相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Bimodality of incipient plastic strength in face-centered cubic high-entropy alloys
Yakai Zhao et al.
ACTA MATERIALIA (2021)
Mechanical behavior of high-entropy alloys
Weidong Li et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Achieving excellent strength-ductility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping
D. D. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Mike Schneider et al.
ACTA MATERIALIA (2021)
Microstructural and compositional design principles for Mo-V-Nb-Ti-Zr multi-principal element alloys: a high-throughput first-principles study
Zhidong Leong et al.
ACTA MATERIALIA (2021)
Temperature-dependent mechanisms of dislocation–twin boundary interactions in Ni-based equiatomic alloys
Sho Hayakawa et al.
ACTA MATERIALIA (2021)
Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling
T. W. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
CALPHAD-aided design of high entropy alloy to achieve high strength via precipitate strengthening
Lin Guo et al.
SCIENCE CHINA-MATERIALS (2020)
Cooperative deformation in high-entropy alloys at ultralow temperatures
Muhammad Naeem et al.
SCIENCE ADVANCES (2020)
Rapid heating induced ultrahigh stability of nanograined copper
X. Y. Li et al.
SCIENCE ADVANCES (2020)
Effects of Ta on the high temperature oxidation behavior of IN617 alloy in air
Shuang Gao et al.
CORROSION SCIENCE (2020)
A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature
B. B. Bian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Towards ferrous medium-entropy alloys with low-cost and high-performance
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2020)
Influence of lattice distortion on stacking fault energies of CoCrFeNi and Al-CoCrFeNi high entropy alloys
Shi Qiu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures
Lei Fan et al.
NATURE COMMUNICATIONS (2020)
Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction
Lei Tang et al.
ACTA MATERIALIA (2020)
Novel Co-free high performance TRIP and TWIP medium-entropy alloys at cryogenic temperatures
Ran Wei et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Plastic Deformation Behavior of 40Fe-25Ni-15Cr-10Co-10V High-Entropy Alloy for Cryogenic Applications
Min Ji Jang et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy
K. Gorecki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
Qingqing Ding et al.
MATERIALS TODAY (2019)
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Zhangwei Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
Z. F. He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Plastic deformation transition in FeCrCoNiAlx high-entropy alloys
Shuo Huang et al.
Materials Research Letters (2019)
Anomalous work hardening behavior of Fe40Mn40Cr10Co10 high entropy alloy single crystals deformed by twinning and slip
S. Picak et al.
ACTA MATERIALIA (2019)
Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy
Yong Hee Jo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Ultrastrong duplex high-entropy alloy with 2 GPa cryogenic strength enabled by an accelerated martensitic transformation
Dong Geun Kim et al.
SCRIPTA MATERIALIA (2019)
Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy
Jing Su et al.
ACTA MATERIALIA (2019)
Ultrastrong Medium-Entropy Single-Phase Alloys Designed via Severe Lattice Distortion
Seok Su Sohn et al.
ADVANCED MATERIALS (2019)
Effects of Alloying Elements on the Stacking Fault Energies of Ni58Cr32Fe10 Alloys: A First-Principle Study
Yuchen Dou et al.
METALS (2019)
Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures
Junpeng Liu et al.
SCIENCE CHINA-MATERIALS (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy
Evan Ma et al.
NATURE COMMUNICATIONS (2019)
Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning
Xuzhou Gao et al.
MATERIALIA (2019)
Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy
C. E. Slone et al.
ACTA MATERIALIA (2018)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
Stacking fault energy of face-centered-cubic high entropy alloys
S. F. Liu et al.
INTERMETALLICS (2018)
Effect of low-temperature on mechanical behavior for an AISI 304 austenitic stainless steel
Chengsi Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Ultrastrong Al0.1CoCrFeNi high-entropy alloys at small scales: effects of stacking faults vs. nanotwins
Xiaobin Feng et al.
NANOSCALE (2018)
On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys
Benay Uzer et al.
MATERIALS RESEARCH LETTERS (2018)
Exceptional phase-transformation strengthening of ferrous medium entropy alloys at cryogenic temperatures
Jae Wung Bae et al.
ACTA MATERIALIA (2018)
Fundamental understanding of mechanical behavior of high-entropy alloys at low temperatures: A review
Zongyang Lyu et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
Ultrahigh cryogenic strength and exceptional ductility in ultrafine-grained CoCrFeMnNi high-entropy alloy with fully recrystallized structure
S. J. Sun et al.
MATERIALS TODAY NANO (2018)
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Y. H. Jo et al.
NATURE COMMUNICATIONS (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
G. Laplanche et al.
ACTA MATERIALIA (2017)
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
Biao Cai et al.
ACTA MATERIALIA (2017)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
DongYue Li et al.
INTERMETALLICS (2016)
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Bernd Gludovatz et al.
NATURE COMMUNICATIONS (2016)
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
Seok Su Sohn et al.
ACTA MATERIALIA (2015)
The influence of stacking fault energy on the microstructural and strainhardening evolution of Fe-Mn-Al-Si steels during tensile deformation
D. T. Pierce et al.
ACTA MATERIALIA (2015)
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
Shuo Huang et al.
SCRIPTA MATERIALIA (2015)
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
ZiJiao Zhang et al.
NATURE COMMUNICATIONS (2015)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
The effects of Ta on the stress rupture properties and microstructural stability of a novel Ni-base superalloy for land-based high temperature applications
Liang Zheng et al.
MATERIALS & DESIGN (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel
I. Gutierrez-Urrutia et al.
ACTA MATERIALIA (2012)
Effects of alloying element and temperature on the stacking fault energies of dilute Ni-base superalloys
S. L. Shang et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2012)
Work hardening of polycrystalline Cu with nanoscale twins
L. Lu et al.
SCRIPTA MATERIALIA (2012)
Low temperature mechanical properties of 316L type stainless steel after hydrostatic extrusion
P. Czarkowski et al.
FUSION ENGINEERING AND DESIGN (2011)
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
Sheng Guo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Strong Strain Hardening in Nanocrystalline Nickel
X. L. Wu et al.
PHYSICAL REVIEW LETTERS (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
The Nabarro equation for thermally activated plastic glide
A. H. Cottrell
PHILOSOPHICAL MAGAZINE (2006)
Ultrahigh strength and high electrical conductivity in copper
L Lu et al.
SCIENCE (2004)
Impact tensile behavior of 9% nickel steel at low temperature
HS Shin et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)
Mesoscopic analysis of structure and strength of dislocation junctions in fcc metals
VB Shenoy et al.
PHYSICAL REVIEW LETTERS (2000)