☆ 4.7 Article

Enhanced oxidation resistance of Mo-modified Si-SiC coating on C/C composites by laser-inducing

APPLIED SURFACE SCIENCE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K

Xuanru Ren et al.

Summary: ZrB2-SiC coatings were investigated for their oxidation behavior with varying ZrB2 content, showing that the 60ZrB(2)-40SiC coating exhibited the best oxygen blocking ability due to dispersed Zr-oxides nanocrystal particles enhancing the oxidation protection efficiency.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and high-temperature oxidation resistance of MoSi2-ZrO2 composite coatings for Niobium substrate

Lu Zhu et al.

Summary: By reusing spent MoSi2 heating elements to fabricate MoSi2-ZrO2 coatings, the oxidation resistance of niobium material at high temperatures can be improved. The addition of ZrO2 can reduce the formation of cracks in the coatings, and the formation of (Mo,Nb)(5)Si-3 diffusion layer at high temperatures indicates good metallurgical bonding.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Particle distribution and microstructure of IN718/WC composite coating fabricated by electromagnetic compound field-assisted laser cladding

Kun Huo et al.

Summary: In this study, IN718/WC composite coatings were fabricated by electromagnetic compound field-assisted laser cladding, and the microhardness of the coating was improved through enhanced Marangoni convection induced by the electromagnetic compound field. The application of appropriate magnetic and direct current fields can promote the decomposition of WC particles in the molten pool, resulting in increased hardness of the coating.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

High strength retention and improved oxidation resistance of C/C composites by utilizing a layered SiC ceramic coating

Tao Li et al.

Summary: The study focused on improving the negative effects of siliconization caused by SiC coatings on C/C composites by pre-preparing a carbon transition coating. Results showed that C/C composites with the carbon transition coating had better oxidation resistance compared to those without it.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation behaviour of SiC ceramic coating for C/C composites prepared by pressure-less reactive sintering in wet oxygen: Experiment and first-principle simulation

Pengfei Zhang et al.

Summary: SiC ceramic coating effectively prevents oxidation of C/C composites, with water vapor accelerating oxidation and promoting the formation of a glassy layer. The oxidation process can be divided into two stages, with the accelerated oxidation rate attributed to weakened bonds in the glassy scale formed due to hydroxide radicals from water vapor.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ablation resistance of HfC-TaC/HfC-SiC alternate coating for SiC-coated carbon/carbon composites under cyclic ablation

Guanghui Feng et al.

Summary: Alternate coatings of HfC-TaC/HfC-SiC with different sublayer thicknesses were fabricated on SiC-coated carbon/carbon composites, showing the best ablation performance due to the dense oxide layer and stress release from dendritic cracks. Additionally, exfoliation at the interface of adjacent sublayers in some coatings led to violent evaporation of exposed sublayers.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Thermal performance and ablation characteristics of C/C-SiC for thermal protection of hypersonic vehicle

Yi-ang Shi et al.

Summary: A small-scale plasma ablation facility was used to test the C/C-SiC composite material under two heat flux conditions, revealing different ablation characteristics in different regions, with specific reactions identified in each region.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

TEM study on the morphology and interface microstructure of C/C-SiC composites fabricated by liquid infiltration

K. X. Zhang et al.

Summary: This study systematically investigated the fine microstructure of C/C-SiC composites fabricated by liquid silicon infiltration, and identified two main types of interfaces in the composites. Additionally, the formation mechanism of the SiC/carbon interface was discussed based on the fine microstructure observed.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Long-time ablation behavior of the multilayer alternating CVD-(SiC/HfC)3 coating for carbon/carbon composites

Jian Zhang et al.

Summary: The SiC/HfC coating with multi-layer alternating structure prepared on C/C composites by LPCVD showed improved ablation resistance under ultra-high temperature environments, attributed to the formation of Hf-Si-O sticky glass phase and the multi-layer structure.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Significant improvement of the self-protection capability of ultra-high temperature ceramic matrix composites

Francesca Servadei et al.

Summary: The oxidation behavior of Cf/ZrB2-SiC materials with different fiber architectures was investigated, showing that the good dispersion of ZrB2 particles in the polymer-derived SiC(O) matrix promoted the formation of compact oxide scales. It was found that a ZrB2 content of 20-30% in the material was a good compromise between lightness and oxidation resistance.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The oxidation resistance of the heterophase ZrSi2-MoSi2-ZrB2 powders - Derived coatings

A. N. Astapov et al.

Summary: This study investigates the oxidation resistance of coatings manufactured using reactive impregnation, finding that they can effectively inhibit oxygen ingress and further oxidation of the substrate. However, high temperatures may result in evaporation of the glass phase. The temperature gradient across the coatings' thickness helps retain some glassy phase, enhancing protection against oxygen diffusion.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Oxidation behavior and mechanism of MoSi2-Y2O3 composite coating fabricated by supersonic atmospheric plasma spraying

Chang-Cong Wang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Selective Laser Melting of In Situ TiB/Ti6Al4V Composites: Formability, Microstructure Evolution and Mechanical Performance

Yue Su et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Repair of SiC coating on carbon/carbon composites by laser cladding technique

Han-Hui Wang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Influence of MoSi2on oxidation protective ability of TaB2-SiC coating in oxygen-containing environments within a broad temperature range

Xuanru Ren et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of tantalum carbide on the ablation behaviors of hafnium carbide coating for C/C composites under single and cyclic oxyacetylene torch environments

Guanghui Feng et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

In Situ Mo(Si,Al)2-Based Composite through Selective Laser Melting of a MoSi2-30 wt.% AlSi10Mg Mixture

Tatevik Minasyan et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C

Menglin Zhang et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Comparing oxidation behaviors at 1773 K and 1973 K of HfB2-MoSi2/SiC-Si coating prepared by a combination method of pack cementation, slurry painting and in-situ synthesis

Pei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of Chromium and Molybdenum Addition on the Microstructure of In Situ TiC-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying

Damian Janicki

MATERIALS (2020)

添加到收藏夹

Review Engineering, Aerospace

Research progress on active thermal protection for hypersonic vehicles

Silong Zhang et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

添加到收藏夹

Article Materials Science, Ceramics

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

Cuiyan Li et al.

JOURNAL OF ADVANCED CERAMICS (2019)

添加到收藏夹

Article Chemistry, Physical

Carbon nanotube/carbon composite fiber with improved strength and electrical conductivity via interface engineering

Songlin Zhang et al.

CARBON (2019)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and oxidation behavior of MoSi2-based coating on carbon/carbon composites

Chang-Cong Wang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation resistance and mechanical properties of LaB6-MoSi2-SiC ceramic coating toughened by SiC nanowires

Changcong Wang et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation protective MoSi2-SiC-Si coating for graphite materials prepared by slurry dipping and vapor silicon infiltration

Yan Jiang et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

Research on the Thermal Behaviour of a Selectively Laser Melted Aluminium Alloy: Simulation and Experiment

Zhonghua Li et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and microstructure of ZrB2-ZrC-SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy

Chaoqiang Xue et al.

JOURNAL OF ADVANCED CERAMICS (2018)

添加到收藏夹

Article Chemistry, Physical

Surface morphological modification of crosslinked hydrophilic co-polymers by nanosecond pulsed laser irradiation

Gaston A. Primo et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Comparison of the oxidation behaviors of SiC coatings on C/C composites prepared by pack cementation and chemical vapor deposition

Lu Li et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

An investigation on the in situ synthesis-sintering and mechanical properties of MoSi2-xSiC composites prepared by spark plasma sintering

Soheila Esmaeily et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and oxidation of multi-layer MoSi2-CrSi2-Si coatings for SiC coated carbon/carbon composites

Tao Feng et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anti-oxidation property of a multi-layer coating for carbon/carbon composites in a wind tunnel at 1500 °C

Fu Qian-gang et al.

NEW CARBON MATERIALS (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and oxidation protective ability of MoSi2-SiC-Si coating toughened with SiC whiskers for carbon/carbon composites

Q. -G. Fu et al.

SURFACE ENGINEERING (2008)

添加到收藏夹

Article Chemistry, Physical

AMOSi2-SiC-Si/glass oxidation protective coating for carbon/carbon composites

Fu Qian-Gang et al.

CARBON (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Melt instabilities during laser surface alloying

MH McCay et al.

JOURNAL OF LASER APPLICATIONS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.