相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Donor-π-Acceptor Type Porphyrin Derivatives Assisted Defect Passivation for Efficient Hybrid Perovskite Solar Cells
Chi-Lun Mai et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Dually-Passivated Perovskite Solar Cells with Reduced Voltage Loss and Increased Super Oxide Resistance
Qin Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Excellent quinoline additive in perovskite toward to efficient and stable perovskite solar cells
Guodong Li et al.
JOURNAL OF POWER SOURCES (2021)
High-Quality Ruddlesden-Popper Perovskite Film Formation for High-Performance Perovskite Solar Cells
Pengyun Liu et al.
ADVANCED MATERIALS (2021)
Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering
Yawen Huang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)
Efficient perovskite solar cells via improved carrier management
Jason J. Yoo et al.
NATURE (2021)
Elucidating Mechanisms behind Ambient Storage-Induced Efficiency Improvements in Perovskite Solar Cells
Yongyoon Cho et al.
ACS ENERGY LETTERS (2021)
Spacer Engineering Using Aromatic Formamidinium in 2D/3D Hybrid Perovskites for Highly Efficient Solar Cells
Tingting Liu et al.
ACS NANO (2021)
Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Yuan Cai et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Suppressing Vacancy Defects and Grain Boundaries via Ostwald Ripening for High-Performance and Stable Perovskite Solar Cells
Yuqian Yang et al.
ADVANCED MATERIALS (2020)
Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells
Qin Yao et al.
ADVANCED MATERIALS (2020)
Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
Daehan Kim et al.
SCIENCE (2020)
Spontaneously Self-Assembly of a 2D/3D Heterostructure Enhances the Efficiency and Stability in Printed Perovskite Solar Cells
Jinlong Hu et al.
ADVANCED ENERGY MATERIALS (2020)
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Jiangzhao Chen et al.
ACS ENERGY LETTERS (2020)
Superior Carrier Lifetimes Exceeding 6 μs in Polycrystalline Halide Perovskites
Xiaoyu Yang et al.
ADVANCED MATERIALS (2020)
Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells
Haizhou Lu et al.
SCIENCE (2020)
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Gwisu Kim et al.
SCIENCE (2020)
Single Source, Surfactant-Free, and One-Step Solvothermal Route Synthesized TiO2 Microspheres for Highly Efficient Mesoscopic Perovskite Solar Cells
Guodong Li et al.
SOLAR RRL (2020)
Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency
Fengzhu Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
Nicotinamide as Additive for Microcrystalline and Defect Passivated Perovskite Solar Cells with 21.7% Efficiency
Zhu Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
2D Cs2PbI2Cl2 Nanosheets for Holistic Passivation of Inorganic CsPbI2Br Perovskite Solar Cells for Improved Efficiency and Stability
Shaomin Yang et al.
ADVANCED ENERGY MATERIALS (2020)
Growth of Amorphous Passivation Layer Using Phenethylammonium Iodide for High-Performance Inverted Perovskite Solar Cells
Fan Zhang et al.
SOLAR RRL (2020)
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Ajay Kumar Jena et al.
CHEMICAL REVIEWS (2019)
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Eui Hyuk Jung et al.
NATURE (2019)
Stabilization of Precursor Solution and Perovskite Layer by Addition of Sulfur
Hanul Min et al.
ADVANCED ENERGY MATERIALS (2019)
Dopamine-crosslinked TiO2/perovskite layer for efficient and photostable perovskite solar cells under full spectral continuous illumination
Yiqiang Zhang et al.
NANO ENERGY (2019)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells
Nengxu Li et al.
NATURE ENERGY (2019)
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Tong Zhou et al.
ADVANCED MATERIALS (2019)
4-(Aminoethyl)pyridine as a Bifunctional Spacer Cation for Efficient and Stable 2D Ruddlesden-Popper Perovskite Solar Cells
Yaru Li et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Hao Wang et al.
ADVANCED MATERIALS (2019)
Atomic-Level Microstructure of Efficient Formamidinium-Based Perovskite Solar Cells Stabilized by 5-Ammonium Valeric Acid Iodide Revealed by Multinuclear and Two-Dimensional Solid-State NMR
Anwar Q. Alanazi et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells
Hyeonwoo Kim et al.
ADVANCED ENERGY MATERIALS (2019)
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Maksim Kunitski et al.
NATURE COMMUNICATIONS (2019)
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Rui Wang et al.
SCIENCE (2019)
Stabilizing the Efficiency Beyond 20% with a Mixed Cation Perovskite Solar Cell Fabricated in Ambient Air under Controlled Humidity
Trilok Singh et al.
ADVANCED ENERGY MATERIALS (2018)
Light-Induced Anion Phase Segregation in Mixed Halide Perovskites
Michael C. Brennan et al.
ACS ENERGY LETTERS (2018)
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Peng Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Structural features and their functions in surfactant-armoured methylammonium lead iodide perovskites for highly efficient and stable solar cells
Minsu Jung et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
Lioz Etgar
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Deying Luo et al.
SCIENCE (2018)
Simultaneous Improvement of Photovoltaic Performance and Stability by In Situ Formation of 2D Perovskite at (FAPbI(3))(0.88)(CsPbBr3)(0.12)/CuSCN Interface
Jiangzhao Chen et al.
ADVANCED ENERGY MATERIALS (2018)
FA(0.88)Cs(0.12)PbI(3-x)(PF6)(x) Interlayer Formed by Ion Exchange Reaction between Perovskite and Hole Transporting Layer for Improving Photovoltaic Performance and Stability
Jiangzhao Chen et al.
ADVANCED MATERIALS (2018)
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Jin-Wook Lee et al.
NATURE COMMUNICATIONS (2018)
Engineering Stress in Perovskite Solar Cells to Improve Stability
Nicholas Rolston et al.
ADVANCED ENERGY MATERIALS (2018)
Diboron-Assisted Interfacial Defect Control Strategy for Highly Efficient Planar Perovskite Solar Cells
Yongguang Tu et al.
ADVANCED MATERIALS (2018)
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Silver-Hamill Turren-Cruz et al.
SCIENCE (2018)
2D Ruddlesden-Popper Perovskites for Optoelectronics
Yani Chen et al.
ADVANCED MATERIALS (2018)
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the ACation and XAnion
Ze Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Stabilization of the Metastable Lead Iodide Perovskite Phase via Surface Functionalization
Yongping Fu et al.
NANO LETTERS (2017)
Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells
Woon Seok Yang et al.
SCIENCE (2017)
In situ click chemistry generation of cyclooxygenase-2 inhibitors
Atul Bhardwaj et al.
NATURE COMMUNICATIONS (2017)
Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites
Zhiping Wang et al.
NATURE ENERGY (2017)
Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations
Xiaopeng Zheng et al.
NATURE ENERGY (2017)
Understanding the physical properties of hybrid perovskites for photovoltaic applications
Jinsong Huang et al.
NATURE REVIEWS MATERIALS (2017)
Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells
Jingjing Zhao et al.
SCIENCE ADVANCES (2017)
Metal halide perovskite tandem and multiple-junction photovoltaics
Giles E. Eperon et al.
NATURE REVIEWS CHEMISTRY (2017)
Organometal halide perovskite solar cells: degradation and stability
Taame Abraha Berhe et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells
Hsinhan Tsai et al.
NATURE (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%
Dongqin Bi et al.
NATURE ENERGY (2016)
Stabilization of the Trigonal High-Temperature Phase of Formamidinium Lead Iodide
Andreas Binek et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Yaowen Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals
Qingfeng Dong et al.
SCIENCE (2015)
Parameters Affecting I-V Hysteresis of CH3NH3PbI3 Perovskite Solar Cells: Effects of Perovskite Crystal Size and Mesoporous TiO2 Layer
Hui-Seon Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)