4.7 Article

Two-dimensional SiP3 monolayer as promising anode with Record-high capacity and fast diffusion for Alkali-ion battery

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Novel CuTe monolayer as promising anode material for Na-ion batteries: A theoretical study

Faling Ling et al.

Summary: A new two-dimensional material, monolayer copper telluride (ML-CuTe), has been discovered with excellent thermodynamic, kinetic, and mechanical stabilities, making it a promising candidate for use as an anode material in sodium-ion batteries.

APPLIED SURFACE SCIENCE (2022)

Article Engineering, Environmental

Densified MoS2/Ti3C2 films with balanced porosity for ultrahigh volumetric capacity sodium-ion battery

Kun Ma et al.

Summary: This study reported flexible and compact MoS2/Ti3C2 hybrid films with exceptional performance in SIB batteries, maintaining high capacity and stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

High storage capacity and small volume change of potassium-intercalation into novel vanadium oxychalcogenide monolayers V2S2O, V2Se2O and V2Te2O: An ab initio DFT investigation

Yang-Xin Yu

Summary: The new two-dimensional V(2)Ch(2)O (Ch = S, Se, and Te) monolayer electrode materials show excellent thermal, dynamical, and mechanical stabilities. The exothermic adsorption energies prevent dendrite formation, while electrode potentials decrease diffusion barriers of potassium atoms and maintain metallic characteristics during K-intercalation. The V(2)Ch(2)O monolayers are promising for PIBs with high capacities and long cycle lives.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Theoretical studies of SiC van der Waals heterostructures as anodes of Li-ion batteries

Xiaojie He et al.

Summary: Using density functional theory (DFT), the potential of 2D SiC, SiC with Stone-Wales defect (SW-SiC), and their van der Waals heterostructures with graphene as anode materials have been studied, revealing improved electronic conductivity, Li adsorption properties, and lithium ion diffusion barriers with the introduction of graphene. The heterostructures demonstrate excellent electrochemical performance, higher specific capacity, and comparable Li ion diffusion barriers to other graphene heterostructures, showcasing the potential for enhancing electrode materials with heterojunctions.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Promising anode material BN/VS2 heterostructure for the Li-ion battery: The first-principles study

Chunmei Tang et al.

Summary: The BN/VS2 heterostructure shows better structural stability and mechanical stiffness as an anode material for lithium-ion batteries, with enhanced adsorption capacity for Li atoms and higher Li capacity compared to monolayer VS2 and graphene/VS2 heterostructure.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Screening MXenes for novel anode material of lithium-ion batteries with high capacity and stability: A DFT calculation

Xiaojun Zhao et al.

Summary: Through DFT calculations and AIMD simulations, Ti2N and V2N are identified as promising anode materials for lithium-ion batteries due to their high stability, low deformation rate, and low diffusion barrier, which accelerates the charging and discharging process. Additionally, a linear relationship between lithium-ion concentration and adsorption energy is established for guiding the design of high-capacity electrode materials.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Graphene-like BSi as a promising anode material for Li- and Mg-ion batteries: A first principle study

Chu Xiao et al.

Summary: Monolayer BSi has been predicted as a phonon-mediated superconductor and has been studied for its potential as an anode material for rechargeable batteries. The theoretical capacities of monolayer BSi towards Li and Mg storage are 1374 mAhg(-1) and 2749 mAhg(-1) respectively, with controllable volume change and high ion diffusion rate ensuring high performance in Li and Mg-ion batteries. These results provide insight into the energy-storage mechanisms and potential applications of 2D BSi materials.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Synergetic effect of localized and delocalized π electron on Li storage properties of Si/C heterostructures

Deepak S. Gavali et al.

Summary: The study introduces a multilayer heterostructure of graphene/graphite with silicon monolayer as a potential anode material for Li-ion batteries, showing high specific capacity and stability. The specific capacity can be tuned by adjusting the ratio of carbon and silicon layers.

CARBON (2021)

Article Chemistry, Physical

Is graphite nanomesh a promising anode for the Na/K-Ions batteries?

Chen Yang et al.

Summary: Based on first-principles calculations, graphite nanomesh with a hole density of 46% (GN46) is demonstrated to be a promising anode material for both NIB and KIB, with high ion storage capacities and improved diffusion properties.

CARBON (2021)

Article Chemistry, Physical

Liquid Exfoliated SnP3 Nanosheets for Very High Areal Capacity Lithium-Ion Batteries

Ruiyuan Tian et al.

Summary: The liquid phase exfoliation technique is used to produce nanosheets of SnP3, a 2D material with high theoretical capacity for use in lithium storing anodes, achieving close to theoretical value in terms of active-mass-normalized capacities. Incorporating carbon nanotubes into the electrodes enhances conductivity and toughness, allowing for the production of electrodes with high specific and areal capacities, good rate performance, and stability. Full-cells fabricated with commercial cathode materials show near-record energy densities with areal capacities of approximately 29 mAh cm(-2).

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Theoretical investigation of the intercalation mechanism of VS2/MXene heterostructures as anode materials for metal-ion batteries

Na Li et al.

Summary: Two heterostructures VS2/Ti2CT2 with small lattice mismatch are proposed as promising high-performance anode materials for Li, Na, and Mg-ion batteries, exhibiting superior metal conductivities and stronger adsorption properties towards Li, Na, and Mg atoms, thus achieving higher capacities.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Theoretical investigation of Ti2B monolayer as powerful anode material for Li/Na batteries with high storage capacity

Shao-Fei Wang et al.

Summary: The Ti2B monolayer, based on first-principles calculations, shows high capacity and low diffusion barriers compared with other materials, indicating high structural stability and steady metallic character. The magnetic effects in the ground state of ferromagnetism impact thermal stability, charge transfer, ion diffusion, operating voltage and storage capacity.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

2D-VN2 MXene as a novel anode material for Li, Na and K ion batteries: Insights from the first-principles calculations

Yingfeng Dong et al.

Summary: The study demonstrates that 2D-VN2 exhibits high stability and can provide high capacities in Li, Na, and K ion batteries, along with metallic properties and high electrical conductivity, indicating good performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Thermodynamics and kinetics of 2D g-GeC monolayer as an anode materials for Li/Na-ion batteries

Nabil Khossossi et al.

Summary: The development of high capacity anode materials, such as germanium carbide, through rational design using density functional theory, can expedite the discovery of promising materials for next-generation high-performance Li/Na-ion batteries. Germanium carbide exhibits high stability resembling graphene and strong interaction with Li/Na, providing a storage capacity as high as 633 mA h/g. These findings offer valuable insights into the potential of germanium carbide as a promising anode material for (Li/Na)-ion batteries.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Flexible borophosphene monolayer: A potential Dirac anode for high-performance non-lithium ion batteries

He Lin et al.

Summary: Using first principles calculations, the feasibility of borophosphene as a Dirac anode of NLIBs has been evaluated. Results show that borophosphene exhibits excellent conductivity, high adsorption energy, and high specific capacity, making it a potential anode for advanced sodium, potassium, and calcium-ion batteries.

APPLIED SURFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

Two-Dimensional Planar BGe Monolayer as an Anode Material for Sodium-Ion Batteries

Li Shao et al.

Summary: Using first-principles swarm intelligence structure prediction computations, we have explored a fully planar BGe monolayer with unique mechanical and electrical properties. Theoretical calculations show that the free-standing BGe monolayer is highly stable and maintains its metallic feature even after absorbing different numbers of Na atoms, making it a potential candidate for reversible Na-ion battery anode materials with desirable performance. The calculated migration energy barrier, open-circuit voltage, and theoretical specific capacity of the BGe monolayer are also superior to those of some other two-dimensional materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Two-Dimensional Boron-Rich Monolayer BxN as High Capacity for Lithium-Ion Batteries: A First-Principles Study

Xingyi Zhou et al.

Summary: Boron-rich boron nitride BxN materials with increased stability and weakened interactions with the Ag substrate have been discovered, showing great potential as new anode materials for Li-ion batteries. These materials exhibit high mechanical strength, low interfacial bonding with the Ag substrate, excellent cyclability, and improved metallic conductivity upon Li-ion intercalation, highlighting their promising applications in LIBs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Multidisciplinary

Low in-plane atomic density phosphorene anodes for lithium-/sodium-ion batteries

Chunmei Li et al.

Summary: This study systematically investigated a series of phosphorene anodes for lithium/sodium-ion batteries and found that beta-P and gamma-P are good substitutes for alpha-P, with lower in-plane atomic density. Both substitutes show moderate adsorption energy and low diffusion barriers, ensuring high capacity and charging/discharging efficiency. Under strain induction, the transition barriers drop significantly, making the conversion pathways more efficient.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Physical

Modulating a 2D heterointerface with g-C3N4 mesh layers: a suitable hetero-layered architecture for high-power and long-life energy storage

Yunping Wu et al.

Summary: Two-dimensional heterostructures combining different 2D materials show promise for advanced electrode architectures in efficient energy storage devices. Heterointerface conditions greatly influence the electrochemical properties, with mesh-bonded interfaces and porous channels playing a key role in enhancing performance. This study highlights the importance of interface engineering for high-performance energy storage and the potential for advanced heterostructured electrodes in various hybrid devices.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

CuS2 sheets: a hidden anode material with a high capacity for sodium-ion batteries

Shaohua Lu et al.

Summary: A novel two-dimensional phase of copper disulfide (alpha -CuS2) is proposed in this study, showing excellent stability and high sodium storage capacity according to first-principles calculations. The massive synthesis route through mechanical or chemical exfoliation from its bulk counterpart is also proposed. The alpha -CuS2 monolayer is considered a promising anode material for sodium-ion batteries based on the results.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Antiferromagnetic spin ordering in two-dimensional honeycomb lattice of SiP3

Souren Adhikary et al.

Summary: Researchers have discovered a new antiferromagnetic ground state in two-dimensional materials, achieved through elemental substitution to induce Fermi instability, resulting in a unique spin structure in defect-free two-dimensional materials made of only p-block elements.

NANOSCALE ADVANCES (2021)

Article Nanoscience & Nanotechnology

Flexible C6BN Monolayers As Promising Anode Materials for High-Performance K-Ion Batteries

Pan Xiang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Prediction of two-dimensional CP3 as a promising electrode material with a record-high capacity for Na ions

Zishuang Cheng et al.

NANOSCALE ADVANCES (2020)

Article Chemistry, Physical

Uncovering the underlying science behind dimensionality in the potassium battery regime

Zhenjiang Yu et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Two-Dimensional GeP3 as a High Capacity Anode Material for Non-Lithium-Ion Batteries

Xiaoyu Deng et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Nanoscience & Nanotechnology

Excellent Electrolyte Wettability and High Energy Density of B2S as a Two-Dimensional Dirac Anode for Non-Lithium-Ion Batteries

Shufei Lei et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Nanosized MoSe2@Carbon Matrix: A Stable Host Material for the Highly Reversible Storage of Potassium and Aluminum Ions

Zhongchen Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Highly Flexible Hydrogen Boride Monolayers as Potassium-Ion Battery Anodes for Wearable Electronics

Pan Xiang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Metallic P3C monolayer as anode for sodium-ion batteries

Ziyuan Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Materials Science, Multidisciplinary

Density Functional Theory for Battery Materials

Qiu He et al.

ENERGY & ENVIRONMENTAL MATERIALS (2019)

Article Electrochemistry

Adsorption and diffusion on a phosphorene monolayer: a DFT study

A. Sibari et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Article Nanoscience & Nanotechnology

Ultrahigh Storage and Fast Diffusion of Na and K in Blue Phosphorene Anodes

Sankha Mukherjee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Epitaxial Synthesis of Blue Phosphorene

Wei Zhang et al.

Article Chemistry, Physical

Theoretical Prediction of Two-Dimensional SnP3 as a Promising Anode Material for Na-Ion Batteries

Chun-Sheng Liu et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Two-dimensional GeP3 as a high capacity electrode material for Li-ion batteries

Chunmei Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Physical

Structural, elastic, electronic, and optical properties of the tricycle-like phosphorene

Yang Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Multidisciplinary

Epitaxial Growth of Single Layer Blue Phosphorus: A New Phase of Two-Dimensional Phosphorus

Jia Lin Zhang et al.

NANO LETTERS (2016)

Article Chemistry, Physical

Ultrasonically treated liquid interfaces for progress in cleaning and separation processes

Darya Radziuk et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Chemistry, Physical

Theoretical Prediction of Anode Materials in Li-Ion Batteries on Layered Black and Blue Phosphorus

Qing-Fang Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Physical

Exploring the possibilities of two-dimensional transition metal carbides as anode materials for sodium batteries

Eunjeong Yang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Article Chemistry, Physical

Phosphorene as an anode material for Na-ion batteries: a first-principles study

Vadym V. Kulish et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Article Chemistry, Multidisciplinary

Ion Intercalation into Two-Dimensional Transition-Metal Carbides: Global Screening for New High-Capacity Battery Materials

Christopher Eames et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Physics, Multidisciplinary

Semiconducting Layered Blue Phosphorus: A Computational Study

Zhen Zhu et al.

PHYSICAL REVIEW LETTERS (2014)

Article Materials Science, Multidisciplinary

Much stronger binding of metal adatoms to silicene than to graphene: A first-principles study

Xianqing Lin et al.

PHYSICAL REVIEW B (2012)

Article Physics, Multidisciplinary

Silicene: Compelling Experimental Evidence for Graphenelike Two-Dimensional Silicon

Patrick Vogt et al.

PHYSICAL REVIEW LETTERS (2012)

Article Chemistry, Multidisciplinary

Black phosphorus and its composite for lithium rechargeable batteries

Cheol-Min Park et al.

ADVANCED MATERIALS (2007)

Review Chemistry, Physical

Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells

Uday Kasavajjula et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

A climbing image nudged elastic band method for finding saddle points and minimum energy paths

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)