相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Enhanced chondrogenic phenotype of primary bovine articular chondrocytes in Fibrin-Hyaluronan hydrogel by multi-axial mechanical loading and FGF18
Bernardo P. Antunes et al.
ACTA BIOMATERIALIA (2020)
Influence of the morphology and viscoelasticity on the thermomechanical properties of poly(lactic acid)/thermoplastic polyurethane blends compatibilized with ethylene-ester copolymer
Giordano Pierozan Bernardes et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
A viscoelastic PEGylated poly(glycerol sebacate)-based bilayer scaffold for cartilage regeneration in full-thickness osteochondral defect
Dan Lin et al.
BIOMATERIALS (2020)
Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs
Xiangyu Liang et al.
BIOFABRICATION (2019)
Tuning the biomimetic behavior of scaffolds for regenerative medicine through surface modifications
Nathan R. Richbourg et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Viscoelasticity in natural tissues and engineered scaffolds for tissue reconstruction
Danyang Huang et al.
ACTA BIOMATERIALIA (2019)
Viscoelasticity and histology of the human cartilage in healthy and degenerated conditions of the knee
Michael Seidenstuecker et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2019)
Targeted delivery of FGF2 to subchondral bone enhanced the repair of articular cartilage defect
Wenyu Yang et al.
ACTA BIOMATERIALIA (2018)
Tougher biodegradable polylactide system for bone fracture fixations: Miscibility study, phase morphology and mechanical properties
J. M. Ugartemendia et al.
EUROPEAN POLYMER JOURNAL (2018)
A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility
Yong He et al.
BIOMED RESEARCH INTERNATIONAL (2018)
3D printed biofunctionalized scaffolds for microfracture repair of cartilage defects
Ting Guo et al.
BIOMATERIALS (2018)
3D Bioprinting for Tissue and Organ Fabrication
Yu Shrike Zhang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Strong synergistic effects in PLA/PCL blends: Impact of PIA matrix viscosity
Aleksandra Ostafinska et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Viscoelasticity of articular cartilage: Analysing the effect of induced stress and the restraint of bone in a dynamic environment
Bernard M. Lawless et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller localization on structure and properties
Ivan Kelnar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Mechanical, thermal and morphological characterisation of 3D porous Pennisetum purpureum/PLA biocomposites scaffold
R. Revati et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Mechanical confinement regulates cartilage matrix formation by chondrocytes
Hong-pyo Lee et al.
NATURE MATERIALS (2017)
Morphology, rheological and crystallization behavior in thermoplastic polyurethane toughed poly(L-lactide) with stereocomplex crystallites
Yu-Dong Shi et al.
POLYMER TESTING (2017)
Evidences of non-linear short-term stress relaxation in polymers
Alessandro Schiavi et al.
POLYMER TESTING (2017)
Enhanced Cartilaginous Tissue Formation with a Cell Aggregate-Fibrin-Polymer Scaffold Complex
Soojin Lee et al.
POLYMERS (2017)
New approach to morphological control for polypropylene/polyethylene blends via magnetic self-organization
Yu-Dong Shi et al.
MATERIALS & DESIGN (2017)
3D bioprinting of urethra with PCL/PLCL blend and dual autologous cells in fibrin hydrogel: An in vitro evaluation of biomimetic mechanical property and cell growth environment
Kaile Zhang et al.
ACTA BIOMATERIALIA (2017)
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Ovijit Chaudhuri et al.
NATURE MATERIALS (2016)
3D bioprinting for engineering complex tissues
Christian Mandrycky et al.
BIOTECHNOLOGY ADVANCES (2016)
Evaluation of the Early In Vivo Response of a Functionally Graded Macroporous Scaffold in an Osteochondral Defect in a Rabbit Model
Valerie Barron et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
TGF-β3 encapsulated PLCL scaffold by a supercritical CO2-HFIP co-solvent system for cartilage tissue engineering
Su Hee Kim et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Dynamic mechanical properties of PLA/PHBV, PLA/PCL, PHBV/PCL blends and their nanocomposites with TiO2 as nanofiller
J. P. Mofokeng et al.
THERMOCHIMICA ACTA (2015)
Substrate stress relaxation regulates cell spreading
Ovijit Chaudhuri et al.
NATURE COMMUNICATIONS (2015)
Heparinized PLLA/PLCL nanofibrous scaffold for potential engineering of small-diameter blood vessel: Tunable elasticity and anticoagulation property
Weizhong Wang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
Engineering bone tissue using human dental pulp stem cells and an osteogenic collagen-hydroxyapatite-poly (L-lactide-co-ε-caprolactone) scaffold
Adil Akkouch et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Effects of compatibility of poly(L-lactic-acid) and thermoplastic polyurethane on mechanical property of blend fiber
Dan-Ying Zuo et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2014)
Biphasic Nanofibrous Constructs with Seeded Cell Layers for Osteochondral Repair
Guang-Zhen Jin et al.
TISSUE ENGINEERING PART C-METHODS (2014)
Poly (L-lactide-co-caprolactone) scaffolds enhanced with poly (β-hydroxybutyrateco-β-hydroxyvalerate) microspheres for cartilage regeneration
Chao Li et al.
BIOMEDICAL MATERIALS (2013)
Highly efficient toughening effect of ultrafine full-vulcanized powdered rubber on poly(lactic acid)(PLA)
Qinna Zhao et al.
POLYMER TESTING (2013)
Electrospun collagen-poly(l-lactic acid-co-ε-caprolactone) membranes for cartilage tissue engineering
Xiaomin He et al.
REGENERATIVE MEDICINE (2013)
A Biocompatible Tissue Scaffold Produced by Supercritical Fluid Processing for Cartilage Tissue Engineering
Su Hee Kim et al.
TISSUE ENGINEERING PART C-METHODS (2013)
Composite System of PLCL Scaffold and Heparin-Based Hydrogel for Regeneration of Partial-Thickness Cartilage Defects
Mihye Kim et al.
BIOMACROMOLECULES (2012)
Preparation of Poly(ε-caprolactone)/Poly(ε-caprolactone-co-lactide) (PCL/PLCL) Blend Filament by Melt Spinning
Bhuvanesh Gupta et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Improved Mesenchymal Stem Cells Attachment and In Vitro Cartilage Tissue Formation on Chitosan-Modified Poly(L-Lactide-co-Epsilon-Caprolactone) Scaffold
Zheng Yang et al.
TISSUE ENGINEERING PART A (2012)
The Effect of Hybridization of Hydrogels and Poly(L-lactide-co-epsilon-caprolactone) Scaffolds on Cartilage Tissue Engineering
Youngmee Jung et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2010)
Articular cartilage tissue engineering based on a mechano-active scaffold made of poly(L-lactide-co-ε-caprolactone): In vivo performance in adult rabbits
Jun Xie et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
The rheological characterization of linear viscoelasticity for ink jet fluids using piezo axial vibrator and torsion resonator rheometers
D. C. Vadillo et al.
JOURNAL OF RHEOLOGY (2010)
Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering
Sio-Mei Lien et al.
ACTA BIOMATERIALIA (2009)
Improvement in toughness of poly(L-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene copolymer (ABS): Morphology and properties
Yongjin Li et al.
EUROPEAN POLYMER JOURNAL (2009)
Melt rheology and die swell of PA6/LDPE blends by using lithium ionomer as a compatibilizer
Wachiraphon Sinthavathavorn et al.
POLYMER BULLETIN (2009)
Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing
Francesca Signori et al.
POLYMER DEGRADATION AND STABILITY (2009)
Cartilage regeneration with highly-elastic three-dimensional scaffolds prepared from biodegradable poly(L-lactide-co-ε-caprolactone)
Youngmee Jung et al.
BIOMATERIALS (2008)
Application of an elastic biodegradable poly(L-lactide-co-epsilon-caprolactone) scaffold for cartilage tissue regeneration
Youngmee Jung et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2008)
Preparation and characterization of thermoplastic starch/PLA blends by one-step reactive extrusion
Ning Wang et al.
POLYMER INTERNATIONAL (2007)
Fast degradable poly(L-lactide-co-ε-caprolactone) microspheres for tissue engineering:: Synthesis, characterization, and degradation behavior
Kalpna Garkhal et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2007)
Prediction of the optimal mechanical properties for a scaffold used in osteochondral defect repair
Daniel J. Kelly et al.
TISSUE ENGINEERING (2006)
Mechano-active scaffold design based on microporous poly(L-lactide-co-ε-caprolactone) for articular cartilage tissue engineering:: Dependence of porosity on compression force-applied mechanical behaviors
J Xie et al.
TISSUE ENGINEERING (2006)
Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites
RW Zong et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2005)
Mechano-active tissue engineering of vascular smooth muscle using pulsatile perfusion bioreactors and elastic PLCL scaffolds
SI Jeong et al.
BIOMATERIALS (2005)
Manufacture of elastic biodegradable PLCL scaffolds for mechano-active vascular tissue engineering
SI Jeong et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2004)