相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Oral preparations with tunable dissolution behavior based on selective laser sintering technique
Yan Yang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D-printing of lopinavir printlets by selective laser sintering and quantification of crystalline fraction by XRPD-chemometric models
Rania Hamed et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Selective Laser Sintering of Solid Oral Dosage Forms with Copovidone and Paracetamol Using a CO2 Laser
Yanis A. Gueche et al.
PHARMACEUTICS (2021)
Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines
Sylvain Cailleaux et al.
JOURNAL OF CONTROLLED RELEASE (2021)
Selective Laser Sintering 3-Dimensional Printing as a Single Step Process to Prepare Amorphous Solid Dispersion Dosage Forms for Improved Solubility and Dissolution Rate
Daniel A. Davis et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Advances in powder bed fusion 3D printing in drug delivery and healthcare
Atheer Awad et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Gender-related differences in heart failure: beyond the one-size-fits-all paradigm
Annamaria De Bellis et al.
HEART FAILURE REVIEWS (2020)
Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres
Shan-Shan Liu et al.
CERAMICS INTERNATIONAL (2020)
One Size Fits All? Application of Susceptible-Dose-Dependent Breakpoints to Pediatric Patients and Laboratory Reporting
Lindsey E. Nielsen et al.
JOURNAL OF CLINICAL MICROBIOLOGY (2020)
Phase-field-model-based analysis of the effects of powder particle on porosities and densities in selective laser sintering additive manufacturing
Z. Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Non-destructive dose verification of two drugs within 3D printed polyprintlets
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Development of 3D Printed Tablets by Fused Deposition Modeling Using Polyvinyl Alcohol as Polymeric Matrix for Rapid Drug Release
Can Wei et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Enabling Technologies for Personalized and Precision Medicine
Dean Ho et al.
TRENDS IN BIOTECHNOLOGY (2020)
3D Printed Tablets (Printlets) with Braille and Moon Patterns for Visually Impaired Patients
Atheer Awad et al.
PHARMACEUTICS (2020)
Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron
Nour Allahham et al.
PHARMACEUTICS (2020)
Semi-solid extrusion 3D printing ODFs: an individual drug delivery system for small scale pharmacy
Ting-Ting Yan et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Selective laser sintering 3D printing - an overview of the technology and pharmaceutical applications
Naseem A. Charoo et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Therapy for the individual: Towards patient integration into the manufacturing and provision of pharmaceuticals
Rydvikha Govender et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)
Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology
Eman M. Mohamed et al.
AAPS PHARMSCITECH (2020)
Recent Progress on Polymer Materials for Additive Manufacturing
Lisa Jiaying Tan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
3D printing of PVA capsular devices for modified drug delivery: design and in vitro dissolution studies
Ivana Cotabarren et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Preparation and characterization of polypills containing aspirin and simvastatin using 3D printing technology for the prevention of cardiovascular diseases
Niloufar Keikhosravi et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
3D Printing of Tunable Zero-Order Release Printlets
Fabrizio Fina et al.
POLYMERS (2020)
Exploring tablet design options for tailoring drug release and dose via fused deposition modeling (FDM) 3D printing
Guluzar Gorkem Buyukgoz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
Patricija Januskaite et al.
PHARMACEUTICS (2020)
The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations-printability-process modulation, with consecutive effects on in vitro release, stability and degradation
Kinga Ilyes et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen
Siddhant Palekar et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Camden A. Chatham et al.
PROGRESS IN POLYMER SCIENCE (2019)
The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
Maisa R. P. Araujo et al.
PHARMACEUTICS (2019)
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Atheer Awad et al.
PHARMACEUTICS (2019)
3D Printing of Metformin HCl PVA Tablets by Fused Deposition Modeling: Drug Loading, Tablet Design, and Dissolution Studies
Mariam Ibrahim et al.
AAPS PHARMSCITECH (2019)
Drop-On-Powder 3D Printing of Tablets with an Anti-Cancer Drug, 5-Fluorouracil
Kejing Shi et al.
PHARMACEUTICS (2019)
Making Medicines Baby Size: The Challenges in Bridging the Formulation Gap in Neonatal Medicine
Fiona O'Brien et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Pamela Robles-Martinez et al.
PHARMACEUTICS (2019)
Understanding the effects of formulation and process variables on the printlets quality manufactured by selective laser sintering 3D printing
Sogra F. Barakh Ali et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Powder bed 3D-printing of highly loaded drug delivery devices with hydroxypropyl cellulose as solid binder
Sophia Infanger et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Exploration and Preparation of a Dose-Flexible Regulation System for Levetiracetam Tablets via Novel Semi-Solid Extrusion Three-Dimensional Printing
Mengsuo Cui et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Polymeric composites for powder-based additive manufacturing: Materials and applications
Shangqin Yuan et al.
PROGRESS IN POLYMER SCIENCE (2019)
3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction
Carolin Korte et al.
AAPS PHARMSCITECH (2018)
Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
Basel Arafat et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release
Yan Yang et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
From 'fixed dose combinations' to 'a dynamic dose combiner': 3D printed bi-layer antihypertensive tablets
Muzna Sadia et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Characterisation of pore structures of pharmaceutical tablets: A review
Daniel Markl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Muzna Sadia et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Female psychopharmacology matters! Towards a sex-specific psychopharmacology
Blanca Bolea-Alamanac et al.
JOURNAL OF PSYCHOPHARMACOLOGY (2018)
Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
Jehad M. Nasereddin et al.
PHARMACEUTICAL RESEARCH (2018)
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Sarah J. Trenfield et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2018)
Critical review of the safety assessment of titanium dioxide additives in food
Hans Christian Winkler et al.
JOURNAL OF NANOBIOTECHNOLOGY (2018)
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Additive Manufacturing of PE/fluorouracil/progesterone intrauterine device for endometrial and ovarian cancer treatments
G. V. Salmoria et al.
POLYMER TESTING (2018)
3D Printing in Personalized Drug Delivery
Afsana et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
In-process measurement and monitoring of a polymer laser sintering powder bed with fringe projection
Nicholas Southon et al.
MATERIALS & DESIGN (2018)
A Critical Review on 3D-printed Dosage Forms
Ilias El Aita et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Pamela Robles Martinez et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
Mary Kyobula et al.
JOURNAL OF CONTROLLED RELEASE (2017)
A Review of Disintegration Mechanisms and Measurement Techniques
Daniel Markl et al.
PHARMACEUTICAL RESEARCH (2017)
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
Jun Hao Tan et al.
ADDITIVE MANUFACTURING (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
A novel hot-melt extrusion formulation of albendazole for increasing dissolution properties
Laura Martinez-Marcos et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Patient centric formulations for paediatrics and geriatrics: Similarities and differences
Sara M. Hanning et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Solubility Advantage (and Disadvantage) of Pharmaceutical Amorphous Solid Dispersions
Siyuan Huang et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
PCL/Ibuprofen Implants Fabricated by Selective Laser Sintering for Orbital Repair
G. V. Salmoria et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
Reduction of the residual porosity in parts manufactured by selective laser melting using skywriting and high focus offset strategies
A. M. Mancisidor et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Katarzyna Pietrzak et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Evaluation of the influences of process parameters while selective laser sintering PMMA powders
Rajkumar Velu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2015)
Polymer Powders for Selective Laser Sintering (SLS)
Manfred Schmid et al.
PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (2015)
The effects of laser energy density and particle size in the selective laser sintering of polycaprolactone/progesterone specimens: morphology and drug release
Gean Vitor Salmoria et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties
Gean V. Salmoria et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Selective laser sintering in biomedical engineering
Alida Mazzoli
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2013)
Laser sintering of polyamides and other polymers
R. D. Goodridge et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Development of functionally-graded reservoir of PCL/PG by selective laser sintering for drug delivery devices This paper presents a selective laser sintering-fabricated drug delivery system that contains graded progesterone content
G. V. Salmoria et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2012)
Oral drug delivery in personalized medicine: Unmet needs and novel approaches
Klaus Wening et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Structure and mechanical properties of cellulose based scaffolds fabricated by selective laser sintering
Gean V. Salmoria et al.
POLYMER TESTING (2009)
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
B. Caulfield et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Consolidation phenomena in laser and powder-bed based layered manufacturing
J. -P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Building porous biopolymeric microstructures for controlled drug delivery devices using selective laser sintering
K. F. Leong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Evaluation of CO2 and Nd:YAG lasers for the selective laser sintering of HAPEX®
M. M. Savalani et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications
RD Goodridge et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2006)
Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering
EN Antonov et al.
ADVANCED MATERIALS (2005)
Aging biology and geriatric clinical pharmacology
AJ McLean et al.
PHARMACOLOGICAL REVIEWS (2004)
Sintering of commercially pure titanium powder with a Nd:YAG laser source
P Fischer et al.
ACTA MATERIALIA (2003)
Characterization of microfeatures in selective laser sintered drug delivery devices
CM Cheah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2002)
Characterization of SLS parts for drug delivery devices
KH Low et al.
RAPID PROTOTYPING JOURNAL (2001)
Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique
KF Leong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2001)