相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Dimensional accuracy, flowability, wettability, and porosity in inkjet 3DP for gypsum and cement mortar materials
Pshtiwan Shakor et al.
AUTOMATION IN CONSTRUCTION (2020)
Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies
Norman Hack et al.
MATERIALS (2020)
A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
Tao Ding et al.
COMPOSITE STRUCTURES (2020)
A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
Sooraj A. O. Nair et al.
CEMENT & CONCRETE COMPOSITES (2020)
Hardened properties of layered 3D printed concrete with recycled sand
Tao Ding et al.
CEMENT & CONCRETE COMPOSITES (2020)
Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
Arun R. Arunothayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization
Zifan Geng et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study
Yu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Examining the significance of infill printing pattern on the anisotropy of 3D printed concrete
Daniel Heras Murcia et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Fracture response of metallic particulate-reinforced cementitious composites: Insights from experiments and multiscale numerical simulations
Sumeru Nayak et al.
CEMENT & CONCRETE COMPOSITES (2019)
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders
Hussam Alghamdi et al.
MATERIALS & DESIGN (2019)
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
Taylor Marchment et al.
MATERIALS & DESIGN (2019)
Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
Emmanuel Keita et al.
CEMENT AND CONCRETE RESEARCH (2019)
Mechanical characterization of 3D printable concrete
A. Rahul et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Linking fresh paste microstructure, rheology and extrusion characteristics of cementitious binders for 3D printing
Sooraj A. O. Nair et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Ductility of 3D printed concrete reinforced with short straight steel fibers
F. P. Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Sarah Al-Qutaifi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Zhijian Li et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Particle-bed 3D printing in concrete construction - Possibilities and challenges
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2018)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Properties of 3D-printed fiber-reinforced Portland cement paste
Manuel Hambach et al.
CEMENT & CONCRETE COMPOSITES (2017)
Strain energy and process zone based fracture characterization of a novel iron carbonate binding material
Sumanta Das et al.
ENGINEERING FRACTURE MECHANICS (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Flexural fracture response of a novel iron carbonate matrix - Glass fiber composite and its comparison to Portland cement-based composites
Sumanta Das et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Crack propagation and strain localization in metallic particulate-reinforced cementitious mortars
Sumanta Das et al.
MATERIALS & DESIGN (2015)
The fracture response of blended formulations containing limestone powder: Evaluations using two-parameter fracture model and digital image correlation
Sumanta Das et al.
CEMENT & CONCRETE COMPOSITES (2014)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
Crack propagation paths in layered, graded composites
M. T. Tilbrook et al.
COMPOSITES PART B-ENGINEERING (2006)
A simplified method for determining double-K fracture parameters for three-point bending tests
SL Xu et al.
INTERNATIONAL JOURNAL OF FRACTURE (2000)
分享论文
