generators
E. A. Chavez-Urbiola et al.
SOLAR ENERGY (2012)
Ultrathin and lightweight organic solar cells with high flexibility
Martin Kaltenbrunner et al.
NATURE COMMUNICATIONS (2012)
Light-Weight Flexible Carbon Nanotube Based Organic Composites with Large Thermoelectric Power Factors
Choongho Yu et al.
ACS NANO (2011)
Conductive Inks with a Built-In Mechanism That Enables Sintering at Room Temperature
Michael Grouchko et al.
ACS NANO (2011)
Super-Elastic Graphene Ripples for Flexible Strain Sensors
Yi Wang et al.
ACS NANO (2011)
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
Jacob J. Adams et al.
ADVANCED MATERIALS (2011)
A Mixed-Solvent Strategy for Efficient Exfoliation of Inorganic Graphene Analogues
Kai-Ge Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Feasibility of photovoltaic - Thermoelectric hybrid modules
W. G. J. H. M. van Sark
APPLIED ENERGY (2011)
High-throughput production of pristine graphene in an aqueous dispersion assisted by non-ionic surfactants
L. Guardia et al.
CARBON (2011)
Dispenser printed composite thermoelectric thick films for thermoelectric generator applications
Deepa Madan et al.
JOURNAL OF APPLIED PHYSICS (2011)
Dispenser-printed planar thick-film thermoelectric energy generators
A. Chen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
Thermoelectric Properties of Molecular Nanowires
Yuanyuan Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Conducting Polymers: Efficient Thermoelectric Materials
Nidhi Dubey et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Multiple-Filled Skutterudites: High Thermoelectric Figure of Merit through Separately Optimizing Electrical and Thermal Transports
Xun Shi et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Carbon Nanotube Active-Matrix Backplanes for Conformal Electronics and Sensors
Toshitake Takahashi et al.
NANO LETTERS (2011)
Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)
Olga Bubnova et al.
NATURE MATERIALS (2011)
High-performance flat-panel solar thermoelectric generators with high thermal concentration
Daniel Kraemer et al.
NATURE MATERIALS (2011)
The 11th World Survey of Cardiac Pacing and Implantable Cardioverter-Defibrillators: Calendar Year 2009-A World Society of Arrhythmia's Project
Harry G. Mond et al.
PACE-PACING AND CLINICAL ELECTROPHYSIOLOGY (2011)
Rapid consolidation of powdered materials by induction hot pressing
Aaron D. LaLonde et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2011)
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Jonathan N. Coleman et al.
SCIENCE (2011)
Promising Thermoelectric Properties of Commercial PEDOT:PSS Materials and Their Bi2Te3 Powder Composites
B. Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Scalability of Roll-to-Roll Gravure-Printed Electrodes on Plastic Foils
Jinsoo Noh et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2010)
Modeling a Thermoelectric Generator Applied to Diesel Automotive Heat Recovery
N. Espinosa et al.
JOURNAL OF ELECTRONIC MATERIALS (2010)
Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte
C. C. Ho et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Doping dependence of electrical and thermal conductivity of nanoscale polyaniline thin films
Jiezhu Jin et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Semiconductor Nanocrystals Functionalized with Antimony Telluride Zintl Ions for Nanostructured Thermoelectrics
Maksym V. Kovalenko et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Highly Concentrated Graphene Solutions via Polymer Enhanced Solvent Exfoliation and Iterative Solvent Exchange
Yu Teng Liang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Flexible organic transistors and circuits with extreme bending stability
Tsuyoshi Sekitani et al.
NATURE MATERIALS (2010)
Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics
Dae-Hyeong Kim et al.
NATURE MATERIALS (2010)
Polyethylene nanofibres with very high thermal conductivities
Sheng Shen et al.
NATURE NANOTECHNOLOGY (2010)
Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates
Jolke Perelaer et al.
ADVANCED MATERIALS (2009)
Nanotube-Polymer Composites for Ultrafast Photonics
Tawfique Hasan et al.
ADVANCED MATERIALS (2009)
Liquid metal stretchable unbalanced loop antenna
Shi Cheng et al.
APPLIED PHYSICS LETTERS (2009)
Automotive Applications of Thermoelectric Materials
Jihui Yang et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
Wearable electronics self-powered by using human body heat: The state of the art and the perspective
Vladimir Leonov et al.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2009)
Stabilization of Superparamagnetic Iron Oxide Core-Gold Shell Nanoparticles in High Ionic Strength Media
Jit Kang Lim et al.
LANGMUIR (2009)
Influence of Fluid Physical Properties on Ink-Jet Printability
Daehwan Jang et al.
LANGMUIR (2009)
Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays
Sang-Il Park et al.
SCIENCE (2009)
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Bok Y. Ahn et al.
SCIENCE (2009)
Micropower energy harvesting
R. J. M. Vullers et al.
SOLID-STATE ELECTRONICS (2009)
Photovoltaic-thermoelectric hybrid systems: A general optimization methodology
D. Kraemer et al.
APPLIED PHYSICS LETTERS (2008)
Curving monolithic silicon for nonplanar focal plane array applications
Rostam Dinyari et al.
APPLIED PHYSICS LETTERS (2008)
A multiaxial stretchable interconnect using liquid-alloy-filled elastomeric microchannels
Hyun-Joong Kim et al.
APPLIED PHYSICS LETTERS (2008)
Safe radioisotope thermoelectric generators and heat sources for space applications
R. C. O'Brien et al.
JOURNAL OF NUCLEAR MATERIALS (2008)
Enhanced thermoelectric performance of rough silicon nanowires
Allon I. Hochbaum et al.
NATURE (2008)
Complex thermoelectric materials
G. Jeffrey Snyder et al.
NATURE MATERIALS (2008)
Thermoelectric performance of lanthanum telluride produced via mechanical alloying
Andrew F. May et al.
PHYSICAL REVIEW B (2008)
The optical advantages of curved focal plane arrays
Seung-Bum Rim et al.
OPTICS EXPRESS (2008)
Materials and noncoplanar mesh designs for integrated circuits with linear elastic responses to extreme mechanical deformations
Dae-Hyeong Kim et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Stretchable and foldable silicon integrated circuits
Dae-Hyeong Kim et al.
SCIENCE (2008)
Cooling, heating, generating power, and recovering waste heat with thermoelectric systems
Lon E. Bell
SCIENCE (2008)
Optimization of superlattice thermoelectric materials and microcoolers
Yanliang Zhang et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2007)
Suitability of a thermoelectric power generator for implantable medical electronic devices
Yang Yang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Controlled buckling of semiconductor nanoribbons for stretchable electronics
Yugang Sun et al.
NATURE NANOTECHNOLOGY (2006)
Direct ink writing of three-dimensional ceramic structures
Jennifer A. Lewis et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
Comparison of cw and pulsed operation with a TE-cooled quantum cascade infrared laser for detection of nitric oxide at 1900 cm-1
J. B. McManus et al.
APPLIED PHYSICS B-LASERS AND OPTICS (2006)
Thermoelectric materials for space and automotive power generation
JH Yang et al.
MRS BULLETIN (2006)
A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates
DY Khang et al.
SCIENCE (2006)
Thermal-photovoltaic solar hybrid system for efficient solar energy conversion
Y Vorobiev et al.
SOLAR ENERGY (2006)
Experimental observation of attractive and repulsive thermal forces on microcantilevers -: art. no. 194102
B Gotsmann et al.
APPLIED PHYSICS LETTERS (2005)
Ultraflexible organic field-effect transistors embedded at a neutral strain position
T Sekitani et al.
APPLIED PHYSICS LETTERS (2005)
Fundamentals of micromechanical thermoelectric sensors -: art. no. 044906
U Dürig
JOURNAL OF APPLIED PHYSICS (2005)
Transparent and flexible carbon nanotube transistors
E Artukovic et al.
NANO LETTERS (2005)
Application of the compatibility factor to the design of segmented and cascaded thermoelectric generators
GJ Snyder
APPLIED PHYSICS LETTERS (2004)
Thermoelectric microdevice fabricated by a MEMS-like electrochemical process
GJ Snyder et al.
NATURE MATERIALS (2003)
Supercooling of Peltier cooler using a current pulse
GJ Snyder et al.
JOURNAL OF APPLIED PHYSICS (2002)
Miniaturized thermoelectric generators based on poly-Si and poly-SiGe surface micromachining
M Strasser et al.
SENSORS AND ACTUATORS A-PHYSICAL (2002)
Thermoelectric properties of CoSb3
Y Kawaharada et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
Design characteristics and fabrication of radioisotope heat sources for space missions
GH Rinehart
PROGRESS IN NUCLEAR ENERGY (2001)
分享论文
