相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Multi-scale modeling and simulation of low-pressure methane bi-reforming using structured catalytic reactors
Florent Minette et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Modeling of Laboratory Steam Methane Reforming and CO2 Methanation Reactors
Paola Costamagna et al.
ENERGIES (2020)
Multi-scale two-dimensional packed bed reactor model for industrial steam methane reforming
Bhanu Vardhan Reddy Kuncharam et al.
FUEL PROCESSING TECHNOLOGY (2020)
A Short Review on Ni Based Catalysts and Related Engineering Issues for Methane Steam Reforming
Eugenio Meloni et al.
CATALYSTS (2020)
A Study on CO2 Methanation and Steam Methane Reforming over Commercial Ni/Calcium Aluminate Catalysts
Gabriella Garbarino et al.
ENERGIES (2020)
Comparison between numerical and experimental data of the radiative heat transfer in a natural gas/CO2/H2 turbulent flame
Larissa Domingues Lemos et al.
FUEL (2020)
Numerical analysis of turbulence radiation interaction effect on radiative heat transfer in a swirling oxyfuel furnace
Xiao Yang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Combined approach using mathematical modelling and artificial neural network for chemical industries: Steam methane reformer
Nguyen Dat Vo et al.
APPLIED ENERGY (2019)
Diagnostics and Prognostics-Oriented Modeling of an NGSR Fuel Processor for Application in SOFC Systems
F. Pugliese et al.
FUEL CELLS (2017)
Incident Radiative Heat Flux Based Method for the Coupled Run Length Simulation of Steam Cracking Furnaces
Yu Zhang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
A rigorous mathematical model for online prediction of tube skin temperature in an industrial top-fired steam methane reformer
P. Darvishi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)
CFD modeling of a industrial-scale steam methane reforming furnace
Anh Tran et al.
CHEMICAL ENGINEERING SCIENCE (2017)
CFD modeling and control of a steam methane reforming reactor
Liangfeng Lao et al.
CHEMICAL ENGINEERING SCIENCE (2016)
A Heterogeneous Multiscale Dynamic Model for Simulation of Catalytic Reforming Reactors
Grigorios Pantoleontos et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2016)
Eighty Years of Steam Reforming The technological milestones of catalysts, reformer design and operation in Billingham since 1936
Chris Murkin et al.
JOHNSON MATTHEY TECHNOLOGY REVIEW (2016)
Carbon Formation in Steam Reforming and Effect of Potassium Promotion Potassium dopants prevent carbon formation and aid catalyst recovery
Mikael Carlsson
JOHNSON MATTHEY TECHNOLOGY REVIEW (2015)
The influence of gas radiation on the thermal behavior of a 2D axisymmetric turbulent non-premixed methane-air flame
Felipe Roman Centeno et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
State-of-the-art catalysts for CH4 steam reforming at low temperature
Sofia D. Angeli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
A heterogeneous dynamic model for the simulation and optimisation of the steam methane reforming reactor
Grigorios Pantoleontos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Mathematical modeling of an industrial steam-methane reformer for on-line deployment
Dean A. Latham et al.
FUEL PROCESSING TECHNOLOGY (2011)
Steam Reforming of Methane Over Nickel: Development of a Multi-Step Surface Reaction Mechanism
L. Maier et al.
TOPICS IN CATALYSIS (2011)
Steady-state kinetics and mechanism of methane reforming with steam and carbon dioxide over Ni catalyst
A. K. Avetisov et al.
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2010)
Influence of ceria and nickel addition to alumina-supported Rh catalyst for propane steam reforming at low temperatures
Yan Li et al.
APPLIED CATALYSIS A-GENERAL (2009)
Hybrid Modeling of Methane Reformers. 1. A Metamodel for the Effectiveness Factor of a Catalyst Pellet with Complex Geometry
Andre Luis Alberton et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
Effect of design parameters on performance of a top fired natural gas reformer
Hadi Ebrahimi et al.
APPLIED THERMAL ENGINEERING (2008)
Operation of an industrial steam reformer under severe condition: A simulation study
J. Shayegan et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2008)
Software development for design and simulation of terraced wall and top fired primary steam reformers
A. Zamaniyan et al.
COMPUTERS & CHEMICAL ENGINEERING (2008)
Process simulation of natural gas steam reforming:: Fuel distribution optimisation in the furnace
Agostino Olivieri et al.
FUEL PROCESSING TECHNOLOGY (2008)
Numerical simulation of the interaction between turbulence and radiation in reactive flows
P. J. Coelho
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2007)
Mass and heat transfer limitations in a heterogeneous model of a gas-heated steam reformer
Margrete H. Wesenberg et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Combustion and pyrolysis reactions in a naphtha cracking furnace
Yunlong Han et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2007)
Simulation of natural gas steam reforming furnace
Zunhong Yu et al.
FUEL PROCESSING TECHNOLOGY (2006)
CFD simulations of steam cracking furnaces using detailed combustion mechanisms
GD Stefanidis et al.
COMPUTERS & CHEMICAL ENGINEERING (2006)
Four challenges for nickel steam-reforming catalysts
J Sehested
CATALYSIS TODAY (2006)
Application of the conservative discrete transfer radiation method to a furnace with complex geometry
M Baburic et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2005)
Isotopic and kinetic assessment of the mechanism of reactions of CH4 with CO2 or H2O to form synthesis gas and carbon on nickel catalysts
JM Wei et al.
JOURNAL OF CATALYSIS (2004)
Use of a heterogeneous two-dimensional model to improve the primary steam reformer performance
MN Pedernera et al.
CHEMICAL ENGINEERING JOURNAL (2003)
Equilibria in fuel cell gases - I. Equilibrium compositions and reforming conditions
K Sasaki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Catalyst shape as a design parameter-optimum shape for methane-steam reforming catalyst
JSS Mohammadzadeh et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2002)
The kinetics of methane steam reforming over a Ni/α-Al2O catalyst
KH Hou et al.
CHEMICAL ENGINEERING JOURNAL (2001)
Modeling for industrial heat exchanger type steam reformer
YH Yu et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2001)
Modelling and simulation of a steam reforming tube with furnace
S Grevskott et al.
CHEMICAL ENGINEERING SCIENCE (2001)