相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Optimization of patterned-fins for enhancing charging performances of phase change materials-based thermal energy storage systems
Benli Peng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Fast estimation of the enthalpy-temperature function of Phase Change Materials
Jean-Luc Dauvergne et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)
Performance analysis of a vertically oriented concentric-tube PCM based thermal energy storage system: Parametric study and correlation development
Kedumese U. Mekrisuh et al.
RENEWABLE ENERGY (2020)
Study on the effect of multiple spiral fins for improved phase change process
Juan Duan et al.
APPLIED THERMAL ENGINEERING (2020)
Performance assessment of residential building envelopes enhanced with phase change materials
Viven Sharma et al.
ENERGY AND BUILDINGS (2020)
Hybrid thermal energy storage with phase change materials for solar domestic hot water applications: Direct versus indirect heat exchange systems
M. Y. Abdelsalam et al.
RENEWABLE ENERGY (2020)
Modeling, transient simulations and parametric studies of parabolic trough collectors with thermal energy storage
Tufan Akba et al.
SOLAR ENERGY (2020)
Numerical study of melting-process of a non-Newtonian fluid inside a metal foam
S. A. M. Mehryan et al.
ALEXANDRIA ENGINEERING JOURNAL (2020)
Analysis of the thermal response of a dual phase change material embedded in a multi-layered building envelope
Yahia Abdelhamid Lakhdari et al.
APPLIED THERMAL ENGINEERING (2020)
Performance enhancement of a phase-change-material based thermal energy storage device for air-conditioning applications
Binjian Nie et al.
ENERGY AND BUILDINGS (2020)
Melting performance analysis of phase change materials in different finned thermal energy storage
Shengqi Zhang et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical investigation of an innovative discontinuous distribution of fins for solidification rate enhancement in PCM with and without nanoparticles
I Sarani et al.
APPLIED THERMAL ENGINEERING (2020)
Revisiting melting heat transfer of nano-enhanced phase change materials (NePCM) in differentially-heated rectangular cavities using thermochromic liquid crystal (TLC) thermography
Zi-Rui Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Effect of phase change material plates' arrangements on charging and discharging of energy storage in building air free cooling
Sameh A. Nada et al.
ENERGY STORAGE (2020)
Composite phase change materials with heat transfer self-enhancement for thermal energy storage
Xinchen Zhou et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Experimental investigation of thermal conductivity enhancement of carbon foam saturated with PCM and PCM/MWCNTs composite for energy storage systems
S. A. Nada et al.
HEAT AND MASS TRANSFER (2019)
Precise integration boundary element method for solving dual phase change problems based on the effective heat capacity model
Wei-An Yao et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2019)
Thermal characteristics and energy saving of charging/discharging processes of PCM in air free cooling with minimal temperature differences
S. A. Nada et al.
ALEXANDRIA ENGINEERING JOURNAL (2019)
Theoretical modeling and optimization of fin-based enhancement of heat transfer into a phase change material
Amirhossein Mostafavi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Thermal performance analysis and optimization of a cascaded packed bed cool thermal energy storage unit using multiple phase change materials
Xiwen Cheng et al.
APPLIED ENERGY (2018)
Potential of cascaded phase change materials in enhancing the performance of solar domestic hot water systems
H. M. Teamah et al.
SOLAR ENERGY (2018)
Parametric study on the effect of using cold thermal storage energy of phase change material on the performance of air-conditioning unit
M. A. Said et al.
APPLIED ENERGY (2018)
A review on macro-encapsulated phase change material for building envelope applications
Zhengxuan Liu et al.
BUILDING AND ENVIRONMENT (2018)
Numerical investigation of rectangular thermal energy storage units with multiple phase change materials
S. Hoseinzadeh et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Heat transfer enhancement of double pipe heat exchanger using rotating of variable eccentricity inner pipe
Marwa A. M. Ali et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
An experimental investigation of using carbon foam-PCM-MWCNTs composite materials for thermal management of electronic devices under pulsed power modes
W. G. Alshaer et al.
HEAT AND MASS TRANSFER (2017)
A numerical investigation of melting phase change process via the enthalpy porosity approach: Application to hydrated salts
Zohir Younsi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)
Enthalpy porosity model for melting and solidification of pure-substances with large difference in phase specific heats
Prodyut R. Chakraborty
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)
Modeling of heat capacity peaks and enthalpy jumps of phase-change materials used for thermal energy storage
Igor Medved et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
An alternative approach for assessing the benefit of phase change materials in solar domestic hot water systems
H. M. Teamah et al.
SOLAR ENERGY (2017)
Nano-PCMs for enhanced energy storage and passive cooling applications
Laura Colla et al.
APPLIED THERMAL ENGINEERING (2017)
Heat retention of a photovoltaic/thermal collector with PCM
Maria C. Browne et al.
SOLAR ENERGY (2016)
Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment
W. G. Alshaer et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems
S. A. Nada et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Selection and performance assessment of Phase Change Materials for heating, ventilation and air-conditioning applications
Monisha Rastogi et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Melting performance enhancement in latent heat storage module using solid extraction electrohydrodynamics (EHD)
David Nakhla et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Thermal management of electronic devices using carbon foam and PCM/nano-composite
W. G. Alshaer et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams
Simone Mancin et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Phase change materials for photovoltaic thermal management
M. C. Browne et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Simulation of melting of a nano-enhanced phase change material (NePCM) in a square cavity with two heat source-sink pairs
Aziz Ebrahimi et al.
ALEXANDRIA ENGINEERING JOURNAL (2015)
Performance investigation of thermal energy storage system with Phase Change Material (PCM) for solar water heating application
M. H. Mahfuz et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)
Phase-change materials to improve solar panel's performance
Pascal Henry Biwole et al.
ENERGY AND BUILDINGS (2013)
Phase change material for enhancing solar water heater, an experimental approach
Mohammad Ali Fazilati et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
An effectiveness study of enhanced heat transfer in phase change materials (PCMs)
X. X. Han et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Phase change material (PCM) storage for free cooling of buildings-A review
Adeel Waqas et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
A review on phase change cold storage in air-conditioning system: Materials and applications
X. Q. Zhai et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials
Y. Q. Li et al.
RENEWABLE ENERGY (2013)
Review on phase change materials (PCMs) for cold thermal energy storage applications
E. Oro et al.
APPLIED ENERGY (2012)
Review of cold storage materials for air conditioning application
Gang Li et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2012)
A review of intercalation composite phase change material: Preparation, structure and properties
Min Li et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Modeling of phase change materials for applications in whole building simulation
Parham A. Mirzaei et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material
Shuangmao Wu et al.
ENERGY AND BUILDINGS (2011)
Recent developments in enhanced heat transfer
Arthur E. Bergles
HEAT AND MASS TRANSFER (2011)
Energy storage and solidification of paraffin phase change material embedded with graphite nanofibers
Omar Sanusi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Materials used as PCM in thermal energy storage in buildings: A review
L. F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
A review on phase-change materials: Mathematical modeling and simulations
Yvan Dutil et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Development of phase change materials based microencapsulated technology for buildings: A review
V. V. Tyagi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
PCM storage for solar DHW: From an unfulfilled promise to a real benefit
T. Kousksou et al.
SOLAR ENERGY (2011)
Energy balance model of combined photovoltaic solar-thermal system incorporating phase change material
C. S. Malvi et al.
SOLAR ENERGY (2011)
Heat transfer performance analysis of a solar flat-plate collector with an integrated metal foam porous structure filled with paraffin
Zhenqian Chen et al.
APPLIED THERMAL ENGINEERING (2010)
Phase change materials for building applications: A state-of-the-art review
Ruben Baetens et al.
ENERGY AND BUILDINGS (2010)
Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems
I. Al-Hinti et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Conventional versus storage domestic solar hot water systems: A comparative performance study
Abdul Jabbar N. Khalifa et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Forecasting of thermal energy storage performance of Phase Change Material in a solar collector using soft computing techniques
Yasin Varol et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)
State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization
Antoni Gil et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
Francis Agyenim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Preparation, characterization and thermal properties of lauric acid/expanded perlite as novel form-stable composite phase change material
Ahmet Sari et al.
CHEMICAL ENGINEERING JOURNAL (2009)
Numerical analysis of a coupled solar collector latent heat storage unit using various phase change materials for heating the water
Hamid El Qarnia
ENERGY CONVERSION AND MANAGEMENT (2009)
Performance enhancement in latent heat thermal storage system: A review
S. Jegadheeswaran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage
Ahmet Sari et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Modeling of an integrated solar system
Marwa M. Hassan et al.
BUILDING AND ENVIRONMENT (2008)
Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector
Ahmet Koca et al.
RENEWABLE ENERGY (2008)
PCM storage for solar DHW: An unfulfilled promise?
Ella Talmatsky et al.
SOLAR ENERGY (2008)
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
R. V. Seeniraj et al.
SOLAR ENERGY (2008)
Cascaded latent heat storage for parabolic trough solar power plants
Horst Michels et al.
SOLAR ENERGY (2007)
Effect of multiple phase change materials (PCMs) slab configurations on thermal energy storage
S Shaikh et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
Performance of a two-phase closed thermosyphon solar collector with a shell and tube heat exchanger
SA Nada et al.
APPLIED THERMAL ENGINEERING (2004)
A review on phase change energy storage: materials and applications
MM Farid et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
Some fatty acids used for latent heat storage: thermal stability and corrosion of metals with respect to thermal cycling
A San et al.
RENEWABLE ENERGY (2003)
The effect of temperature on the power drop in crystalline silicon solar cells
E Radziemska
RENEWABLE ENERGY (2003)