相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Manu K. Mohan et al.
CEMENT & CONCRETE COMPOSITES (2021)
Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
Manu K. Mohan et al.
CEMENT AND CONCRETE RESEARCH (2021)
Mechanical properties of 3D printed concrete in hot temperatures
Aktham S. Alchaar et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
A review of 3D printed concrete: Performance requirements, testing measurements and mix design
Shaodan Hou et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
Manu K. Mohan et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Early age shrinkage phenomena of 3D printed cementitious materials with superabsorbent polymers
J. van der Putten et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Autogenous shrinkage and drying shrinkage of recycled aggregate concrete: A review
Yuguang Mao et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Sustainable materials for 3D concrete printing
Shantanu Bhattacherjee et al.
CEMENT & CONCRETE COMPOSITES (2021)
3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates
Gang Bai et al.
CEMENT & CONCRETE COMPOSITES (2021)
Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
Jolien Van der Putten et al.
MATERIALS (2021)
Evaluating the printability of concretes containing lightweight coarse aggregates
A. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2020)
A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials
A. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
Karol Federowicz et al.
MATERIALS (2020)
Plastic shrinkage cracking in 3D printed concrete
Gerrit M. Moelich et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Adopting recycled aggregates as sustainable construction materials: A review of the scientific literature
Wei Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Microstructural Characterization of 3D Printed Cementitious Materials
Jolien Van Der Putten et al.
MATERIALS (2019)
Assessment of behaviour and cracking susceptibility of cementitious systems under restrained conditions through ring tests: A critical review
Fragkoulis Kanavaris et al.
CEMENT & CONCRETE COMPOSITES (2019)
Seawater cement paste: Effects of seawater and roles of water film thickness and superplasticizer dosage
L. G. Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical characterization of 3D printable concrete
A. Rahul et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
Pshtiwan Shakor et al.
FRONTIERS IN BUILT ENVIRONMENT (2019)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Drying shrinkage and cracking resistance of concrete made with ternary cementitious components
Xiang Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Understanding restraint effect of coarse aggregate on the drying shrinkage of self-compacting concrete
Wen Zhu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete
Tarek Uddin Mohammed et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of using recycled concrete aggregates on the shrinkage of high performance concrete
Andreu Gonzalez-Corominas et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of superplasticizer type on packing density, water film thickness and flowability of cementitious paste
Leo G. Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
The influence of the use of recycled aggregates on the compressive strength of concrete: a review
R. V. Silva et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2015)
The effect of coarse aggregate content and size on the age at cracking of bonded concrete overlays subjected to restrained deformation
Thomas Dittmer et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of the coarse aggregate size on pipe flow of pumped concrete
Myoung Sung Choi et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Concrete mix design based on water film thickness and paste film thickness
Leo G. Li et al.
CEMENT & CONCRETE COMPOSITES (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
Combined effects of water film thickness and paste film thickness on rheology of mortar
A. K. H. Kwan et al.
MATERIALS AND STRUCTURES (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Mortar design based on water film thickness
L. G. Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Effect of coarse aggregate characteristics on concrete rheology
Jiong Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Water film thickness, flowability and rheology of cement-sand mortar
A. K. H. Kwan et al.
ADVANCES IN CEMENT RESEARCH (2010)
Design, data and process issues for mega-scale rapid manufacturing machines used for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2008)
Integration approach of the Couette inverse problem of powder type self-compacting concrete in a wide-gap concentric cylinder rheometer
G. Heirman et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2008)
Packing density of cementitious materials : Part 1 - measurement using a wet packing method
Henry H. C. Wong et al.
MATERIALS AND STRUCTURES (2008)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression
T Akçaoglu et al.
CEMENT & CONCRETE COMPOSITES (2004)
Assessing residual stress development and stress relaxation in restrained concrete ring specimens
AB Hossain et al.
CEMENT & CONCRETE COMPOSITES (2004)