☆ 4.7 Article

Comparison of convergent/divergent ramp on fuel mixing of single jet at supersonic crossflow

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Heat transfer efficiency and electrical performance evaluation of photovoltaic unit under influence of NEPCM

Mohammadjavad Khodadadi et al.

Summary: In this study, the design of a PVT unit with phase change material (PCM) is analyzed to assess its efficiency under different concentrations of nanofluids and non-encapsulated phase change materials (NEPCMs). The effects of flow rates, solar radiation intensities, and multilayers of PCMs are also evaluated. Furthermore, a comparison study is conducted to assess the impact of integrating a thermoelectric (TE) module with the PVT system. The simulation is performed using the enthalpy-porosity approach and a transient solver with a pressure-based finite volume method. The results show that increasing the flow rate of coolant and the concentration of NEPCM can enhance the charging rate but may slightly decrease the temperature.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Review Physics, Multidisciplinary

Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids

Zafar Said et al.

Summary: The rapid development of nanotechnology in the past decade has created numerous opportunities for researchers and engineers. Nanofluids, created by suspending nanoparticles in conventional heat transfer carriers, offer significant advantages in thermal properties. This study addresses the challenge of nanofluid stability and analyzes various forces and physical phenomena affecting the stability. Stable and highly conductive nanofluids can be produced through one-step or two-step production methods, but both methods face the problem of nanoparticle agglomeration.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2022)

添加到收藏夹

Article Engineering, Aerospace

Numerical investigation on mixing improvement mechanism of transverse injection based scramjet combustor

Gautam Choubey et al.

Summary: The research results indicate that the flame holding capacity of a hydrogen-fuelled supersonic combustor is better than an ethylene-fuelled combustor. The introduction of a shock generator can enhance the mixing of fuel with supersonic airflow.

ACTA ASTRONAUTICA (2021)

添加到收藏夹

Article Engineering, Aerospace

Hovering efficiency optimization of the ducted propeller with weight penalty taken into account

Yu Hu et al.

Summary: The ducted propeller is more efficient in hovering but the heavy structure reduces overall system efficiency, prompting a comparison with open propellers when weight penalty is considered. In this scenario, lighter ducted propellers perform better at low disc loading, while those with higher aerodynamic hovering efficiency excel at high disc loading. The optimization process generates an L-shaped Pareto front, indicating designs that balance aerodynamic efficiency and weight reduction.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Aerospace

Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine

Zhao-bo Du et al.

Summary: The study shows that the mixing enhancement mechanism of the cantilevered ramp injector is the shear action in the near flow field and the large-scale vortex structure caused by the cantilevered configuration in the far flow field. This design helps to improve mixing efficiency and reduce total pressure loss.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach

M. Sheikholeslami et al.

Summary: In engineering fields, using tapes with various configurations can improve the efficiency of heat exchangers and address the current challenges of energy demand. Employing helical tapes can increase flow resistance but also enhance heat transfer efficiency and Nusselt number compared to traditional designs. By increasing tape width and Reynolds number, thermal irreversibility can be reduced, leading to improved system efficiency.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Injection of hydrogen sonic multi-jet on inclined surface at supersonic flow

Amin Hassanvand et al.

Summary: The study investigates the effects of multiple hydrogen jets on an inclined surface in supersonic airflow, finding that mixing performance improves at high jet pressure and with increasing angle of the exterior surface. The study also highlights the significant impact of power and slant of the separation shock on the size of the mixing zone.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2021)

添加到收藏夹

Article Mechanics

On-line chatter detection in milling using fast kurtogram and frequency band power

Changfu Liu et al.

Summary: The proposed method uses FK and FBP for online chatter monitoring, verified in mechanical fault diagnosis. By using FK to identify the frequency band with the largest SK, the method then utilizes FBP to monitor chatter.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Influence of Mach Number of Main Flow on Film Cooling Characteristics under Supersonic Condition

Bo Zhang et al.

Summary: The flow and heat transfer characteristics of a film jet inclined to various supersonic situations were numerically studied. The presence of obstacles in supersonic situations led to the generation of complex waves impacting film attachment and the cooling enhancement. Shock waves contributed to the formation of multi-interfacial layered structures and the increase in adhesion of the gas film, resulting in improved film cooling. Additionally, the aerodynamic convergent-divergent state formed in the film hole disrupted the state of supersonic congestion and further enhanced the film cooling effect.

SYMMETRY-BASEL (2021)

添加到收藏夹

Article Acoustics

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

Xinqi Deng et al.

Summary: A dual-frequency confocal ultrasound transducer has been successfully developed in this study, utilizing special composite materials and a confocal structure to address acoustic issues in microvascular imaging. Experimental results demonstrate that this ultrasound transducer is potentially applicable for future medical imaging of microvessels.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: A review

M. Sheikholeslami et al.

Summary: The current review provides empirical and numerical analyses of the thermal performance development in flat plate solar collectors (FPSCs), showing that utilizing nanofluids in PVT and thermal systems can increase both electrical and thermal energy outputs. Studies demonstrate a higher overall performance in FPSCs with the use of nanofluids, highlighting the potential benefits of incorporating nanofluids in solar energy systems.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Energy & Fuels

Prediction of the effects of climate change on hydroelectric generation, electricity demand, and emissions of greenhouse gases under climatic scenarios and optimized ANN model

Li-Na Guo et al.

Summary: This study aims to manage the gap between energy demand and supply by predicting hydropower production, energy demand, and greenhouse gas emissions. The results show a decrease in hydroelectric generation and an increase in energy demand in the future, leading to an increased gap between demand and supply.

ENERGY REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Minimization of energy consumption by building shape optimization using an improved Manta-Ray Foraging Optimization algorithm

Jiaying Feng et al.

Summary: An optimization-simulation technique is applied for optimizing the envelope characteristics of buildings. Improved Manta-Ray Foraging Optimizer is considered as the optimization algorithm, along with RIUSKA for whole-building energy simulation. Buildings with trapezoid and rectangle shapes achieve the lowest life cycle cost under various climatic conditions.

ENERGY REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Optimal long-term prediction of Taiwan's transport energy by convolutional neural network and wildebeest herd optimizer

Shunyu Yao et al.

Summary: An optimized model based on CNN models combined with wildebeest herd optimization algorithm is proposed for transport energy forecasting in Taiwan. The predicted outcomes show that the demand for transport energy in Taiwan is not expected to increase excessively in 2020, while the gross domestic product is expected to increase significantly during the same period. These results align with ROC's green growth strategy, emphasizing the need for CO2 reduction.

ENERGY REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of a new combined energy cycle based on Miller cycle, Organic Rankine cycle, Stirling engine and alkaline fuel cell

Xin Yu et al.

Summary: The use of a combined energy cycle with both conventional and clean energy sources, along with the utilization of waste heat, can enhance power generation efficiency. In this study, a new integrated hybrid energy cycle was introduced, consisting of a Miller cycle engine, alkaline fuel cell, alkaline electrolyzer, Organic Rankine cycle, and Stirling engine. Results showed that the system generated 3.75 kW of electric power, with different components contributing varying percentages to the overall power production.

ENERGY REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Comprehensive evaluation of flat plate and parabolic dish solar collectors' performance using different operating fluids and MWCNT nanofluid in different climatic conditions

Ping Ouyang et al.

Summary: This study comprehensively examines the performance of two solar collector systems in Beijing and Tehran, finding that both systems perform better in Tehran. Additionally, the exergy performance of the solar collector in Tehran is better than in Beijing during months of lower exergy efficiency. The Levelized Cost of Energy varies between the dish collector in Tehran with water and the flat plate collector in Beijing with Dowtherm Q, with significant differences when using alternative working fluids like MWCNT nanofluid.

ENERGY REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Life cycle cost and life cycle energy in zero-energy building by multi-objective optimization

Chen She et al.

Summary: A new global multiple-objective optimization method combined with a comprehensive assessment method is used in this study for zero-energy building design. By optimizing the energy systems of buildings and considering factors such as solar energy utilization efficiency, economic, and social aspects, the best solution is presented for practical building design guidance.

ENERGY REPORTS (2021)

添加到收藏夹

Article Mathematics, Applied

A new generalization of some quantum integral inequalities for quantum differentiable convex functions

Yi-Xia Li et al.

Summary: In this paper, a new quantum integral identity is proposed, which is then used to derive new estimates of Hermite-Hadamard inequalities for quantum integrals. The results presented in this paper generalize comparable results in the literature on Hermite-Hadamard inequalities and obtain several inequalities as special cases of the main results.

ADVANCES IN DIFFERENCE EQUATIONS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating

Jilin Xie et al.

Summary: Ultrasonic spot welding of dissimilar Ti6Al4V and TiNi SMA joints with an Al coating interlayer was investigated, showing successful joining can be achieved by selecting proper welding pressure. Intermetallic compounds were formed in the joints, and the tensile shear loads varied with welding pressure.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Aerospace

Influence of trapezoidal lobe strut on fuel mixing and combustion in supersonic combustion chamber

Yu Jiang et al.

Summary: This article investigates the fuel injection system in supersonic vehicles, focusing on the use of a trapezoidal strut injector to enhance fuel mixing. The strength of vortices is influenced by injector velocity and free stream conditions, with the results showing an 18% improvement in fuel mixing when using a trapezoidal strut injector.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Techno-Economic Planning and Operation of the Microgrid Considering Real-Time Pricing Demand Response Program

Zi-Xuan Yu et al.

Summary: The study optimizes the grid-connected microgrids (MGs) by introducing real-time pricing (RTP) and demand response (DR) program, finding that the DR program has a positive impact on the technical, economic, and environmental aspects of MG, leading to a reduction in NPC and COE, component size, and carbon emissions.

ENERGIES (2021)

添加到收藏夹

Review Automation & Control Systems

Circulating purification of cutting fluid: an overview

Xifeng Wu et al.

Summary: This study clarifies key scientific issues in the research achievements of eco-friendly cutting fluid and waste fluid treatment, providing scientific technical guidance for actual production. It summarizes the preparation and mechanism of organic additives, analyzes the influence of vegetable base oils on lubricating properties, and evaluates the process characteristics of cutting fluid reduction supply methods. Additionally, it outlines the treatment of oil mist and miscellaneous oil, the removal mechanism of microorganisms, and the design principles of integrated recycling equipment.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Mathematics

FUNCTIONAL INEQUALITIES FOR GAUSSIAN HYPERGEOMETRIC FUNCTION AND GENERALIZED ELLIPTIC INTEGRAL OF THE FIRST KIND

Shen-Yang Tan et al.

Summary: The article introduces several new functional inequalities for the Gaussian hypergeometric function and generalized elliptic integral of the first kind.

MATHEMATICA SLOVACA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Lead halide perovskite for efficient optoacoustic conversion and application toward high-resolution ultrasound imaging

Xinyuan Du et al.

Summary: Lead halide perovskites have shown promising applications in optoacoustic transducers with improved thermal properties and high performance. By optimizing the thermal properties of perovskites, the researchers achieved record values for bandwidth and conversion efficiency in optoacoustic transducers.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Mathematics

Refinements of quantum Hermite-Hadamard- type inequalities

Huseyin Budak et al.

Summary: This paper discusses new quantum Hermite-Hadamard-type inequalities for a newly defined quantum integral and several refinements of quantum Hermite-Hadamard inequalities.

OPEN MATHEMATICS (2021)

添加到收藏夹

Article Mathematics, Applied

MONOTONICITY, CONVEXITY AND BOUNDS INVOLVING THE BETA AND RAMANUJAN R-FUNCTIONS

Ti-Ren Huang et al.

Summary: The article presents new asymptotical sharp bounds by analyzing combinations involving polynomials, Beta functions, and Ramanujan R-functions.

JOURNAL OF MATHEMATICAL INEQUALITIES (2021)

添加到收藏夹

Article Mathematics, Applied

CONCAVITY AND BOUNDS INVOLVING GENERALIZED ELLIPTIC INTEGRAL OF THE FIRST KIND

Tie-Hong Zhao et al.

Summary: The article provides a sufficient condition for a function to be strictly concave, generalizing recent results. New bounds are also presented for the function.

JOURNAL OF MATHEMATICAL INEQUALITIES (2021)

添加到收藏夹

Article Mathematics

Quantum Ostrowski-type inequalities for twice quantum differentiable functions in quantum calculus

Muhammad Aamir Ali et al.

Summary: In this paper, an identity for twice quantum differentiable functions is proven. By utilizing the convexity of vertical bar(b)D(q)(2)f vertical bar and vertical bar(a)D(q)(2)f vertical bar, some quantum Ostrowski inequalities for twice quantum differentiable mappings involving q(a) and q(b)-quantum integrals are established. These results are a generalization of already published ones.

OPEN MATHEMATICS (2021)

添加到收藏夹

Article Mathematics, Applied

Sharp Bounds for the Weighted Holder Mean of the Zero-Balanced Generalized Complete Elliptic Integrals

Tie-Hong Zhao et al.

Summary: The article presents the best bounds for the weighted Holder mean of zero-balanced generalized complete elliptic integrals, extending previous results for complete p-elliptic integrals.

COMPUTATIONAL METHODS AND FUNCTION THEORY (2021)

添加到收藏夹

Article Engineering, Aerospace

The influence of the wedge shock generator on the vortex structure within the trapezoidal cavity at supersonic flow

Zhixiong Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Aerospace

The influence of the sinusoidal shock generator on the mixing rate of multi hydrogen jets at supersonic flow

Yicheng Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Numerical simulation of mixing of hydrogen jet at supersonic cross flow in presence of upstream wavy wall

Tran Dinh Manh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Computational investigation of multi-cavity fuel injection on hydrogen mixing at supersonic combustion chamber

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Computational study of the cavity flow over sharp nose cone in supersonic flow

F. Pish et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2020)

添加到收藏夹

Review Chemistry, Physical

Hydrogen fuel in scramjet engines - A brief review

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Mixing enhancement of the multi hydrogen fuel jets by the backward step

Yeping Peng et al.

ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

Recent research progress on transverse injection technique for scramjet applications-a brief review

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of upstream strut on hydrogen fuel distribution inside the supersonic combustion chamber

Yu Jiang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Engineering, Aerospace

Mixing enhancement of multi hydrogen jets through the cavity flameholder with extended pylon

Zhixiong Li et al.

ACTA ASTRONAUTICA (2020)

添加到收藏夹

Article Engineering, Aerospace

Influence of backward-facing step on the mixing efficiency of multi microjets at supersonic flow

Zhixiong Li et al.

ACTA ASTRONAUTICA (2020)

添加到收藏夹

Article Engineering, Aerospace

Effect of inclined block on fuel mixing of multi hydrogen jets in scramjet engine

Zhixiong Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Annulus shape tank with convective flow in a porous zone with impose of MHD

Yu-Ming Chu et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2020)

添加到收藏夹

Article Mathematics

SHARP BOUNDS FOR THE TOADER MEAN OF ORDER 3 IN TERMS OF ARITHMETIC, QUADRATIC AND CONTRAHARMONIC MEANS

Hong-Hu Chu et al.

MATHEMATICA SLOVACA (2020)

添加到收藏夹

Article Mathematics, Applied

New fractional approaches for n-polynomial P-convexity with applications in special function theory

Shu-Bo Chen et al.

ADVANCES IN DIFFERENCE EQUATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Mathematics, Applied

Integral inequalities via Raina's fractional integrals operator with respect to a monotone function

Shu-Bo Chen et al.

ADVANCES IN DIFFERENCE EQUATIONS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Application of TiO2 nanoparticle for solar photocatalytic oxidation system

Yu-Ming Chu et al.

APPLIED NANOSCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Water-based nanofluid flow with various shapes of Al2O3 nanoparticles owing to MHD inside a permeable tank with heat transfer

Yu-Ming Chu et al.

APPLIED NANOSCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simulation based on FVM for influence of nanoparticles on flow inside a pipe enhanced with helical tapes

Yu-Ming Chu et al.

APPLIED NANOSCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Investigation of nano powders influence on melting process within a storage unit

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Drop breakup in a symmetric T-junction microchannel under electric field

Iman Jafari et al.

MICROFLUIDICS AND NANOFLUIDICS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Application of nanomaterial for thermal unit including tube fitted with turbulator

Yu-Ming Chu et al.

APPLIED NANOSCIENCE (2020)

添加到收藏夹

Article Mathematics, Applied

A new approach on fractional calculus and probability density function

Shu-Bo Chen et al.

AIMS MATHEMATICS (2020)

添加到收藏夹

Article Mathematics, Applied

On some refinements for inequalities involving zero-balanced hypergeometric function

Tie-Hong Zhao et al.

AIMS MATHEMATICS (2020)

添加到收藏夹

Article Mathematics, Applied

A sharp double inequality involving generalized complete elliptic integral of the first kind

Tie-Hong Zhao et al.

AIMS MATHEMATICS (2020)

添加到收藏夹

Review Chemistry, Physical

Recent advances in cavity-based scramjet engine- a brief review

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Injection of multi hydrogen jets within cavity flameholder at supersonic flow

Amirhossein Edalatpour et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of fuel jet arrangement on the mixing rate inside trapezoidal cavity flame holder at supersonic flow

Sunwen Du et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

The optimization via response surface method for micro hydrogen gas actuator

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Engineering, Aerospace

Influence of the secondary flow control on the transverse gaseous injection flow field properties in a supersonic flow

Min-zhou Dong et al.

ACTA ASTRONAUTICA (2019)

添加到收藏夹

Article Engineering, Aerospace

The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow

Keivan Fallah et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Drop formation of ferrofluid at co-flowing microcahnnel under uniform magnetic field

Atena Ghaderi et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2018)

添加到收藏夹

Article Chemistry, Physical

Shape effect of cavity flameholder on mixing zone of hydrogen jet at supersonic flow

Rasoul Moradi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Physics, Applied

Optical properties of quasi-type-II structure in GaAs/GaAsSb/GaAs coaxial single quantum-well nanowires

Haolin Li et al.

APPLIED PHYSICS LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Lattice Boltzmann simulation of drop formation in T-junction microchannel

Keivan Fallah et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

添加到收藏夹

Article Thermodynamics

Taguchi Optimization Approach for Three-Dimensional Nanofluid Natural Convection in a Transformable Enclosure

Javad Alinejad et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2017)

添加到收藏夹

Article Engineering, Aerospace

Mixing augmentation of transverse hydrogen jet by injection of micro air jets in supersonic crossflow

A. Anazadehsayed et al.

ACTA ASTRONAUTICA (2017)

添加到收藏夹

Article Engineering, Aerospace

Characteristics of transverse hydrogen jet in presence of multi air jets within scramjet combustor

M. Barzegar Gerdroodbary et al.

ACTA ASTRONAUTICA (2017)

添加到收藏夹

Article Chemistry, Physical

Effect of variation of angle of attack on the performance of two-strut scramjet combustor

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Investigation on the effects of operating variables on the performance of two-strut scramjet combustor

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Optimal control of batch cooling crystallizers by using genetic algorithm

Younes Amini et al.

CASE STUDIES IN THERMAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Aerospace

Supersonic Combustion and Flame Stabilization of Coflow Ethylene and Air with Splitter Plate

Liwei Zhang et al.

JOURNAL OF PROPULSION AND POWER (2015)

添加到收藏夹

Article Engineering, Aerospace

Behavior of Multiple-Jet Interactions in a Hypersonic Boundary Layer

Adrian S. Pudsey et al.

JOURNAL OF PROPULSION AND POWER (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Theoretical investigation of micropolar fluid flow between two porous disks

P. Valipour et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2015)

添加到收藏夹

Article Construction & Building Technology

Control Force Characteristics of Different Control Strategies for the Wind-Excited 76-Story Benchmark Building Structure

Chunwei Zhang

ADVANCES IN STRUCTURAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Effects of dual jets distance on mixing characteristics and flow path within a cavity in supersonic crossflow

Takahiro Ukai et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2014)

添加到收藏夹

Article Mechanics

Numerical analysis on cooling performance of counterflowing jet over aerodisked blunt body

M. Barzegar Gerdroodbary

SHOCK WAVES (2014)

添加到收藏夹

Article Materials Science, Textiles

Laser Treatment of the Wool Fabric for Felting Shrinkage Control

Shirin Nourbakhsh et al.

FIBERS AND POLYMERS (2011)

添加到收藏夹

Article Engineering, Aerospace

Numerical simulation of hypersonic flow over highly blunted cones with spike

M. Barzegar Gerdroodbary et al.

ACTA ASTRONAUTICA (2010)

添加到收藏夹

Article Engineering, Aerospace

Numerical Investigation of Transverse Jets Through Multiport Injector Arrays in Supersonic Crossflow

Adrian S. Pudsey et al.

JOURNAL OF PROPULSION AND POWER (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.