4.8 Article

Multifunctional Electrolyte Additive Stabilizes Electrode-Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Multidisciplinary Sciences

Electrolytes enriched by potassium perfluorinated sulfonates for lithium metal batteries

Shihan Qi et al.

Summary: This study proposes a multi-factor principle for electrolyte additive molecular design to inhibit the growth of Li dendrites in lithium metal batteries. Experimental results demonstrate the excellent performance of the proposed electrolyte additives.

SCIENCE BULLETIN (2021)

Article Nanoscience & Nanotechnology

Investigating the Compatibility of TTMSP and FEC Electrolyte Additives for LiNi0.5Mn0.3Co0.2O2 (NMC)-Silicon Lithium-Ion Batteries

Anulekha K. Haridas et al.

Summary: This study investigates the compatibility of multi-electrolyte additives for NMC-silicon lithium-ion batteries. The results show that at the optimal TTMSP/FEC ratio, the NMC-Si full-cells achieve a 2x longer cycle life and higher areal capacities with improved capacity retention. Furthermore, a detailed investigation of the electrode-electrolyte interfaces reveals the synergistic effects of electrolyte additives in stabilizing the interfaces and minimizing capacity degradation in NMC-Si full-cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

In Situ Construction of Uniform and Robust Cathode-Electrolyte Interphase for Li-Rich Layered Oxides

Jingteng Zhao et al.

Summary: This study demonstrates an in situ anchoring + pouring synergistic cathode-electrolyte interphase (CEI) construction using HTCN and TMSP electrolyte additives to alleviate the challenges faced by high-energy-density Li-rich layered oxides in conventional electrolytes. The uniform and robust in situ constructed CEI layer suppresses transition metal dissolution, shields the cathode against diverse side reactions, and significantly improves electrochemical performance with minimal discharge voltage decay. Insights into enhancing the performance of high-energy and high-voltage cathode materials through effective, convenient, and economical electrolyte approaches are provided.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Physical

A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase

Jian Tan et al.

Summary: Rechargeable lithium batteries have transformed energy storage technology, but their further commercialization is hindered by short lifetime and safety issues, mainly due to the unstable solid-electrolyte interphase (SEI) and uncontrolled lithium dendrite growth. Research on SEI worldwide has focused on its debated structure and composition, particularly the role of the main component LiF. This review covers the development history of the SEI model, fundamental understanding of SEI, categorization of anode materials generating LiF in SEI, characterization techniques of SEI layers, transport mechanism of Li+ ions within SEI, physical properties of LiF, and analysis of LiF sources, offering insights for future research directions to promote large-scale applications of lithium metal batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Energy & Fuels

Rejuvenating dead lithium supply in lithium metal anodes by iodine redox

Chengbin Jin et al.

Summary: The researchers use an iodic species to react with inactive lithium, bringing it back to life and thus making batteries last longer.

NATURE ENERGY (2021)

Article Nanoscience & Nanotechnology

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Qiuyan Liu et al.

Summary: This study investigated the synergistic effects of TMB in dual-additive electrolytes on protecting high-voltage cathode materials, providing insights into a new approach for electrolyte design in lithium batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Formulating the Electrolyte Towards High-Energy and Safe Rechargeable Lithium-Metal Batteries

Qiang Ma et al.

Summary: By adjusting the composition of conventional electrolytes, a hybrid electrolyte was developed to ensure high stability, allowing both the Li-metal anode and nickel-rich layered oxide cathodes to exhibit good performance. Experimental results show that cells with the new electrolyte exhibit favorable cycling and rate performance, achieving a high specific energy. These findings provide reasonable design principles for the practical realization of high-energy rechargeable batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Enabling Lithium Metal Anode in Nonflammable Phosphate Electrolyte with Electrochemically Induced Chemical Reactions

Haochuan Zhang et al.

Summary: In this research, stable SEI formation and reversible Li stripping/plating were achieved by introducing oxygen into triethyl phosphate. The method was validated in a nonflammable electrolyte and demonstrated control over dendrite formation.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

LiNbO3-coated LiNi0.7Co0.1Mn0.2O2 and chlorine-rich argyrodite enabling high-performance solid-state batteries under different temperatures

Linfeng Peng et al.

Summary: The study investigates the enhancement of solid-state battery performance by surface modification of high-voltage cathodes using LiNbO3 coating. The LNO@NCM712 electrode shows improved cyclic performance and lower resistance changes at different rates and temperatures, providing insight into the influence of modification layers on SSB performance and guidance for cathode modification design strategy.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer

Feng Wu et al.

Summary: In this study, a self-reconstructive cathode/electrolyte interphase (CEI) layer with good interfacial stability was designed for Ni-rich cathode by incorporating dendritic mesoporous silica (DMS) as a multifunctional electrolyte additive. The sample with a self-reconstructive CEI layer exhibited significantly superior cyclic stability under extended cut-off voltage or elevated temperature, and the flame-retardant effect of DMS additive contributed towards the thermal stability of the electrolyte and electrode, improving the safety aspect of the battery. This work provides new insights into reducing undesired self-reinforced failure process in Ni-rich cathode and reconstructing a self-healing CEI layer for high-safety, high-voltage lithium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

An acetamide additive stabilizing ultra-low concentration electrolyte for long-cycling and high-rate sodium metal battery

Rui Jiang et al.

Summary: A new additive, BSTFA, is introduced in this study to stabilize the electrolyte and fabricate a highly conductive interface in sodium metal batteries, improving their performance.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Hydrolysis of LiPF6-Containing Electrolyte at High Voltage

Mingzhu Liu et al.

Summary: By combining theoretical and experimental approaches, this study identified the direct reaction between water and PF6- as the main source of corrosive HF in Li-ion batteries. This hydrolysis process is accelerated by high voltage, highlighting the need for effective mitigation strategies to stabilize LiPF6-based electrolytes for high voltage LIBs. Clarifying this important electrolyte failure mechanism points to the potential for improved battery performance and longevity.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Advanced Electrolytes Enabling Safe and Stable Rechargeable Li-Metal Batteries: Progress and Prospects

Shuang-Jie Tan et al.

Summary: This article summarizes the challenges of electrolytes in rechargeable Li-metal batteries (RLBs) and proposes requirements for improving battery performance. It also reviews the achievements of liquid- and solid-state electrolytes in RLBs, analyzes their drawbacks, and offers solutions. The article outlines the development strategy of in situ gelation electrolytes and calls for more attention to battery safety research in pouch cell users.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Energy & Fuels

Phosphate Polyanion Materials as High-Voltage Lithium-Ion Battery Cathode: A Review

JinKiong Ling et al.

Summary: The review focuses on the development of phosphate polyanion cathode materials for high-voltage lithium-ion batteries, highlighting their high electrochemical potential, long cycle stability, low cost, and achieved specific capacity. Various techniques to improve the electrical and ionic conductivities of these cathodes are discussed, along with strategies for future high-voltage phosphate polyanion cathode materials.

ENERGY & FUELS (2021)

Article Chemistry, Multidisciplinary

A Sustainable Solid Electrolyte Interphase for High-Energy-Density Lithium Metal Batteries Under Practical Conditions

Xue-Qiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Yuanqin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Dual-Functional Electrolyte Additives toward Long-Cycling Lithium-Ion Batteries: Ecofriendly Designed Carbonate Derivatives

Jung-Gu Han et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Unanticipated Mechanism of the Trimethylsilyl Motif in Electrolyte Additives on Nickel-Rich Cathodes in Lithium-Ion Batteries

Min Woo Park et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Electrochemistry

4-(Trimethylsilyl) Morpholine as a Multifunctional Electrolyte Additive in High Voltage Lithium Ion Batteries

Jianzhong Yang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Nanoscience & Nanotechnology

Trimethyl Borate as Film-Forming Electrolyte Additive To Improve High-Voltage Performances

Qiuyan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

CO2 Electroreduction from Carbonate Electrolyte

Yuguang C. Li et al.

ACS ENERGY LETTERS (2019)

Article Nanoscience & Nanotechnology

Stabilizing a High-Voltage Lithium-Rich Layered Oxide Cathode with a Novel Electrolyte Additive

Jianlian Lan et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Di(methylsulfonyl) Ethane: New Electrolyte Additive for Enhancing LiCoO2/Electrolyte Interface Stability under High Voltage

Xiangzhen Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Transport in Superconcentrated LiPF6 and LiBF4/Propylene Carbonate Electrolytes

Julian Self et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode

Yanxia Yuan et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

Article Chemistry, Physical

Electrocatalytic transformation of HF impurity to H-2 and LiF in lithium-ion batteries

Dusan Strmcnik et al.

NATURE CATALYSIS (2018)

Article Chemistry, Physical

Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon

Roland Jung et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Article Chemistry, Physical

High Voltage LiNi0.5Mn0.3Co0.2O2/Graphite Cell Cycled at 4.6 V with a FEC/HFDEC-Based Electrolyte

Meinan He et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Self-extinguishing electrolytes using fluorinated alkyl phosphates for lithium batteries

Tohru Shiga et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Review Chemistry, Physical

A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries

Arumugam Manthiram et al.

ENERGY STORAGE MATERIALS (2017)

Article Chemistry, Physical

LiTDI: A Highly Efficient Additive for Electrolyte Stabilization in Lithium-Ion Batteries

Chao Xu et al.

CHEMISTRY OF MATERIALS (2017)

Article Electrochemistry

Importance of Reduction and Oxidation Stability of High Voltage Electrolytes and Additives

Samuel A. Delp et al.

ELECTROCHIMICA ACTA (2016)

Article Chemistry, Physical

Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive

Jiangfeng Qian et al.

NANO ENERGY (2015)

Article Chemistry, Physical

Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries

Sung-Kyun Jung et al.

ADVANCED ENERGY MATERIALS (2014)

Article Chemistry, Multidisciplinary

Effect of the Damping Function in Dispersion Corrected Density Functional Theory

Stefan Grimme et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2011)

Article Electrochemistry

Chemical reactivity of PF5 and LiPF6 in ethylene carbonate/dimethyl carbonate solutions

SE Sloop et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)