相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of Nb or Ta Interlayer on Microstructure and Mechanical Properties of Graphite/Ti6Al4V Alloy Joints
Xinjian Ma et al.
ADVANCED ENGINEERING MATERIALS (2021)
Interfacial reactions and microstructure related properties of explosively welded tantalum and steel sheets with copper interlayer
H. Paul et al.
MATERIALS & DESIGN (2021)
Effect of Bonding Temperature on Microstructure and Mechanical Properties of 304L/Zircaloy-4 Diffusion-Bonded Joints with Ni/Ta Hybrid Interlayer
Zhen Wang et al.
ADVANCED ENGINEERING MATERIALS (2021)
Microstructural and mechanical properties of CFC composite/Ti6Al4V joints brazed with Ag-Cu-Ti and refractory metal foils
Yuhang Kang et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)
Study of Ag precipitation and mechanical properties of Ti-Ta-Ag ternary alloy
Jun-Min Zhang et al.
RSC ADVANCES (2021)
Recent Advances in Active Metal Brazing of Ceramics and Process
S. Mishra et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Ultrasonic-assisted bonding of Al2O3 ceramic, Cu, and 5056 aluminum alloy with Sn-Zn-Sb solders
Yongchao Wu et al.
WELDING IN THE WORLD (2020)
Vacuum brazing of Mo to 316L stainless steel using BNi-2 paste and Cu interlayer
Mei Min et al.
VACUUM (2020)
Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer
Yating Zhao et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Joining of tungsten to CuCrZr alloy with Cu-TiH2-Ni filler and Cu interlayer
Shaoxue Peng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Microstructures and mechanical properties of brazed Al2O3/Cu joints with bismuth glass
Haiyan Chen et al.
CERAMICS INTERNATIONAL (2019)
In situ TiB-network-reinforced Al2O3/Ti6Al4V joints
Yang Weiqi et al.
CERAMICS INTERNATIONAL (2019)
Joining of Cf/SiC composite to GH783 superalloy with NiPdPtAu-Cr filler alloy and a Mo interlayer
Wen-Wen Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effects of Cu interlayers on the microstructure and mechanical properties of Al2O3/AgCuTi/Kovar brazed joints
Ying Wang et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)
Microstructural and mechanical characterizations of W/CuCrZr and W/steel joints brazed with Cu-22TiH2 filler
Liangxing Peng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Active brazed Invar-SiO2f/SiO2 joint using a low-expansion composite interlayer
Z. Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Microstructural evolution and thermal stress relaxation of Al2O3/Cr18Ni9Ti brazed joints with nickel foam
Rujian Sun et al.
VACUUM (2018)
Effects of surface microstructure on the active element content and wetting behavior of brazing filler metal during brazing Ti3SiC2 ceramic and Cu
H. Y. Chen et al.
VACUUM (2018)
Microstructure, residual stress and mechanical properties of Al2O3/Nb joints vacuum-brazed with two Ag-based active fillers
Y. Wang et al.
VACUUM (2018)
Evaluation of mechanically alloyed Cu-based powders as filler alloy for brazing tungsten to a reduced activation ferritic-martensitic steel
J. de Prado et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Characterization of microstructure and mechanical properties of Al2O3/TiAl joints vacuum-brazed with Ag-Cu-Ti plus W composite filler
Zhenwen Yang et al.
VACUUM (2017)
Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fillers
G. B. Niu et al.
CERAMICS INTERNATIONAL (2017)
Effect of Ti content on the metallization layer and copper / alumina brazed joint
W. Fu et al.
CERAMICS INTERNATIONAL (2017)
Microstructure and mechanical properties of Al2O3 ceramic and TiAl alloy joints brazed with Ag-Cu-Ti filler metal
G. B. Niu et al.
CERAMICS INTERNATIONAL (2016)
Investigation of tungsten/steel brazing using Ta and Cu interlayer
Wensheng Liu et al.
FUSION ENGINEERING AND DESIGN (2016)
Cold rolled tungsten (W) plates and foils: Evolution of the microstructure
Simon Bonk et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti plus Mo composite interlayer
Rui Pan et al.
MATERIALS & DESIGN (2016)
Microstructural evolution and characterisation of interfacial phases in Al2O3/Ag-Cu-Ti/Al2O3 braze joints
Majed Ali et al.
ACTA MATERIALIA (2015)
Corrosion resistance of ultra-high purity porous alumina ceramic support
Wu Qin et al.
MATERIALS LETTERS (2015)
Brazing copper and alumina metallized with Ti-containing Sn0.3Ag0.7Cu metal powder
W. Fu et al.
MATERIALS & DESIGN (2015)
Brazing W and Fe-Ni-Co alloy using Ag-28Cu and Ag-27Cu-3.5Ti fillers
Jianli Shang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Interfacial characterization of alumina-to-alumina joints fabricated using silver-copper-titanium interlayers
Kun-Lin Lin et al.
MATERIALS CHARACTERIZATION (2014)
Thermodynamic modelling of the Ag-Cu-Ti ternary system
Olivier Dezellus et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2011)
Brazing copper to alumina using reactive CuAgTi alloys
O. Kozlova et al.
ACTA MATERIALIA (2010)
Brazing of doped graphite to Cu using stress relief interlayers
Zhihong Zhong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Joining of partially sintered alumina to alumina, titanium, Hastealloy and C-SiC composite using Ag-Cu brazes
R. Asthana et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
The relation between wetting and-interfacial chemistry in the CuAgTi/alumina system
R. Voytovych et al.
ACTA MATERIALIA (2006)
Interfacial reactions in alumina/CuAgTi braze/CuNi system
C Valette et al.
SCRIPTA MATERIALIA (2005)
Correlation between the mechanical properties and the microstructural behaviour of Al2O3-(Ag-Cu-Ti) brazed joints
S Mandal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Joining of SiC ceramic to Ni-based superalloy with functionally gradient material fillers and a tungsten intermediate layer
SJ Li et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Reaction layers and mechanisms for a Ti-activated braze on sapphire
JJ Stephens et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis
S Carlsson et al.
ACTA MATERIALIA (2001)
分享论文
