4.8 Review

Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

Graded 2D/3D (CF3-PEA)2FA0.85MA0.15Pb2I7/FA0.85MA0.15PbI3 heterojunction for stable perovskite solar cell with an efficiency over 23.0%

Yuan Cai et al.

Summary: By replacing small cations with bulkier organic cations containing long alkyl chains or benzene rings to form a thin two-dimensional passivation layer on three-dimensional perovskite, the efficiency and stability of perovskite solar cells can be significantly improved. The unique structure and properties of the 2D layer create better chemical and thermal stability, leading to enhanced efficiency and durability of the PSCs.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Nanoscience & Nanotechnology

Direct Surface Passivation of Perovskite Film by 4-Fluorophenethylammonium Iodide toward Stable and Efficient Perovskite Solar Cells

Xiongzhuo Jiang et al.

Summary: Passivating the perovskite layer with organic halide salts directly can reduce film defects and enhance charge transport efficiency, leading to improved device performance and stability. The strategy effectively suppresses nonradiative recombination and reduces recombination losses, resulting in higher device efficiency and good ambient stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Efficient Passivation Strategy on Sn Related Defects for High Performance All-Inorganic CsSnI3 Perovskite Solar Cells

Bo Li et al.

Summary: This study utilized a thioamides passivation strategy to modulate defect state density at surfaces and grain boundaries in CsSnI3 perovskites, achieving high-performance all-inorganic CsSnI3 PSCs. Surface passivation reduced deep level trap state defect density originating from Sn2+ ion and Sn2+ oxidation, restraining nonradiative recombination and elongating carrier lifetime.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Modifying Surface Termination of CsPbI3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics

Tiantian Liu et al.

Summary: In order to improve the performance of all-inorganic perovskite solar cells, an ultra-thin 2D perovskite is used to terminate CsPbI3 grain boundaries, enhancing charge-carrier extraction and transport while effectively suppressing nonradiative recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Silicon-Based Electrodes: From Fundamental Research toward Practical Applications

Mingzheng Ge et al.

Summary: This article presents the latest developments in the rational design of Si-based electrodes and their potential applications, while discussing the challenges and potential solutions. Si-based anode materials will play a key role in meeting the demands for higher energy density in the coming decades.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Efficient and stable perovskite solar cells via surface passivation of an ultrathin hydrophobic organic molecular layer

Jing Li et al.

Summary: The use of TFMBA to form an ultrathin organic molecular layer on the surface of perovskites effectively passivates interfacial imperfections, leading to improved power conversion efficiency and preventing moisture penetration, thus prolonging the stability of PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Review Chemistry, Multidisciplinary

2D Hybrid Halide Perovskites: Structure, Properties, and Applications in Solar Cells

Guangbao Wu et al.

Summary: 2D metal-halide perovskites have garnered intense research interest due to their unique layer structure and superior stability, particularly in terms of optoelectronic properties. Recent studies have demonstrated the remarkable performance and potential of these materials in solar cells.
Article Multidisciplinary Sciences

Interfacial stabilization for inverted perovskite solar cells with long-term stability

Wei Chen et al.

Summary: The study demonstrates a new interfacial management strategy to effectively suppress the performance degradation of perovskite solar cells. The results indicate that using this strategy can achieve higher efficiency and longer lifetime.

SCIENCE BULLETIN (2021)

Article Chemistry, Physical

Comprehensive passivation strategy for achieving inverted perovskite solar cells with efficiency exceeding 23% by trap passivation and ion constraint

Fan Zhang et al.

Summary: The study demonstrates a comprehensive passivation strategy for achieving high-performance inverted PSCs by reducing trap density at interfaces and grain boundaries of the perovskite active layer. The unencapsulated PSCs from this passivation strategy achieved the highest power conversion efficiency of 23.33% with remarkable long-term stability under illumination and humidity. The work also presents an original method using C-V and DLCP measurements to analyze trap density distribution and ion accumulation density at interfaces of PSCs.

NANO ENERGY (2021)

Article Chemistry, Physical

Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture

Bowen Yang et al.

Summary: The use of cyclohexylethylammonium iodide (CEAI) as an interface material successfully improved the fill factor and power conversion efficiency of perovskite solar cells. This was achieved through the formation of a 2D perovskite interlayer, which reduced trap-assisted recombination and enhanced surface hydrophobicity for outstanding stability.

ACS ENERGY LETTERS (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Engineering, Electrical & Electronic

Research progress of absorber film of inorganic perovskite solar cells: Fabrication techniques and additive engineering in defect passivation

Siqi Han et al.

Summary: This paper explores the defects of inorganic perovskite films, analyzes the impact of preparation techniques on crystallization, discusses passivation strategies for surface defects, and summarizes interface engineering for inorganic perovskite films. Future research focuses on inorganic perovskite solar cells are also discussed.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Article Chemistry, Physical

Efficient and Stable 2D@3D/2D Perovskite Solar Cells Based on Dual Optimization of Grain Boundary and Interface

Guodong Li et al.

Summary: The development of perovskite solar cells has been faster than other photovoltaic cells, but their practical application is limited by performance and stability issues. A strategy involving 2-PyEA molecules has been designed to enhance the efficiency and stability of perovskite cells, achieving a maximum power conversion efficiency of 23.2% in experiments.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

A penetrated 2D/3D hybrid heterojunction for high-performance perovskite solar cells

Jianguo Sun et al.

Summary: A penetrated 2D/3D heterojunction strategy was developed to stabilize the crystal structure and improve the efficiency of organic-inorganic hybrid lead halide perovskite solar cells. By using organic halides like dimethylammonium iodide, a significant enhancement in performance was achieved. After 1000 hours of aging in air, the device with the 2D/3D heterojunction retained 80% of its initial efficiency, demonstrating superior stability compared to the control device.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

High-efficiency of 15.47% for two-dimensional perovskite solar cells processed by blade coating with non-thermal assistance

Guangbao Wu et al.

Summary: The study focuses on fabricating high-efficiency quasi-2D perovskite solar cells using non-thermal assistance blade-coating processing, achieving high-quality perovskite films with lower defects. This method allows for the formation of crystalline 2D perovskite with enhanced reproducibility and performance, showcasing potential for large-scale manufacturing in commercial PSCs.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Materials Science, Multidisciplinary

One-key-resetrecycling of whole perovskite solar cell

Kai Wang et al.

Summary: Material recycling from used perovskite solar cells for remaking new devices has been inefficient, but a bleacher solution is shown to disassemble cells into collectable parts with high material reuse rate. The remade device using recycled materials exhibits minimal efficiency drop, indicating a promising high-efficiency recycle-remake strategy for extending the life cycle of perovskite photovoltaics.

MATTER (2021)

Article Materials Science, Multidisciplinary

Unraveling the surface state of photovoltaic perovskite thin film

Rui Wang et al.

Summary: Efficient perovskite optoelectronic devices utilize effective surface passivation strategies to regulate device performance, with recent studies showing that surface states play a crucial role. In mixed-cation perovskite films, a nonuniform distribution of cations leads to unique surface defect energetics, with FA cations near the top and MA cations near the bottom. By studying the surface defects, it was found that antisite FA(I) acts as a dominant deep trap, resulting in a low surface recombination velocity of 20 cm/s in FA-based perovskite photovoltaic devices.

MATTER (2021)

Article Materials Science, Multidisciplinary

Small grains as recombination hot spots in perovskite solar cells

Qingzhi An et al.

Summary: Studies find that recombination at grain boundaries is diffusion limited and inversely proportional to the grain area to the power of 3/2. The prevalence of small grains, which act as recombination hot spots, dictates the photovoltaic performance of perovskite solar cells.

MATTER (2021)

Article Materials Science, Multidisciplinary

Molecular Engineering for Two-Dimensional Perovskites with Photovoltaic Efficiency Exceeding 18%

Guangbao Wu et al.

Summary: The study presents a strategy utilizing molecular van der Waals interaction to modify crystallization, phase distribution, and quantum-confined behaviors in 2D perovskites. With the optimal amylamine (AA) spacer, a champion PCE of 18.42% has been achieved.

MATTER (2021)

Article Chemistry, Physical

Deep surface passivation for efficient and hydrophobic perovskite solar cells

Junmin Xia et al.

Summary: The introduction of hydrophobic 3-(trifluoromethyl) phenethylamine hydroiodide (CF(3)PEAI) passivation agent on perovskite films enhances the performance and stability of perovskite solar cells. CF(3)PEAI forms a 2D perovskite structure, penetrates deep into the films, passivates internal defects, and improves long-term stability. This passivated perovskite film exhibits better energy level alignment, longer carrier lifetimes, and higher stability, leading to an increase in solar cell performance and retention of initial performance under ambient air conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

Unraveling the Impact of Halide Mixing on Crystallization and Phase Evolution in CsPbX3 Perovskite Solar Cells

Junjie Ma et al.

Summary: This study systematically investigates the role of halide elements in the crystallization kinetics, phase-transition, and stabilization mechanism of all-inorganic perovskites. By precise compositional engineering, high-performance ternary halide (I, Br, Cl) all-inorganic PSCs were successfully fabricated. These results provide guidance for a comprehensive understanding of all-inorganic perovskite materials and pave the way for achieving high-performance all-inorganic PSCs.

MATTER (2021)

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Physical

New Strategies for Defect Passivation in High-Efficiency Perovskite Solar Cells

Seckin Akin et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

Facile Formation of 2D-3D Heterojunctions on Perovskite Thin Film Surfaces for Efficient Solar Cells

Qingquan He et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Double-Sided Surface Passivation of 3D Perovskite Film for High-Efficiency Mixed-Dimensional Perovskite Solar Cells

Md Arafat Mahmud et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency

Hongwei Zhu et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

Strain engineering and epitaxial stabilization of halide perovskites

Yimu Chen et al.

NATURE (2020)

Article Chemistry, Physical

Highly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation

Zhifang Wu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Toward Understanding Space-Charge Limited Current Measurements on Metal Halide Perovskites

Elisabeth A. Duijnstee et al.

ACS ENERGY LETTERS (2020)

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

Article Chemistry, Multidisciplinary

Stable Quasi-2D Perovskite Solar Cells with Efficiency over 18% Enabled by Heat-Light Co-Treatment

Xiaomei Lian et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

Dimensional Mixing Increases the Efficiency of 2D/3D Perovskite Solar Cells

Sam Teale et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Review Chemistry, Physical

Crystallization Kinetics in 2D Perovskite Solar Cells

Youkui Xu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Dion-Jacobson 2D-3D perovskite solar cells with improved efficiency and stability

Xiaoqing Jiang et al.

NANO ENERGY (2020)

Article Chemistry, Physical

Sn Perovskite Solar Cells via 2D/3D Bilayer Formation through a Sequential Vapor Process

Won-Gyu Choi et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Multidisciplinary

Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency

Fengzhu Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Article Chemistry, Physical

Orientationally engineered 2D/3D perovskite for high efficiency solar cells

Muhammad Sohail Abbas et al.

SUSTAINABLE ENERGY & FUELS (2020)

Article Chemistry, Physical

Dynamical evolution of the 2D/3D interface: a hidden driver behind perovskite solar cell instability

Albertus A. Sutanto et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Multidisciplinary

Advances in two-dimensional organic-inorganic hybrid perovskites

Fei Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Two-Dimensional Halide Perovskites in Solar Cells: 2D or not 2D?

Carmen Ortiz-Cervantes et al.

CHEMSUSCHEM (2019)

Article Chemistry, Physical

Complexities of Contact Potential Difference Measurements on Metal Halide Perovskite Surfaces

Fengyu Zhang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Nanoscience & Nanotechnology

Highly efficient and stable 2D 3D perovskite solar cells fabricated by interfacial modification

Yuqin Zou et al.

NANOTECHNOLOGY (2019)

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Editorial Material Multidisciplinary Sciences

A redox shuttle imparts operational durability to perovskite solar cells

Yabing Qi

SCIENCE BULLETIN (2019)

Review Chemistry, Multidisciplinary

Defect and Contact Passivation for Perovskite Solar Cells

Erkan Aydin et al.

ADVANCED MATERIALS (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Materials Science, Multidisciplinary

Age-induced recrystallization in perovskite solar cells

Chengbin Fei et al.

ORGANIC ELECTRONICS (2019)

Article Chemistry, Physical

Record Open-Circuit Voltage Wide-Bandgap Perovskite Solar Cells Utilizing 2D/3D Perovskite Heterostructure

Saba Gharibzadeh et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Quantum Well Energetics of an n=2 Ruddlesden-Popper Phase Perovskite

Scott Silver et al.

ADVANCED ENERGY MATERIALS (2019)

Article Multidisciplinary Sciences

Ultrafast long-range spin-funneling in solution-processed Ruddlesden-Popper halide perovskites

David Giovanni et al.

NATURE COMMUNICATIONS (2019)

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Physical

Suppressed Ion Migration in Reduced-Dimensional Perovskites Improves Operating Stability

Ziru Huang et al.

ACS ENERGY LETTERS (2019)

Article Multidisciplinary Sciences

Carrier-resolved photo-Hall effect

Oki Gunawan et al.

NATURE (2019)

Review Chemistry, Multidisciplinary

Mixed Dimensional 2D/3D Hybrid Perovskite Absorbers: The Future of Perovskite Solar Cells?

Anurag Krishna et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Physical

Vacuum-Deposited 2D/3D Perovskite Heterojunctions

Maria-Grazia La-Placa et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Materials Science, Multidisciplinary

High-performance and moisture-stable perovskite solar cells with a 2D modified layer via introducing a high dipole moment cation

Huifen Xu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Physical

Polymer Doping for High-Efficiency Perovskite Solar Cells with Improved Moisture Stability

Jiexuan Jiang et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells

Wangen Zhao et al.

ADVANCED SCIENCE (2018)

Article Chemistry, Multidisciplinary

Efficient and Ambient-Air-Stable Solar Cell with Highly Oriented 2D@3D Perovskites

Tao Ye et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

A Self-Powered and Flexible Organometallic Halide Perovskite Photodetector with Very High Detectivity

Siu-Fung Leung et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Ultrahigh-Performance Self-Powered Flexible Double-Twisted Fibrous Broadband Perovskite Photodetector

Haoxuan Sun et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

2D Perovskites with Short Interlayer Distance for High-Performance Solar Cell Application

Chunqing Ma et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation

Tianqi Niu et al.

ADVANCED MATERIALS (2018)

Review Materials Science, Multidisciplinary

The Diversity of Layered Halide Perovskites

Matthew D. Smith et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 48 (2018)

Article Chemistry, Physical

Unraveling the Growth of Hierarchical Quasi-2D/3D Perovskite and Carrier Dynamics

Liang Li et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Chemistry, Physical

Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures

Yun Lin et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Chemistry, Multidisciplinary

All-Inorganic CsPbI2Br Perovskite Solar Cells with High Efficiency Exceeding 13%

Chong Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Dae-Yong Son et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Multidisciplinary Sciences

Enhanced photovoltage for inverted planar heterojunction perovskite solar cells

Deying Luo et al.

SCIENCE (2018)

Article Energy & Fuels

Post-treatment of perovskite film with phenylalkylammonium iodide for hysteresis-less perovskite solar cells

Hyun-Seok Yoo et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Multidisciplinary Sciences

Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells

Wu-Qiang Wu et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Scaling law for excitons in 2D perovskite quantum wells

J. -C. Blancon et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes

Wei Zou et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Physical

Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics

Teck Ming Koh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Review Materials Science, Multidisciplinary

Two-dimensional organic-inorganic hybrid perovskite: from material properties to device applications

Shuang Ma et al.

SCIENCE CHINA-MATERIALS (2018)

Article Chemistry, Physical

Suppressed Ion Migration along the In-Plane Direction in Layered Perovskites

Xun Xiao et al.

ACS ENERGY LETTERS (2018)

Review Chemistry, Inorganic & Nuclear

Synergistic combination of semiconductor quantum dots and organic-inorganic halide perovskites for hybrid solar cells

Ru Zhou et al.

COORDINATION CHEMISTRY REVIEWS (2018)

Article Chemistry, Multidisciplinary

Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics

Yong Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Materials Science, Multidisciplinary

High open-circuit voltage in perovskite solar cells: The role of hole transport layer

David Ompong et al.

ORGANIC ELECTRONICS (2018)

Article Chemistry, Multidisciplinary

Phase Pure 2D Perovskite for High-Performance 2D-3D Heterostructured Perovskite Solar Cells

Pengwei Li et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Design Principles for Trap-Free CsPbX3 Nanocrystals: Enumerating and Eliminating Surface Halide Vacancies with Softer Lewis Bases

David P. Nenon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

A Direct Bandgap Copper-Antimony Halide Perovskite

Brenda Vargas et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Observation of Internal Photoinduced Electron and Hole Separation in Hybrid Two-Dimentional Perovskite Films

Junxue Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Multidisciplinary Sciences

One-Year stable perovskite solar cells by 2D/3D interface engineering

G. Grancini et al.

NATURE COMMUNICATIONS (2017)

Article Multidisciplinary Sciences

Transcending the slow bimolecular recombination in lead-halide perovskites for electroluminescence

Guichuan Xing et al.

NATURE COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Enhanced Moisture Stability of Cesium-Containing Compositional Perovskites by a Feasible Interfacial Engineering

Nan Li et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Chemistry, Physical

Suppressed Ion Migration in Low-Dimensional Perovskites

Yun Lin et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Physical

Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells

Yanqiang Hu et al.

ACS ENERGY LETTERS (2017)

Review Chemistry, Multidisciplinary

Theoretical Treatment of CH3NH3PbI3 Perovskite Solar Cells

Sining Yun et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

Low-Dimensional Organic-Inorganic Halide Perovskite: Structure, Properties, and Applications

Ravi K. Misra et al.

CHEMSUSCHEM (2017)

Article Energy & Fuels

Optical Properties and Modeling of 2D Perovskite Solar Cells

Bin Liu et al.

SOLAR RRL (2017)

Article Chemistry, Multidisciplinary

Hybrid Perovskite/Perovskite Heterojunction Solar Cells

Yinghong Hu et al.

ACS NANO (2016)

Article Chemistry, Multidisciplinary

A Self-Powered and Stable All-Perovskite Photodetector-Solar Cell Nanosystem

Hao Lu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Enhanced Charge Collection with Passivation Layers in Perovskite Solar Cells

Yong Hui Lee et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Ion-Exchange-Induced 2D-3D Conversion of HMA1-xFAxPbI3Cl Perovskite into a High-Quality MA1-xFAxPbI3 Perovskite

Ge Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Review Chemistry, Multidisciplinary

Intriguing Optoelectronic Properties of Metal Halide Perovskites

Joseph S. Manser et al.

CHEMICAL REVIEWS (2016)

Review Chemistry, Multidisciplinary

Organic-Inorganic Perovskites: Structural Versatility for Functional Materials Design

Bayrammurad Saparov et al.

CHEMICAL REVIEWS (2016)

Article Chemistry, Multidisciplinary

Grain boundary dominated ion migration in polycrystalline organic-inorganic halide perovskite films

Yuchuan Shao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Light-induced annihilation of Frenkel defects in organo-lead halide perovskites

Edoardo Mosconi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Article Nanoscience & Nanotechnology

Perovskite energy funnels for efficient light-emitting diodes

Mingjian Yuan et al.

NATURE NANOTECHNOLOGY (2016)

Article Chemistry, Physical

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?

Fangzhou Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Article Nanoscience & Nanotechnology

Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation

Insung Hwang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Trap-Assisted Non-Radiative Recombination in Organic-Inorganic Perovskite Solar Cells

Gert-Jan A. H. Wetzelaer et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Physical

Organic-inorganic lead halide peroyskite solar cell materials: A possible stability problem

J. Schoonman

CHEMICAL PHYSICS LETTERS (2015)

Article Chemistry, Physical

Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells

Sonia R. Raga et al.

CHEMISTRY OF MATERIALS (2015)

Article Chemistry, Multidisciplinary

Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation

Jon M. Azpiroz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Materials Science, Multidisciplinary

Perovskite solar cells: an emerging photovoltaic technology

Nam-Gyu Park

MATERIALS TODAY (2015)

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Article Multidisciplinary Sciences

Impact of microstructure on local carrier lifetime in perovskite solar cells

Dane W. deQuilettes et al.

SCIENCE (2015)

Article Multidisciplinary Sciences

Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese

Jixian Xu et al.

NATURE COMMUNICATIONS (2015)

Article Multidisciplinary Sciences

Ionic transport in hybrid lead iodide perovskite solar cells

Christopher Eames et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell

Jin-Wook Lee et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Multidisciplinary

A Layered Hybrid Perovskite Solar-Cell Absorber with Enhanced Moisture Stability

Ian C. Smith et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Physics, Applied

Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber

Wan-Jian Yin et al.

APPLIED PHYSICS LETTERS (2014)

Article Chemistry, Multidisciplinary

Charge-carrier dynamics in vapour-deposited films of the organolead halide perovskite CH3NH3PbI3-xClx

Christian Wehrenfennig et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

Supramolecular Halogen Bond Passivation of Organic-Inorganic Halide Perovskite Solar Cells

Antonio Abate et al.

NANO LETTERS (2014)

Article Multidisciplinary Sciences

Interface engineering of highly efficient perovskite solar cells

Huanping Zhou et al.

SCIENCE (2014)

Article Nanoscience & Nanotechnology

Auger Recombination in GaAs from First Principles

Daniel Steiauf et al.

ACS PHOTONICS (2014)

Article Nanoscience & Nanotechnology

Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?

Duyen H. Cao et al.

APL MATERIALS (2014)

Article Multidisciplinary Sciences

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Julian Burschka et al.

NATURE (2013)