相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Preparation and characterization of hot-melt extruded polycaprolactone-based filaments intended for 3D-printing of tablets
Laura Viidik et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Quality considerations on the pharmaceutical applications of fused deposition modeling 3D printing
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D Printing as a Promising Tool in Personalized Medicine
Vanessa Marcia Vaz et al.
AAPS PHARMSCITECH (2021)
Pressure-assisted microsyringe 3D printing of oral films based on pullulan and hydroxypropyl methylcellulose
M. Elbadawi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Additive Manufacturing of Oral Tablets: Technologies, Materials and Printed Tablets
Alperen Abaci et al.
PHARMACEUTICS (2021)
Coupling hot melt extrusion and fused deposition modeling: Critical properties for successful performance q
Suresh Bandari et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Versatility on demand - The case for semi-solid micro-extrusion in pharmaceutics
Jhinuk Rahman et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
3D-printing of solid lipid tablets from emulsion gels
Jenny Johannesson et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Role of release modifiers to modulate drug release from fused deposition modelling (FDM) 3D printed tablets
Kejing Shi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Development of immediate release 3D-printed dosage forms for a poorly water-soluble drug by fused deposition modeling: Study of morphology, solid state and dissolution
Marina Fanous et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Printability-A key issue in extrusion-based bioprinting
Saman Naghieh et al.
JOURNAL OF PHARMACEUTICAL ANALYSIS (2021)
Harnessing artificial intelligence for the next generation of 3D printed medicines
Moe Elbadawi et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Impact of powder-binder interactions on 3D printability of pharmaceutical tablets using drop test methodology
Koyel Sen et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges
Iria Seoane-Viano et al.
JOURNAL OF CONTROLLED RELEASE (2021)
Stereolithography Apparatus Evolution: Enhancing Throughput and Efficiency of Pharmaceutical Formulation Development
Carlo Curti et al.
PHARMACEUTICS (2021)
Advances in powder bed fusion 3D printing in drug delivery and healthcare
Atheer Awad et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Emerging 3D printing technologies for drug delivery devices: Current status and future perspective
Jiawei Wang et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?
Chloe Parulski et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Polymeric drug delivery systems by additive manufacturing
Sedigheh Borandeh et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Shape memory materials and 4D printing in pharmaceutics
Alice Melocchi et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Controlling drug release with additive manufacturing-based solutions
Shriya K. Patel et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Melt extrusion deposition (MED™) 3D printing technology - A paradigm shift in design and development of modified release drug products
Yu Zheng et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Enabling modular dosage form concepts for individualized multidrug therapy: Expanding the design window for poorly water-soluble drugs
Rydvikha Govender et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Influence of Drug Load on the Printability and Solid-State Properties of 3D-Printed Naproxen-Based Amorphous Solid Dispersion
Eric Ofosu Kissi et al.
MOLECULES (2021)
Prediction of plasticization in a real biopolymer system (starch) using molecular dynamics simulations
Husamettin D. Ozeren et al.
MATERIALS & DESIGN (2020)
Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients
Christos Gioumouxouzis et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Speed it up, slow it down...An issue of bicalutamide release from 3D printed tablets
Witold Jamroz et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Detection of amorphous-amorphous phase separation in small molecular co-amorphous mixtures with SEM-EDS
Katja Pajula et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)
3D printing of multilayered orodispersible films with in-process drying
Jan Elbl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Simplification of fused deposition modeling 3D-printing paradigm: Feasibility of 1-step direct powder printing for immediate release dosage form production
Marina Fanous et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
FDM-printed pH-responsive capsules for the oral delivery of a model macromolecular dye
Georgios K. Eleftheriadis et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2020)
High Content Solid Dispersions for Dose Window Extension: A Basis for Design Flexibility in Fused Deposition Modelling
Rydvikha Govender et al.
PHARMACEUTICAL RESEARCH (2020)
Single particles as resonators for thermomechanical analysis
Peter Ouma Okeyo et al.
NATURE COMMUNICATIONS (2020)
Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective
Mohammad A. Azad et al.
PHARMACEUTICS (2020)
Mechanical Characterization of the Plastic Material GF-PA6 Manufactured Using FDM Technology for a Compression Uniaxial Stress Field via an Experimental and Numerical Analysis
Jorge Manuel Mercado-Colmenero et al.
POLYMERS (2020)
3D Printing of Reservoir Devices for Oral Drug Delivery: From Concept to Functionality through Design Improvement for Enhanced Mucoadhesion
Lukas Vaut et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery - A review
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Additive Manufacturing Technologies for Drug Delivery Applications
Abdullah Mohammed et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Processing of Polyvinyl Acetate Phthalate in Hot-Melt Extrusion-Preparation of Amorphous Solid Dispersions
Marius Monschke et al.
PHARMACEUTICS (2020)
3D Printing Technologies: Recent Development and Emerging Applications in Various Drug Delivery Systems
Shery Jacob et al.
AAPS PHARMSCITECH (2020)
Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology
Eman M. Mohamed et al.
AAPS PHARMSCITECH (2020)
The development and validation of a quality by design based process analytical tool for the inline quantification of Ramipril during hot -melt extrusion
Suha M. Dadou et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Screening of pharmaceutical polymers for extrusion-Based Additive Manufacturing of patient-tailored tablets
A. Samaro et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Improving the dissolution of a water-insoluble orphan drug through a fused deposition modelling 3-Dimensional printing technology approach
Mehtap Saydam et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Additive Manufacturing of a Point-of-Care Polypill: Fabrication of Concept Capsules of Complex Geometry with Bespoke Release against Cardiovascular Disease
Beatriz C. Pereira et al.
ADVANCED HEALTHCARE MATERIALS (2020)
3D Printing of Tunable Zero-Order Release Printlets
Fabrizio Fina et al.
POLYMERS (2020)
Novel On-Demand 3-Dimensional (3-D) Printed Tablets Using Fill Density as an Effective Release-Controlling Tool
Rishi Thakkar et al.
POLYMERS (2020)
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Gabriela G. Pereira et al.
PHARMACEUTICS (2020)
Independent Tailoring of Dose and Drug Release via a Modularized Product Design Concept for Mass Customization
Rydvikha Govender et al.
PHARMACEUTICS (2020)
Digital Twins in Pharmaceutical and Biopharmaceutical Manufacturing: A Literature Review
Yingjie Chen et al.
PROCESSES (2020)
Development of immediate release (IR) 3D-printed oral dosage forms with focus on industrial relevance
Marina Fanous et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
3D-Printing with precise layer-wise dose adjustments for paediatric use via pressure-assisted microsyringe printing
Ilias El Aita et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)
Exploring tablet design options for tailoring drug release and dose via fused deposition modeling (FDM) 3D printing
Guluzar Gorkem Buyukgoz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing of extended-release tablets of theophylline using hydroxypropyl methylcellulose (HPMC) hydrogels
Yiliang Cheng et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
An Overview of Additive Manufacturing of Polymers and Associated Composites
Shukantu Dev Nath et al.
POLYMERS (2020)
Digital Twins for Additive Manufacturing: A State-of-the-Art Review
Li Zhang et al.
APPLIED SCIENCES-BASEL (2020)
Structure-function correlation and personalized 3D printed tablets using a quality by design (QbD) approach
Jiaxiang Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Application and limitations of thermogravimetric analysis to delineate the hot melt extrusion chemical stability processing window
Dana E. Moseson et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
M3DISEEN: A novel machine learning approach for predicting the 3D printability of medicines
Moe Elbadawi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing tablets: Predicting printability and drug dissolution from rheological data
Moe Elbadawi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Prediction of temperature and crystal growth evolution during 3D printing of polymeric materials via extrusion
Y. Yuan et al.
MATERIALS & DESIGN (2020)
Hydroxypropyl Methylcellulose E15: A Hydrophilic Polymer for Fabrication of Orodispersible Film Using Syringe Extrusion 3D Printer
Pattaraporn Panraksa et al.
POLYMERS (2020)
The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations-printability-process modulation, with consecutive effects on in vitro release, stability and degradation
Kinga Ilyes et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Lipids and polymers in pharmaceutical technology: Lifelong companions
Juergen Siepmann et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Retentive device for intravesical drug delivery based on water-induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility
A. Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Atheer Awad et al.
PHARMACEUTICS (2019)
3D Printing of Metformin HCl PVA Tablets by Fused Deposition Modeling: Drug Loading, Tablet Design, and Dissolution Studies
Mariam Ibrahim et al.
AAPS PHARMSCITECH (2019)
Hydroxypropyl-β-cyclodextrin-based fast dissolving carbamazepine printlets prepared by semisolid extrusion 3D printing
Jaime Conceicao et al.
CARBOHYDRATE POLYMERS (2019)
The development of an inline Raman spectroscopic analysis method as a quality control tool for hot melt extruded ramipril fixed-dose combination products
G. P. Andrews et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Effects of Surfactants on Itraconazole-Hydroxypropyl Methylcellulose Acetate Succinate Solid Dispersion Prepared by Hot Melt Extrusion. II: Rheological Analysis and Extrudability Testing
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics
Kapilkumar Vithani et al.
PHARMACEUTICAL RESEARCH (2019)
Influence of High, Disperse API Load on Properties along the Fused-Layer Modeling Process Chain of Solid Dosage Forms
Marius Tidau et al.
PHARMACEUTICS (2019)
Drop-On-Powder 3D Printing of Tablets with an Anti-Cancer Drug, 5-Fluorouracil
Kejing Shi et al.
PHARMACEUTICS (2019)
Water-based 3D inkjet printing of an oral pharmaceutical dosage form
Hatim K. Cader et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D printed oral theophylline doses with innovative 'radiator-like' design: Impact of polyethylene oxide (PEO) molecular weight
Abdullah Isreb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Investigation of the parameters used in fused deposition modeling of poly (lactic acid) to optimize 3D printing sessions
E. Carlier et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Pamela Robles-Martinez et al.
PHARMACEUTICS (2019)
Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Expandable drug delivery system for gastric retention based on shape memory polymers: Development via 4D printing and extrusion
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Application of Micro-Scale 3D Printing in Pharmaceutics
Andrew Kjar et al.
PHARMACEUTICS (2019)
Cold plasma treatment to improve the adhesion of cassava starch films onto PCL and PLA surface
Helena M. Heidemann et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)
A 3D printed chitosan-pectin hydrogel wound dressing for lidocaine hydrochloride delivery
Jingjunjiao Long et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Chemical Imaging of Buried Interfaces in Organic-Inorganic Devices Using Focused Ion Beam-Time-of-Flight-Secondary-Ion Mass Spectrometry
Mariavitalia Tiddia et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
The Production Possibility of the Antimicrobial Filaments by Co-Extrusion of the PLA Pellet with Chitosan Powder for FDM 3D Printing Technology
Szymon Mania et al.
POLYMERS (2019)
Customized Novel Design of 3D Printed Pregabalin Tablets for Intra-Gastric Floating and Controlled Release Using Fused Deposition Modeling
Shrawani Lamichhane et al.
PHARMACEUTICS (2019)
Impact of Processing Parameters on the Quality of Pharmaceutical Solid Dosage Forms Produced by Fused Deposition Modeling (FDM)
Muqdad Alhijjaj et al.
PHARMACEUTICS (2019)
On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing
Ilias El Aita et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Development of mechanistic models to identify critical formulation and process variables of pastes for 3D printing of modified release tablets
Ahmed Zidan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Comparison of fused-filament fabrication to direct compression and injection molding in the manufacture of oral tablets
Evert Fuenmayor et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Exploration and Preparation of a Dose-Flexible Regulation System for Levetiracetam Tablets via Novel Semi-Solid Extrusion Three-Dimensional Printing
Mengsuo Cui et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
In-line rheological monitoring of fused deposition modeling
Timothy J. Coogan et al.
JOURNAL OF RHEOLOGY (2019)
Numerical simulation and modeling of the die swell for fiber suspension flows
Dihya Mezi et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2019)
Potentials with small-angle neutron scattering technique for understanding structure-property relation of 3D-printed materials
Tae Hui Kang et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Loading of Porous Functionalized Calcium Carbonate Microparticles: Distribution Analysis with Focused Ion Beam Electron Microscopy and Mercury Porosimetry
Maryam Farzan et al.
PHARMACEUTICS (2019)
Characterising glass transition temperatures and glass dynamics in mesoporous silica-based amorphous drugs
Eric Ofosu Kissi et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)
A dynamic model for current-based nozzle condition monitoring in fused deposition modelling
Yedige Tlegenov et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Rheological and Mechanical Investigation into the Effect of Different Molecular Weight Poly(ethylene glycol)s on Polycaprolactone-Ciprofloxacin Filaments
Mohammed Elbadawi
ACS OMEGA (2019)
3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction
Carolin Korte et al.
AAPS PHARMSCITECH (2018)
Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems
Jiaxiang Zhang et al.
AAPS PHARMSCITECH (2018)
Controlled Release of 5-Fluorouracil from Alginate Beads Encapsulated in 3D Printed pH-Responsive Solid Dosage Forms
Christos I. Gioumouxouzis et al.
AAPS PHARMSCITECH (2018)
Reshaping drug development using 3D printing
Atheer Awad et al.
DRUG DISCOVERY TODAY (2018)
On demand manufacturing of patient-specific liquid capsules via coordinated 3D printing and liquid dispensing
Tochukwu C. Okwuosa et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Development of a dual extrusion printing technique for an acid- and thermo-labile drug
Wiebke Kempin et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release
Yan Yang et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule
Derrick M. Smith et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Characterisation of pore structures of pharmaceutical tablets: A review
Daniel Markl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D extrusion printing of high drug loading immediate release paracetamol tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
QR encoded smart oral dosage forms by inkjet printing
Magnus Edinger et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
An Overview on Additive Manufacturing of Polymers
Iwona Jasiuk et al.
JOM (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
Touraj Ehtezazi et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Glass-Transition Temperature of the beta-Relaxation as the Major Predictive Parameter for Recrystallization of Neat Amorphous Drugs
Eric Ofosu Kissi et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2018)
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Yongzhou Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
The Role of Glass Transition Temperatures in Coamorphous Drug-Amino Acid Formulations
Eric Ofosu Kissi et al.
MOLECULAR PHARMACEUTICS (2018)
Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
Carolin Korte et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2018)
3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications
Nicolaos Scoutaris et al.
PHARMACEUTICAL RESEARCH (2018)
Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
Jehad M. Nasereddin et al.
PHARMACEUTICAL RESEARCH (2018)
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Sarah J. Trenfield et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2018)
Programming of Multicomponent Temporal Release Profiles in 3D Printed Polypills via Core-Shell, Multilayer, and Gradient Concentration Profiles
Alexander P. Haring et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
G. D. Goh et al.
MATERIALS & DESIGN (2018)
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Evert Fuenmayor et al.
PHARMACEUTICS (2018)
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Applications of Powder X-Ray Diffraction in Small Molecule Pharmaceuticals: Achievements and Aspirations
Naveen K. Thakral et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Role of Polymers in 3D Printing Technology for Drug Delivery - An Overview
Ankit Jain et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
Analytical aspects of printed oral dosage forms
Magnus Edinger et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Photocurable Bioinks for the 3D Pharming of Combination Therapies
Giovanny F. Acosta-Velez et al.
POLYMERS (2018)
Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2017)
Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging
Daniel Markl et al.
PHARMACEUTICAL RESEARCH (2017)
The flow properties and presence of crystals in drug-polymer mixtures: Rheological investigation combined with light microscopy
J. Aho et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printing of tablets using inkjet with UV photoinitiation
Elizabeth A. Clark et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Dropwise additive manufacturing of pharmaceutical products for amorphous and self emulsifying drug delivery systems
Elcin Icten et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Jiaxiang Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Applications of ethylene vinyl acetate copolymers (EVA) in drug delivery systems
Christian Schneider et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
A. Maroni et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
Mary Kyobula et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Single-frequency dielectric relaxation used to characterize the glass transition time of polydextrose
Martin G. Buehler et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Development of Oromucosal Dosage Forms by Combining Electrospinning and Inkjet Printing
Mirja Palo et al.
MOLECULAR PHARMACEUTICS (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Mohsen Attaran
BUSINESS HORIZONS (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Process analytical techniques for hot-melt extrusion and their application to amorphous solid dispersions
Patrick Hitzer et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)
Drop-on-Demand System for Manufacturing of Melt-based Solid Oral Dosage: Effect of Critical Process Parameters on Product Quality
Elcin Icten et al.
AAPS PHARMSCITECH (2016)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
Recent developments in the experimental investigations of relaxations in pharmaceuticals by dielectric techniques at ambient and elevated pressure
Katarzyna Grzybowska et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Recent advances and potential applications of modulated differential scanning calorimetry (mDSC) in drug development
Matthias Manne Knopp et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Modifying release characteristics from 3D printed drug-eluting products
Johan Boetker et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Near-infrared chemical imaging (NIR-CI) of 3D printed pharmaceuticals
Milad Khorasani et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Alvaro Goyanes et al.
JOURNAL OF CONTROLLED RELEASE (2016)
A Promising New Method to Estimate Drug-Polymer Solubility at Room Temperature
Matthias Manne Knopp et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Determination of the thermal short time stability of polymers by fast scanning calorimetry
Juergen E. K. Schawe et al.
THERMOCHIMICA ACTA (2016)
Effect of PCL and compatibility contents on the morphology, crystallization and mechanical properties of PLA/PCL blends
Sunanta Wachirahuttapong et al.
COE ON SUSTAINABLE ENERGY SYSTEM (THAI-JAPAN) (2016)
Raman spectroscopy in pharmaceutical product design
Amrit Paudel et al.
ADVANCED DRUG DELIVERY REVIEWS (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Hyperspectral imaging in quality control of inkjet printed personalised dosage forms
Hossein Vakili et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Johanna Aho et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Personalised dosing: Printing a dose of one's own medicine
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Inkjet printing for pharmaceutics - A review of research and manufacturing
Ronan Daly et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
Quantifying Pharmaceutical Film Coating with Optical Coherence Tomography and Terahertz Pulsed Imaging: An Evaluation
Hungyen Lin et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Dropwise Additive Manufacturing of Pharmaceutical Products for Melt-Based Dosage Forms
Elcin Icten et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Evaluation of Drug-Polymer Solubility Curves Through Formal Statistical Analysis: Comparison of Preparation Techniques
Matthias Manne Knopp et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
The Future of Pharmaceutical Manufacturing Sciences
Jukka Rantanen et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
Jorrit Jeroen Water et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Functional Thermoplastic Materials from Derivatives of Cellulose and Related Structural Polysaccharides
Yoshikuni Teramoto
MOLECULES (2015)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Raman spectroscopy in the analysis of food and pharmaceutical nanomaterials
Ying-Sing Li et al.
JOURNAL OF FOOD AND DRUG ANALYSIS (2014)
Comparison of several chemometric methods of libraries and classifiers for the analysis of expired drugs based on Raman spectra
Gao Qun et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2014)
Dropwise Additive Manufacturing of Pharmaceutical Products for Solvent-Based Dosage Forms
Laura Hirshfield et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
The effects of laser energy density and particle size in the selective laser sintering of polycaprolactone/progesterone specimens: morphology and drug release
Gean Vitor Salmoria et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Terahertz pulsed imaging as an advanced characterisation tool for film coatings-A review
Miriam Haaser et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Pharmaceutical applications of dynamic mechanical thermal analysis
David S. Jones et al.
ADVANCED DRUG DELIVERY REVIEWS (2012)
Small- and wide-angle X-ray scattering (SWAXS) for quantification of aspirin content in a binary powder mixture
A. Hodzic et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
ToF-SIMS analysis of chemical heterogenities in inkjet micro-array printed drug/polymer formulations
Nikolaos Scoutaris et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Near infrared and Raman spectroscopy for the in-process monitoring of pharmaceutical production processes
T. De Beer et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Asma B. M. Buanz et al.
PHARMACEUTICAL RESEARCH (2011)
Application of Fourier Transform Infrared Spectrophotometry in Pharmaceutical Drugs Analysis
Andrei A. Bunaciu et al.
APPLIED SPECTROSCOPY REVIEWS (2010)
Investigation of various shellac grades: additional analysis for identity
Karl Buch et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
A novel fast disintegrating tablet fabricated by three-dimensional printing
Deng-Guang Yu et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Differential Scanning Calorimetric Studies on Chemically Cross-linked Sodium Carboxymethylcellulose Hydrogels
Toru Onishi et al.
KOBUNSHI RONBUNSHU (2008)
Molecular dynamics simulations for drug dosage form development: thermal and solubility characteristics for hot-melt extrusion
Martin Maus et al.
MOLECULAR SIMULATION (2008)
Tablets with material gradients fabricated by three-dimensional printing
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2007)
Raman spectroscopy for quantitative analysis of pharmaceutical solids
Clare J. Strachan et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2007)
Effects of concentration, bloom degree, and pH on gelatin melting and gelling temperatures using small amplitude oscillatory rheology
Fernando A. Osorio et al.
INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2007)
Near-infrared spectroscopy and imaging: Basic principles and pharmaceutical applications
G Reich
ADVANCED DRUG DELIVERY REVIEWS (2005)
Crystal structures of drugs: Advances in determination, prediction and engineering
S Datta et al.
NATURE REVIEWS DRUG DISCOVERY (2004)
Evaluation of critical formulation factors in the development of a rapidly dispersing captopril oral dosage form
KJ Lee et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2003)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)
分享论文
