相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Multimaterial Printing for Cephalopod-Inspired Light-Responsive Artificial Chromatophores
Daehoon Han et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Porphyrinic Zirconium Metal-Organic Frameworks (MOFs) as Heterogeneous Photocatalysts for PET-RAFT Polymerization and Stereolithography
Liwen Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
3D printing of inherently nanoporous polymers via polymerization-induced phase separation
Zheqin Dong et al.
NATURE COMMUNICATIONS (2021)
Direct printing of functional 3D objects using polymerization-induced phase separation
Bhavana Deore et al.
NATURE COMMUNICATIONS (2021)
Reversible Deactivation Radical Polymerization: From Polymer Network Synthesis to 3D Printing
Ali Bagheri et al.
ADVANCED SCIENCE (2021)
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Qi Ge et al.
SCIENCE ADVANCES (2021)
Development, characterization, and applications of multi-material stereolithography bioprinting
Bagrat Grigoryan et al.
SCIENTIFIC REPORTS (2021)
Tough Multimaterial Interfaces through Wavelength-Selective 3D Printing
Neil D. Dolinski et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
3D printed hybrid refractive/diffractive achromat and apochromat for the visible wavelength range
Michael Schmid et al.
OPTICS LETTERS (2021)
Three-dimensional printing of multicomponent glasses using phase-separating resins
David G. Moore et al.
NATURE MATERIALS (2020)
High-resolution tomographic volumetric additive manufacturing
Damien Loterie et al.
NATURE COMMUNICATIONS (2020)
Autonomic perspiration in 3D-printed hydrogel actuators
Anand K. Mishra et al.
SCIENCE ROBOTICS (2020)
Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices
Zhenpeng Xu et al.
ADDITIVE MANUFACTURING (2020)
Original Fabrication strategy of complicated Al2O3-Si3N4 functionally graded materials by stereolithography 3D printing
Hongyu Xing et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Multi-Material 3D Printed Shape Memory Polymer with Tunable Melting and Glass Transition Temperature Activated by Heat or Light
Ela Sachyani Keneth et al.
POLYMERS (2020)
Development of a Multi-Material Stereolithography 3D Printing Device
Bilal Khatri et al.
MICROMACHINES (2020)
Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction
Xiaoyan Xu et al.
ADDITIVE MANUFACTURING (2020)
Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography
Alexander Thomas et al.
ACTA BIOMATERIALIA (2020)
Highly Tunable Thiol-Ene Photoresins for Volumetric Additive Manufacturing
Caitlyn C. Cook et al.
ADVANCED MATERIALS (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Multi-material microstereolithography using a palette with multicolor photocurable resins
Taiki Maruyama et al.
OPTICAL MATERIALS EXPRESS (2020)
Xolography for linear volumetric 3D printing
Martin Regehly et al.
NATURE (2020)
A Virtual Issue of Applied Polymer Materials: 3D Printing of Polymers
Bryan D. Vogt
ACS APPLIED POLYMER MATERIALS (2020)
Projection micro stereolithography based 3D printing and its applications
Qi Ge et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)
Charge-programmed three-dimensional printing for multi-material electronic devices
Ryan Hensleigh et al.
NATURE ELECTRONICS (2020)
Oxygen Tolerant PET-RAFT Facilitated 3D Printing of Polymeric Materials under Visible LEDs
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2020)
3D printing of polymeric materials based on photo-RAFT polymerization
Ali Bagheri et al.
POLYMER CHEMISTRY (2020)
Volumetric additive manufacturing via tomographic reconstruction
Brett E. Kelly et al.
SCIENCE (2019)
Multimaterial actinic spatial control 3D and 4D printing
J. J. Schwartz et al.
NATURE COMMUNICATIONS (2019)
Piezoelectric microphone via a digital light processing 3D printing process
Benjamin Tiller et al.
MATERIALS & DESIGN (2019)
Multimaterial 3D laser microprinting using an integrated microfluidic system
Frederik Mayer et al.
SCIENCE ADVANCES (2019)
Grayscale digital light processing 3D printing for highly functionally graded materials
Xiao Kuang et al.
SCIENCE ADVANCES (2019)
110th Anniversary: Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design
Gayan A. Appuhamillage et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Automated storage and active cleaning for multi-material digital-light-processing printer
Christopher-Denny Matte et al.
RAPID PROTOTYPING JOURNAL (2019)
Fabrication of 3D conjugated polymer structures via vat polymerization additive manufacturing
Andrew T. Cullen et al.
SMART MATERIALS AND STRUCTURES (2019)
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Pamela Robles-Martinez et al.
PHARMACEUTICS (2019)
Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control
Daehoon Han et al.
ADDITIVE MANUFACTURING (2019)
Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds
Paulina Nunez Bernal et al.
ADVANCED MATERIALS (2019)
Miniature Pneumatic Actuators for Soft Robots by High-Resolution Multimaterial 3D Printing
Yuan-Fang Zhang et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization
Zhiheng Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
David A. Walker et al.
SCIENCE (2019)
Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response
Huachen Cui et al.
NATURE MATERIALS (2019)
Biphasic osteochondral scaffold fabrication using multi-material mask projection stereolithography
Xiangquan Wu et al.
RAPID PROTOTYPING JOURNAL (2019)
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
Martin P. de Beer et al.
SCIENCE ADVANCES (2019)
A facile multi-material direct laser writing strategy
Andrew C. Lamont et al.
LAB ON A CHIP (2019)
Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing
Jeremy Odent et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Photopolymerization in 3D Printing
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2019)
Solution Mask Liquid Lithography (SMaLL) for One-Step, Multimaterial 3D Printing
Neil D. Dolinski et al.
ADVANCED MATERIALS (2018)
Novel Materials for 3D Printing by Photopolymerization
Michael Layani et al.
ADVANCED MATERIALS (2018)
Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting
Amir K. Miri et al.
ADVANCED MATERIALS (2018)
Kinematic fixtures to enable multi-material printing and rapid non-destructive inspection during two-photon lithography
Sourabh K. Saha et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Multi-material Additive Manufacturing of Metamaterials with Giant, Tailorable Negative Poisson's Ratios
Da Chen et al.
SCIENTIFIC REPORTS (2018)
Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing
Biao Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
Digital Manufacturing of Selective Porous Barriers in Microchannels Using Multi-Material Stereolithography
Yong Tae Kim et al.
MICROMACHINES (2018)
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Tobias Grix et al.
GENES (2018)
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Daehoon Han et al.
SCIENTIFIC REPORTS (2018)
High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing
Kavin Kowsari et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
Three-dimensional direct laser written achromatic axicons and multi-component microlenses
Michael Schmid et al.
OPTICS LETTERS (2018)
Orthogonal programming of heterogeneous micro-mechano-environments and geometries in three-dimensional bio-stereolithography
Hang Yin et al.
NATURE COMMUNICATIONS (2018)
3D printing a mechanically-tunable acrylate resin on a commercial DLP-SLA printer
Joseph Borrello et al.
ADDITIVE MANUFACTURING (2018)
Photoinitiating systems for cationic photopolymerization: Ongoing push toward long wavelengths and low light intensities
Suqing Shi et al.
PROGRESS IN POLYMER SCIENCE (2017)
Porous polymeric materials by 3D printing of photocurable resin
X. Mu et al.
MATERIALS HORIZONS (2017)
Living Additive Manufacturing: Transformation of Parent Gels into Diversely Functionalized Daughter Gels Made Possible by Visible Light Photoredox Catalysis
Mao Chen et al.
ACS CENTRAL SCIENCE (2017)
One-step volumetric additive manufacturing of complex polymer structures
Maxim Shusteff et al.
SCIENCE ADVANCES (2017)
Digital light processing 3D printing of conductive complex structures
Quanyi Mu et al.
ADDITIVE MANUFACTURING (2017)
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Carl J. Thrasher et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Cleaving Direct-Laser-Written Microstructures on Demand
Markus M. Zieger et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
3D PRINTING Additive manufacturing of polymer-derived ceramics
Zak C. Eckel et al.
SCIENCE (2016)
High-Resolution Projection Microstereolithography for Patterning of Neovasculature
Ritu Raman et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Production of Materials with Spatially-Controlled Cross-Link Density via Vat Photopolymerization
Gregory I. Peterson et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Erika Fantino et al.
ADVANCED MATERIALS (2016)
Adding Biomolecular Recognition Capability to 3D Printed Objects
Celine A. Mandon et al.
ANALYTICAL CHEMISTRY (2016)
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Qiming Wang et al.
PHYSICAL REVIEW LETTERS (2016)
Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production
Ashley R. Johnson et al.
PLOS ONE (2016)
Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation
Alessandra Vitale et al.
MATERIALS (2016)
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Qi Ge et al.
SCIENTIFIC REPORTS (2016)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays
Yanfeng Lu et al.
BIOFABRICATION (2015)
Photopolymer Materials and Processes for Advanced Technologies
James V. Crivello et al.
CHEMISTRY OF MATERIALS (2014)
Development of DMD-based micro-stereolithography apparatus for biodegradable multi-material micro-needle fabrication
Haeyong Yun et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
Digital material fabrication using mask-image-projection-based stereolithography
Chi Zhou et al.
RAPID PROTOTYPING JOURNAL (2013)
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Vincent Chan et al.
LAB ON A CHIP (2012)
Multi-material, multi-technology stereolithography This feature article covers a decade of research into tackling one of the major challenges of the stereolithography technique, which is including multiple materials in one construct
Ryan B. Wicker et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2012)
Stereolithography-Based Hydrogel Microenvironments to Examine Cellular Interactions
Pinar Zorlutuna et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture
Franziska Klein et al.
ADVANCED MATERIALS (2011)
Multi-material stereolithography
Jae-Won Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Fabrication of Off-the-Shelf Multilumen Poly(Ethylene Glycol) Nerve Guidance Conduits Using Stereolithography
Karina Arcaute et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Karina Arcaute et al.
ACTA BIOMATERIALIA (2010)
Thiol-Ene Click Chemistry
Charles E. Hoyle et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering
Li-Hsin Han et al.
BIOMEDICAL MICRODEVICES (2010)
Multi-material microstereolithography
Jae-Won Choi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Slice overlap-detection algorithm for process planning in multiple-material stereolithography
Ho-Chan Kim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation
Vincent Chan et al.
LAB ON A CHIP (2010)
Scheduling and process planning for multiple material stereolithography
Hochan Kim et al.
RAPID PROTOTYPING JOURNAL (2010)
Fully three-dimensional microfabrication with a grayscale polymeric self-sacrificial structure
Chunguang Xia et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds
Y Lu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells
Karina Arcaute et al.
ANNALS OF BIOMEDICAL ENGINEERING (2006)
Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds
G Mapili et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)