Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion

Improvement of corrosion resistance of austenitic 316L stainless steel via laser powder bed fusion (LPBF) is currently a prominent research topic; however, the effects of crystallographic texture and the related grain boundary density on the corrosion resistance of LPBF-fabricated parts have not been elucidated. For biomedical applications, crystallographic texture control from a single crystalline-like to randomly oriented polycrystalline microstructure is highly attractive for optimizing the mechanical properties (particularly the Young's modulus) of implants. An investigation of the impacts of crystallographic planes and grain boundaries exposed to the biological environment on corrosion behavior is necessary. 316L stainless steels with different crystallographic textures and grain boundary densities were successfully fabricated via LPBF. The corrosion resistances of the LPBF-fabricated specimens were comprehensively assessed by anodic polarization, dissolution, and crevice corrosion repassivation tests. The LPBF-fabricated specimens showed extremely high pitting potentials in the physiological saline compared with the commercially available counterparts, and importantly, excellent pitting corrosion resistance was observed irrespective of the crystallographic planes and grain boundary density exposed. Moreover, the LPBF-fabricated specimens did not show metastable pitting corrosion even in an accelerated test using an acid solution. The repassivation behavior of the specimens was not affected by LPBF. Such a drastic improvement in the corrosion resistances of the LPBF-fabricated specimens might be attributed to suppression of inclusion coarsening owing to the rapid cooling rate during solidification in LPBF. By using LPBF, the desired crystallographic texture can be introduced based on the desired mechanical properties without concern for corrosiveness.

Automated summary

The study investigated the impact of crystallographic texture and grain boundary density on the corrosion resistance of LPBF-fabricated 316L stainless steel parts. The results showed that the LPBF-fabricated specimens exhibited extremely high pitting potentials and excellent corrosion resistance in physiological saline, regardless of the crystallographic planes and grain boundary density exposed. The drastic improvement in corrosion resistance of the LPBF-fabricated specimens could be attributed to suppression of inclusion coarsening due to rapid cooling rates during solidification in LPBF.