4.6 Article

High-Brightness Perovskite Light-Emitting Diodes Based on FAPbBr3 Nanocrystals with Rationally Designed Aromatic Ligands

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Physical

Metal halide perovskites for light-emitting diodes

Xiao-Ke Liu et al.

Summary: Perovskite emitters have shown promising optoelectronic properties suitable for light-emitting applications, with rapid progress in the development of PeLEDs reaching external quantum efficiencies of over 20%. The key focus is on improving the performance, stability, and reducing toxicity hazards of PeLEDs.

NATURE MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport

Tao Fang et al.

Summary: This study demonstrates green perovskite QLEDs with improved efficiency and operational lifetime by balancing charge injection, showing high color saturation and excellent external quantum efficiency. Modulating charge balance significantly enhances the operational lifetime of the devices, further highlighting the potential of perovskite QLEDs for practical applications.

SCIENCE BULLETIN (2021)

Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

Article Chemistry, Physical

Highly Luminescent and Stable CsPbI3 Perovskite Nanocrystals with Sodium Dodecyl Sulfate Ligand Passivation for Red-Light-Emitting Diodes

Jibin Zhang et al.

Summary: This study introduces stable and highly luminescent black-phase CsPbI3 nanocrystals passivated by novel ligands of sodium dodecyl sulfate (SDS), which exhibit significantly reduced surface defects, enhanced stability, and superior photoluminescence efficiency. Red perovskite light-emitting diodes based on the SDS-CsPbI3 nanocrystals achieve an external quantum efficiency of 8.4%, showing a 4-fold improvement compared to devices using oleic acid-modified CsPbI3 nanocrystals.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Multidisciplinary Sciences

Ligand-engineered bandgap stability in mixed-halide perovskite LEDs

Yasser Hassan et al.

Summary: By utilizing multidentate ligands to treat mixed-halide perovskite nanocrystals, efficient and color-stable red electroluminescence with a wavelength centered at 620 nanometers and an external quantum efficiency of 20.3% has been achieved. The key function of the ligand treatment is to 'clean' the nanocrystal surface by removing lead atoms, which suppresses the formation of iodine Frenkel defects and halide segregation. This work demonstrates the sensitivity of metal halide perovskites to surface properties and provides a pathway to control surface defect formation and migration, crucial for achieving bandgap stability for light emission and potentially impacting other optoelectronic applications.

NATURE (2021)

Article Optics

Suppression of temperature quenching in perovskite nanocrystals for efficient and thermally stable light-emitting diodes

Mingming Liu et al.

Summary: Fluoride-treated CsPbBr3 nanocrystals exhibit near unity emission efficiency at temperatures up to 373 K, with constant decay kinetics. The treatment leads to surfaces rich in fluorine with wider energy gaps than the core, suppressing carrier trapping and improving thermal stability. Devices incorporating these nanocrystals show low turn-on voltage and high external quantum efficiency, with nearly 80% efficiency maintained at high temperatures, offering a promising pathway for high-performance light-emitting diodes based on perovskite nanostructures.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Lingmei Kong et al.

Summary: By incorporating MeS additives to modify quasi-2D RP perovskite films, the structure is reconstructed, energy transfer is enhanced, and defect density is reduced, leading to improved light emission efficiency and device performance.

NATURE COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Ligand-modulated electron transfer rates from CsPbBr3 nanocrystals to titanium dioxide

Xiaochun Liu et al.

Summary: The study demonstrates the modulation of electron transfer rates from CsPbBr3 PeNCs to mesoporous titanium dioxide films using different surface ligands, showing a potential perspective for designing appropriate ligands for diverse practical purposes.

NANOPHOTONICS (2021)

Article Chemistry, Physical

Critical role of additive-induced molecular interaction on the operational stability of perovskite light-emitting diodes

Chaoyang Kuang et al.

Summary: This study demonstrates greatly improved operational stability of high-efficiency PeLEDs by incorporating dicarboxylic acids into the precursor for perovskite depositions. The stable amides formed through an in situ amidation process prevent detrimental reactions between the perovskites and the charge injection layer, ensuring excellent operational stability. By optimizing the amidation reaction in the perovskite emissive layers, efficient PeLEDs with a peak external quantum efficiency of 18.6% and a long half-life time of 682 h at 20 mA cm(-2) have been achieved, representing a significant breakthrough in PeLEDs.
Article Nanoscience & Nanotechnology

Ligand-modulated electron transfer rates from CsPbBr3 nanocrystals to titanium dioxide

Xiaochun Liu et al.

Summary: This study successfully modulated the electron transfer rates from CsPbBr3 PeNCs to titanium dioxide films by using different surface ligands, and verified the ligand-bridge barrier effect through calculations. Transient absorption measurements confirmed the bridge-barrier effect, excluding carrier-delocalization effect of the naphthoic acid ligands. The research provides a perspective for designing composable and appropriate ligands for various practical purposes.

NANOPHOTONICS (2021)

Article Chemistry, Multidisciplinary

Low Roll-Off Perovskite Quantum Dot Light-Emitting Diodes Achieved by Augmenting Hole Mobility

Yu Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Potassium Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light-Emitting Diodes

Jun-Nan Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Suppressing Ion Migration Enables Stable Perovskite Light-Emitting Diodes with All-Inorganic Strategy

Lin Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Optics

Mini-LED, Micro-LED and OLED displays: present status and future perspectives

Yuge Huang et al.

LIGHT-SCIENCE & APPLICATIONS (2020)

Article Nanoscience & Nanotechnology

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Yitong Dong et al.

NATURE NANOTECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Thermal-induced interface degradation in perovskite light-emitting diodes

Yatao Zou et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Chemistry, Multidisciplinary

Electroluminescence of Perovskite Nanocrystals with Ligand Engineering

Jinwoo Park et al.

TRENDS IN CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

Modulation of ligand conjugation for efficient FAPbBr3 based green light-emitting diodes

Feng Zhang et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Article Multidisciplinary Sciences

Coherent single-photon emission from colloidal lead halide perovskite quantum dots

Hendrik Utzat et al.

SCIENCE (2019)

Article Chemistry, Physical

Simultaneous Cationic and Anionic Ligand Exchange For Colloidally Stable CsPbBr3 Nanocrystals

Muhammad Imran et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Multidisciplinary

CsPbBr3 Quantum Dots 2.0: Benzenesulfonic Acid Equivalent Ligand Awakens Complete Purification

Dandan Yang et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Light-Emitting Diodes Based on Colloidal Silicon Quantum Dots with Octyl and Phenylpropyl Ligands

Xiangkai Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Charge Transport between Coupling Colloidal Perovskite Quantum Dots Assisted by Functional Conjugated Ligands

Jinfei Dai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Review Chemistry, Physical

Genesis, challenges and opportunities for colloidal lead halide perovskite nanocrystals

Quinten A. Akkerman et al.

NATURE MATERIALS (2018)

Article Multidisciplinary Sciences

Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes

Wei Zou et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Targeted Ligand-Exchange Chemistry on Cesium Lead Halide Perovskite Quantum Dots for High-Efficiency Photovoltaics

Lance M. Wheeler et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Organic-Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48%

Jizhong Song et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Design Principles for Trap-Free CsPbX3 Nanocrystals: Enumerating and Eliminating Surface Halide Vacancies with Softer Lewis Bases

David P. Nenon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Shape-Pure, Nearly Monodispersed CsPbBr3 Nanocubes Prepared Using Secondary Aliphatic Amines

Muhammad Imran et al.

NANO LETTERS (2018)

Review Multidisciplinary Sciences

Properties and potential optoelectronic applications of lead halide perovskite nanocrystals

Maksym V. Kovalenko et al.

SCIENCE (2017)

Article Chemistry, Physical

Low-Cost TiS2 as Hole-Transport Material for Perovskite Solar Cells

Aron J. Huckaba et al.

SMALL METHODS (2017)

Article Chemistry, Multidisciplinary

Highly Efficient Perovskite-Quantum-Dot Light-Emitting Diodes by Surface Engineering

Jun Pan et al.

ADVANCED MATERIALS (2016)

Review Materials Science, Multidisciplinary

Colloidal lead halide perovskite nanocrystals: synthesis, optical properties and applications

He Huang et al.

NPG ASIA MATERIALS (2016)

Article Chemistry, Multidisciplinary

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Jizhong Song et al.

ADVANCED MATERIALS (2015)

Article Materials Science, Multidisciplinary

Perovskite solar cells: an emerging photovoltaic technology

Nam-Gyu Park

MATERIALS TODAY (2015)

Article Chemistry, Analytical

Colloidal CdSe quantum dot electroluminescence: ligands and light-emitting diodes

Andrea M. Munro et al.

MICROCHIMICA ACTA (2008)