相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Anodizing of AS12 alloy in alkaline media
Anas Ben Romdhane et al.
APPLIED SURFACE SCIENCE (2022)
Nickel-free sealing technology for anodic oxidation film of aluminum alloy at room temperature
Xue-Long Hao et al.
RARE METALS (2021)
A new perspective on pore growth in anodic alumina films
Sachiko Ono et al.
ELECTROCHEMISTRY COMMUNICATIONS (2021)
Influence of Fe-rich intermetallics and their segregation on anodising properties of Al-Si-Mg rheocast alloys
Baiwei Zhu et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Improvement of the Functional Characteristics of Coatings Obtained By the Method of Hard Anodizing of Aluminum Alloys
M. M. Student et al.
MATERIALS SCIENCE (2021)
Anodisation of aluminium alloy AA7075-Influence of intermetallic particles on anodic oxide growth
Fan Zhang et al.
CORROSION SCIENCE (2020)
Improvement in the abrasive wear resistance of an aluminum alloy casting for a continuously-variable transmission using heat treatment and pulsed anodizing
Ming-Hung Chiang et al.
WEAR (2020)
Studies on the corrosion performance of an effective and novel sealing anodic oxide coating
Shanwen Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
THE EFFECT OF ELECTROLYTE TEMPERATURE AND SEALING SOLUTION IN ANODIZING OPERATION ON HARDNESS AND WEAR BEHAVIOR OF 7075-T6 ALUMINUM ALLOY
Saeed Niyazbakhsh et al.
SURFACE REVIEW AND LETTERS (2019)
Aluminum anodizing waste and its uses: An overview of potential applications and market opportunities
Marcelo Tramontin Souza et al.
WASTE MANAGEMENT (2019)
Hardness and corrosion behaviour of anodised Al-Si produced by rheocasting
Baiwei Zhu et al.
MATERIALS & DESIGN (2019)
Silicon Addition Influence on Properties of Anodised Al-Si Alloy Surface
K. Labisz et al.
ACTA PHYSICA POLONICA A (2019)
Anodizing parameters for superheated slurry cast 7075 aluminum alloys
Itsaree Iewkitthayakorn et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Effect of Iron-Containing Intermetallic Particles on Film Structure and Corrosion Resistance of Anodized AA2099 Alloy
H. Wu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Microstructural and tribological investigations of diecast and hard anodized AlSiCu alloys
Daniele Caliari et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Formation Efficiency of Porous Oxide Films in Aluminum Anodizing
E. O. Gordeeva et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2018)
Effect of Si Content and Morphology on Corrosion Resistance of Anodized Cast Al-Si Alloys
Baiwei Zhu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Influence of Si and cooling rate on microstructure and mechanical properties of Al-Si-Mg cast alloys
Baiwei Zhu et al.
SURFACE AND INTERFACE ANALYSIS (2016)
In Situ and Operando AFM and EIS Studies of Anodization of Al 6060: Influence of Intermetallic Particles
Fan Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques
Baiwei Zhu et al.
MATERIALS & DESIGN (2016)
PEO of pre-anodized Al-Si alloys: Corrosion properties and influence of sealings
M. Mohedano et al.
APPLIED SURFACE SCIENCE (2015)
High-Pressure Die-Casting: Contradictions and Challenges
Franco Bonollo et al.
JOM (2015)
Influence of particle size and temperature on the wear properties of rutile-reinforced aluminium metal matrix composite
Rama Arora et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
The Effects of Microstructure Heterogeneities and Casting Defects on the Mechanical Properties of High-Pressure Die-Cast AlSi9Cu3(Fe) Alloys
Giulio Timelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Anodising of Al-Mg-Si-(Cu) Alloys Produced by R-HPDC
L. Chauke et al.
LIGHT METALS TECHNOLOGY 2013 (2013)
Predicting die life from die temperature for high pressure dies casting aluminium alloy
Alastair Long et al.
APPLIED THERMAL ENGINEERING (2012)
Comparison of anodised aluminium surfaces from four fabrication methods
F. Riddar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
FIB-SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminium
M. Jariyaboon et al.
ANTI-CORROSION METHODS AND MATERIALS (2011)
Sulphuric acid anodising of EN AC-46500 cast aluminium alloy
B. Gaston-Garcia et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2011)
Progress in Nano-Engineered Anodic Aluminum Oxide Membrane Development
Gerrard Eddy Jai Poinern et al.
MATERIALS (2011)
The behaviour of second phase particles during anodizing of aluminium alloys
M. Saenz de Miera et al.
CORROSION SCIENCE (2010)
Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys
M. Saenz de Miera et al.
SURFACE AND INTERFACE ANALYSIS (2010)
SURFACE FINISH EFFECT ON THE ANODIZING BEHAVIOUR OF Al-Si COMPONENTS OBTAINED BY SUB-LIQUIDUS CASTING PROCESS
S. Menargues et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
Microstructure Formation in AlSi4MgMn and AlMg5Si2Mn High-Pressure Die Castings
S. Otarawanna et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Effect of Process Parameters, Casting Thickness, and Alloys on the Interfacial Heat-Transfer Coefficient in the High-Pressure Die-Casting Process
Zhi-Peng Guo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Defect band characteristics in Mg-Al and Al-Si high-pressure die castings
C. M. Gourlay et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film
T. Aerts et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651
N. Birbilis et al.
CORROSION SCIENCE (2006)
Electrode temperature evolution during anodic oxidation of AlSi(Cu) alloys studied in the wall-jet reactor
LE Fratila-Apachitei et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Growth and characterization of anodic films on aluminum alloys in 5-sulfosalicylic acid solution
MF Morks et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Thermal effects associated with hard anodizing of cast aluminum alloys
LE Fratila-Apachitei et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2006)
Three-dimensional analysis of eutectic grains in hypoeutectic Al-Si alloys
CM Dinnis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Influence of substrate microstructure on the growth of anodic oxide layers
LE Fratila-Apachitei et al.
ELECTROCHIMICA ACTA (2004)
A transmission electron microscopy study of hard anodic oxide layers on AlSi(Cu) alloys
LE Fratila-Apachitei et al.
ELECTROCHIMICA ACTA (2004)
The influence of cast method and anodizing parameters on structure and layer thickness of aluminium alloys
J Konieczny et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Effect of Cu content on corrosion behavior of 7xxx series aluminum alloys
QJ Meng et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature using different current waveforms
LE Fratila-Apachitei et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Vickers microhardness of AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature
LE Fratila-Apachitei et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Voltage transients and morphology of AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature
LE Fratila-Apachitei et al.
SURFACE & COATINGS TECHNOLOGY (2002)
分享论文
