相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Monolithic digital patterning of polydimethylsiloxane with successive laser pyrolysis
Jaeho Shin et al.
NATURE MATERIALS (2021)
Fabrication of polyimide microfluidic devices by laser ablation based additive manufacturing
Xingjian Hu et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)
Recent Progress in Simple and Cost-Effective Top-Down Lithography for ≈10 nm Scale Nanopatterns: From Edge Lithography to Secondary Sputtering Lithography
Woo-Bin Jung et al.
ADVANCED MATERIALS (2020)
Well-organized organosilane composites for adhesion enhancement of heterojunctions
Tzu-Jung Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Laser-induced graphene enabled 1D fiber electronics
Meihong He et al.
CARBON (2020)
Long-Lived, Transferred Crystalline Silicon Carbide Nanomembranes for Implantable Flexible Electronics
Hoang-Phuon Phan et al.
ACS NANO (2019)
An Integrated Brain-Machine Interface Platform With Thousands of Channels
Elon Musk
JOURNAL OF MEDICAL INTERNET RESEARCH (2019)
Functional Polyimide-Based Electrospun Fibers for Biomedical Application
Diana Serbezeanu et al.
MATERIALS (2019)
Supercapacitors Fabricated via Laser-Induced Carbonization of Biomass-Derived Poly(furfuryl alcohol)/Graphene Oxide Composites
Gillian F. Hawes et al.
ACS APPLIED NANO MATERIALS (2019)
Direct Laser Writing of Functional Strain Sensors in Polyimide Tubes
Xiaoshuang Duan et al.
ACS APPLIED POLYMER MATERIALS (2019)
Capillary microfluidics in microchannels: from microfluidic networks to capillaric circuits
Ayokunle Olanrewaju et al.
LAB ON A CHIP (2018)
Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity
Debkalpa Goswami et al.
NANO LETTERS (2018)
Polyimide for silicon solar cells with double-sided textured pyramids
Ngwe Zin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Microfluidic channel optimization to improve hydrodynamic dissociation of cell aggregates and tissue
Xiaolong Qiu et al.
SCIENTIFIC REPORTS (2018)
Emerging hydrovoltaic technology
Zhuhua Zhang et al.
NATURE NANOTECHNOLOGY (2018)
Experimental and modeling study of CO2 laser writing induced polyimide carbonization process
Xiaojun Ruan et al.
MATERIALS & DESIGN (2018)
Curvy surface conformal ultra-thin transfer printed Si optoelectronic penetrating microprobe arrays
Kyoseung Sim et al.
NPJ FLEXIBLE ELECTRONICS (2018)
Tribological properties of polyimide-modified UHMWPE for bushing materials of seawater lubricated sliding bearings
Song Chen et al.
TRIBOLOGY INTERNATIONAL (2017)
SINGLE-BEAM ACOUSTIC TRAPPING OF RED BLOOD CELLS AND POLYSTYRENE MICROSPHERES IN FLOWING RED BLOOD CELL SALINE AND PLASMA SUSPENSIONS
Hsiao-Chuan Liu et al.
ULTRASOUND IN MEDICINE AND BIOLOGY (2017)
Polyimide-based lubricating coatings synergistically enhanced by MoS2@HCNF hybrid
Hong Yuan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
High-performance stacked in-plane supercapacitors and supercapacitor array fabricated by femtosecond laser 3D direct writing on polyimide sheets
Shutong Wang et al.
ELECTROCHIMICA ACTA (2017)
In situ MoS2 Decoration of Laser-Induced Graphene as Flexible Supercapacitor Electrodes
Francesca Clerici et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring
Yasser Khan et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Polymeric Biomaterials for Medical Implants and Devices
Adrian J. T. Teo et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Polymeric Biomaterials for Medical Implants and Devices
Adrian J. T. Teo et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Highly Stretchable and Sensitive Unidirectional Strain Sensor via Laser Carbonization
Rahim Rahimi et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Lightweight, Superelastic, and Mechanically Flexible Graphene/Polyimide Nanocomposite Foam for Strain Sensor Application
Yuyang Qin et al.
ACS NANO (2015)
Facile fabrication of flexible all solid-state micro-supercapacitor by direct laser writing of porous carbon in polyimide
Jung Bin In et al.
CARBON (2015)
Micro-Pattern Fabrication for Medical Device Applications
Yu-Jung Huang et al.
NANOSCIENCE AND NANOTECHNOLOGY LETTERS (2015)
Fiber-Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Wei Zeng et al.
ADVANCED MATERIALS (2014)
A high-density, high-channel count, multiplexed μECoG array for auditory-cortex recordings
Monty A. Escabi et al.
JOURNAL OF NEUROPHYSIOLOGY (2014)
Laser-induced porous graphene films from commercial polymers
Jian Lin et al.
NATURE COMMUNICATIONS (2014)
Integrated 122-GHz Antenna on a Flexible Polyimide Substrate With Flip Chip Interconnect
Stefan Beer et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2013)
A Compact Polyimide-Based UWB Antenna for Flexible Electronics
Haider R. Khaleel et al.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2012)
Acoustically enriching, large-depth aquatic sampler
Jonas Jonsson et al.
LAB ON A CHIP (2012)
Advanced polyimide materials: Syntheses, physical properties and applications
Der-Jang Liaw et al.
PROGRESS IN POLYMER SCIENCE (2012)
In vitro evaluation of the long-term stability of polyimide as a material for neural implants
Birthe Rubehn et al.
BIOMATERIALS (2010)
Fabrication and Application of Polyimide Plastic Molds for Nanoimprint Lithography
Chun-Chang Wu et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2010)
Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics
Dae-Hyeong Kim et al.
NATURE MATERIALS (2010)
The carbon black effect on crack formation during pyrolysis step in liquid silicon infiltration process for Cf/C-SiC composites
Se-young Kim et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2010)
Erosion of POSS-polyimide films under hypervelocity impact and atomic oxygen: The role of mechanical properties at elevated temperatures
R. Verker et al.
ACTA MATERIALIA (2009)
Surface modification of polyimide film by coupling reaction for copper metallization
Hwa Jin Kim et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2009)
Damage effect of keV proton irradiation on aluminized Kapton film
Ruiqi Li et al.
RADIATION PHYSICS AND CHEMISTRY (2008)
The crack development on the micro- and mesoscopic scale during the pyrolysis of carbon fibre reinforced plastics to carbon/carbon composites
J. Schulte-Fischedick et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Polyimide nanostructures fabricated by nanoimprint lithography and its applications
B Cui et al.
MICROELECTRONIC ENGINEERING (2006)
Experimental studies on low-temperature pyrolysis of municipal household garbage-temperature influence on pyrolysis product distribution
Y Wang et al.
RENEWABLE ENERGY (2005)
Efficient fabrication process for superconducting integrated circuits using photosensitive polyimide insulation layers
K Kikuchi et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2005)
Low-temperature processable inherently photosensitive polyimide as a gate insulator for organic thin-film transistors
S Pyo et al.
APPLIED PHYSICS LETTERS (2005)
Experimental studies and thermal modelling of 1064-and 532-nm Nd:YVO4 micro-laser ablation of polyimide
PE Dyer et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)
XPS investigation of the chemical characteristics of Kapton films ablated by a pulsed TEA CO2 laser
DW Zeng et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Pyrolysis of Kapton® in air:: An in situ DRIFT study
EE Ortelli et al.
APPLIED SPECTROSCOPY (2001)
Polyimide-based microfluidic devices
S Metz et al.
LAB ON A CHIP (2001)