☆ 4.5 Article

Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Aerospace

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Qing MIAO et al.

Summary: Creep feed profile grinding of single crystal nickel-based superalloy fir-tree blade root forms was conducted using microcrystalline alumina abrasive wheels in this study. The grinding force was significantly influenced by the competition between grinding parameters and workpiece profile, leading to differences in surface quality.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Thermodynamics

Investigation on cooling behavior of axially rotating heat pipe in profile grinding of turbine blade slots

Jiajia Chen et al.

Summary: A new cooling method incorporating an axially rotating heat pipe (RHP) has been proposed for profile grinding, demonstrating great cooling advantages compared to traditional methods. The study analyzed the cooling behavior through simulation and experimental grinding of titanium alloys, providing insights for green machining in industrial products with complex profiles.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A study on thermal performance of revolving heat pipe grinding wheel

Jiajia Chen et al.

Summary: A novel cooling method incorporating a two phase revolving heat pipe within the annular disk of the grinding wheel has been proposed to reduce grinding temperature effectively, avoid defects in both workpiece and grinding wheel. Experimental results showed significantly lower grinding temperature with revolving heat pipe cooling compared to coolant cooling.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of stacking fault energy on deformation mechanisms in Cu and Cu-30% Zn alloy with gradient structure obtained by SMAT

Xiaomin Liu et al.

Summary: The study focused on the deformation mechanism and mechanical properties of pure copper and copper-zinc alloys with low stacking fault energy. It was found that Cu-30%Zn samples exhibited higher yield strength and better ductility compared to pure Cu samples. Surface mechanical attrition treatment (SMAT) resulted in an optimized combination of strength and ductility in the Cu-30%Zn samples.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling

Meng Wang et al.

Summary: The study produced Cu-Fe alloy sheet using a process of double-melt mixed casting followed by cold rolling, resulting in significant reduction in thickness and remarkable enhancement in mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Civil

Experimental study of Ni-based single-crystal superalloy: Microstructure evolution and work hardening of ground subsurface

Yunchao Xu et al.

Summary: The grinding experiment of second-generation nickel-based single-crystal superalloy DD5 was conducted in this study, revealing that grinding force is affected by grinding speed and feed speed. Microstructure evolution beneath the ground surface includes a white layer and a severe deformed layer with elements segregation. Grinding parameters significantly influence the thickness and hardening degree of the white layer.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms

Zhirong Liao et al.

Summary: The surface integrity of machined metal components is crucial for their functionality, longevity, and overall performance. Surface defects induced by machining operations vary in scale and cause microstructural, mechanical, and chemical effects, requiring advanced evaluation and post-processing techniques. The paper explores the state-of-the-art of surface integrity research, focusing on governing mechanisms and emerging evaluation approaches, and analyzes the multi-scale phenomena associated with metal machining.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Assessment of thermo-mechanical fatigue in a nickel-based single-crystal superalloy CMSX-4 accounting for temperature gradient effects

Jingyu Sun et al.

Summary: The study shows that the lifetime of nickel-based single-crystal superalloy CMSX-4 under thermo-mechanical fatigue and thermal gradient mechanical fatigue loading conditions is significantly affected by temperature gradient. Conventional fatigue models fail to accurately describe this, emphasizing the need to consider temperature gradient and thermal-mechanical phase angle effects.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Industrial

Controllable generation of 3D textured abrasive tools via multiple-pass laser ablation

Hao Nan Li et al.

Summary: This study explores the fabrication of Textured Abrasive Tool (TAT) using laser ablation technique, proposing a laser parameter selection strategy based on experimental and theoretical analysis. The produced TATs with different structures showed superior performance in grinding trials, indicating the potential for next-generation advanced abrasive tools embedded with complex and functional 3D machining elements.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure evolution and crystallographic slip modes during grind hardening in TC21 titanium alloy

Yushi Wang et al.

Summary: In this study, microstructure evolution and slip mechanism of TC21 titanium alloy in grind hardening and aging treatment were investigated, showing that the hardened layer mainly consisted of TiN. Tensile strength and elongation increased after grind hardening process, with different effects observed in grind hardening and aging treatment. The study also demonstrated a method to deduce slip systems using interior crystall misorientation axis, identifying three major slip systems.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Development of novel high-shear and low-pressure grinding tool with flexible composite

Yebing Tian et al.

Summary: The novel abrasive tool based on the principle of liquid body armor was developed with flexible composite to improve grinding performance, showing superior shear thickening properties in rheological measurements. Grinding experiments on Inconel718 workpiece revealed a significant improvement in surface quality, with the original pretreatment marks completely eliminated and a smoother surface finish achieved. Experimental results confirmed the effectiveness of the novel high-shear and low-pressure abrasive tool for difficult-to-machine materials in manufacturing industries.

MATERIALS AND MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Thermodynamics

On the temperature field in the creep feed grinding of turbine blade root: Simulation and experiments

Qing Miao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Manufacturing

A magnetic shear thickening media in magnetic field-assisted surface finishing

Zenghua Fan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2020)

添加到收藏夹

Article Automation & Control Systems

Experimental investigation on high-shear and low-pressure grinding process for Inconel718 superalloy

Yebing Tian et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Tool wear behavior of vitrified microcrystalline alumina wheels in creep feed profile grinding of turbine blade root of single crystal nickel-based superalloy

Qing Miao et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructural metallic materials: Structures and mechanical properties

L. G. Sun et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal effect on oxidation layer evolution and phase transformation in grinding of Fe-Ni super alloy

Chongjun Wu et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Preparation of ultrafine-grained GH4169 superalloy by high-pressure torsion and analysis of grain refinement mechanism

Junting Luo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case

Zhirong Liao et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical behavior of structurally gradient nickel alloy

Jie Ding et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the influence of crystallography and dendritic microstructure on micro shear behavior of single crystal Ni-based superalloys

G. Laplanche et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Extra strengthening and work hardening in gradient nanotwinned metals

Zhao Cheng et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Surface gradient nanostructures in high speed machined 7055 aluminum alloy

Yanxia Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Review Engineering, Manufacturing

Temperatures in Grinding-A Review

W. Brian Rowe

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface self-nanocrystallization of α plus β titanium alloy by surface mechanical grinding treatment

Chuang Li et al.

METALS AND MATERIALS INTERNATIONAL (2017)

添加到收藏夹

Article Engineering, Manufacturing

State-of-the-art in surface integrity in machining of nickel-based super alloys

A. Thakur et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Back stress strengthening and strain hardening in gradient structure

Muxin Yang et al.

MATERIALS RESEARCH LETTERS (2016)

添加到收藏夹

Review Nanoscience & Nanotechnology

Stabilizing nanostructures in metals using grain and twin boundary architectures

K. Lu

NATURE REVIEWS MATERIALS (2016)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Evaluation of workpiece surface integrity following point grinding of advanced titanium and nickel based alloys

D. T. Curtis et al.

3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment

X. C. Liu et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Engineering, Industrial

Abrasive machining of advanced aerospace alloys and composites

Fritz Klocke et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile behavior of nickel-base single-crystal superalloy DD6

Xinhong Xiong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Making strong nanomaterials ductile with gradients

K. Lu

SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergetic Strengthening by Gradient Structure

X. L. Wu et al.

MATERIALS RESEARCH LETTERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel

X. C. Liu et al.

SCIENCE (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper

T. H. Fang et al.

SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of strain rate on microstructure of polycrystalline oxygen-free high conductivity copper severely deformed at liquid nitrogen temperature

B. Zhang et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Engineering, Aerospace

Surface Recrystallization in Nickel Base Single Crystal Superalloy DD6

Xiong Jichun et al.

CHINESE JOURNAL OF AERONAUTICS (2010)

添加到收藏夹

Article Engineering, Aerospace

Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels

Ding Wenfeng et al.

CHINESE JOURNAL OF AERONAUTICS (2010)

添加到收藏夹

Review Multidisciplinary Sciences

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

K. Lu et al.

SCIENCE (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment

W. L. Li et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

Article Engineering, Industrial

Profiled superabrasive grinding wheels for the machining of a nickel based superalloy

D. K. Aspinwall et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Large strain deformation and ultra-fine grained materials by machining

S Swarninathan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrahigh strength and high electrical conductivity in copper

L Lu et al.

SCIENCE (2004)

添加到收藏夹

Article Engineering, Mechanical

Finite element modeling of chip formation in the domain of negative rake angle cutting

Y Ohbuchi et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.