相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructure and properties of graphite/copper composites fabricated with Cu-Ni double-layer coated graphite powders
Yue Yuan et al.
COMPOSITE INTERFACES (2020)
Phase Engineering of High-Entropy Alloys
Xuejiao Chang et al.
ADVANCED MATERIALS (2020)
Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy
Dong Geun Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Phase evolution in mechanical alloying and spark plasma sintering of AlxCoCrCuFeNi HEAs
Hosein Ziaei et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying
Jin-Kun Xiao et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Corrosion-Fatigue Failure of Gas-Turbine Blades in an Oil and Gas Production Plant
Mojtaba Rajabinezhad et al.
MATERIALS (2020)
Characterization of the passive properties of 254SMO stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS
Yunpeng Dou et al.
CORROSION SCIENCE (2020)
Nanostructured high-entropy materials
Michel J. R. Hache et al.
JOURNAL OF MATERIALS RESEARCH (2020)
The corrosion behaviour of CoCrFeNi-x (x = Cu, Al, Sn) high entropy alloy systems in chloride solution
Piyanut Muangtong et al.
CORROSION SCIENCE (2020)
Frictional Wear and Corrosion Behavior of AlCoCrFeNi High-Entropy Alloy Coatings Synthesized by Atmospheric Plasma Spraying
Yongkun Mu et al.
ENTROPY (2020)
Effect of zirconia content and sintering temperature on the density, microstructure, corrosion, and biocompatibility of the Ti-12Mo matrix for dental applications
Hossam M. Yehia et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing
Onur Guler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Preparation and characterization of Cu/(WC-TiC-Co)/graphene nano-composites as a suitable material for heat sink by powder metallurgy Cheek for method
Omayma El-Kady et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Microstructure and Corrosion Behavior of (CoCrFeNi)95Nb5 High-Entropy Alloy Coating Fabricated by Plasma Spraying
Wenrui Wang et al.
MATERIALS (2019)
The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating
Onur Guler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Additive manufacturing of high-strength CrMnFeCoNi-based High Entropy Alloys with TiC addition
Abdukadir Amar et al.
INTERMETALLICS (2019)
Evolution of Fe-containing intermetallic phases and abnormal grain growth in 6063 aluminum alloy during homogenization
Kanokwan Uttarasak et al.
RESULTS IN PHYSICS (2019)
Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution
Liang Wei et al.
CORROSION SCIENCE (2019)
Corrosion and wear properties of FeCrMnCoSi HVOF coatings
G. Y. Koga et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Phase evolution of CoCrCuFeNiSix high-entropy alloys prepared by mechanical alloying and spark plasma sintering
Anil Kumar et al.
MATERIALS RESEARCH EXPRESS (2019)
Corrosion behavior of CoxCrCuFeMnNi high-entropy alloys prepared by hot pressing sintered in 3.5% NaCl solution
Rui-Feng Zhao et al.
RESULTS IN PHYSICS (2019)
Microstructures and properties of CoCrCuFeNiMox high-entropy alloys fabricated by mechanical alloying and spark plasma sintering
Qiumin Yang et al.
POWDER METALLURGY (2018)
Hydrogen embrittlement of an interstitial equimolar high-entropy alloy
Hong Luo et al.
CORROSION SCIENCE (2018)
The role of nickel in mechanical performance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution
Fenfen Yang et al.
CORROSION SCIENCE (2018)
Microstructures and thermodynamic properties of high-entropy alloys CoCrCuFeNi
Bo Wu et al.
INTERMETALLICS (2018)
Influence of EDTA/THPED Dual-Ligand on Copper Electroless Deposition
Lu Jianhong et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)
Effect of diamond additions on the microstructure, physical and mechanical properties of WC- TiC- Co/Ni Nano-composite
H. M. Yehia et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
A review on fundamental of high entropy alloys with promising high-temperature properties
Jian Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructural stability and mechanical properties of equiatomic CoCrCuFeNi, CrCuFeMnNi, CoCrCuFeMn alloys
Seung Min Oh et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Progress in corrosion science at atomic and nanometric scales
Vincent Maurice et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Thermally induced structure evolution on the corrosion behavior of Al-Ni-Y amorphous alloys
L. M. Zhang et al.
CORROSION SCIENCE (2018)
Semiconductivities of passive films formed on stainless steel bend under erosion-corrosion conditions
L. Zeng et al.
CORROSION SCIENCE (2018)
Comparative study of the surface oxide films on lean duplex and corresponding single phase stainless steels by XPS and ToF-SIMS
Elise Gardin et al.
CORROSION SCIENCE (2018)
Beating hydrogen with its own weapon: Nano-twin gradients enhance embrittlement resistance of a high-entropy alloy
Hong Luo et al.
MATERIALS TODAY (2018)
Structure of the high-entropy alloy AlxCrFeCoNi: fcc versus bcc
Masako Ogura et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Wettability of molten Sn on AlCoCrCuxFeNi high-entropy alloy
G. F. Ma et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment
Tadashi Fujieda et al.
MATERIALS LETTERS (2017)
High-entropy alloy CoCrFeMnNi produced by powder metallurgy
Nadine Eissmann et al.
POWDER METALLURGY (2017)
Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
D. H. Xiao et al.
MATERIALS & DESIGN (2017)
Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite
Praveen Sathiyamoorthi et al.
MATERIALS & DESIGN (2017)
Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite
Aijun Zhang et al.
MATERIALS & DESIGN (2017)
High-entropy alloy coatings with excellent mechanical, corrosion resistance and magnetic properties prepared by mechanical alloying and hot pressing sintering
Caiyun Shang et al.
SURFACES AND INTERFACES (2017)
Characterization of intergranular corrosion defects in a 2024 T351 aluminium alloy
Marie-Laetitia de Bonfils-Lahovary et al.
CORROSION SCIENCE (2017)
Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy
B. Gwalani et al.
ACTA MATERIALIA (2017)
Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates
Zhongyu Cui et al.
CORROSION SCIENCE (2017)
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
X. L. Wu et al.
ACTA MATERIALIA (2016)
An Experimental Study of Thermophysical Properties for Quinary High-Entropy NiFeCoCrCu/Al Alloys
Wei-Li Wang et al.
CHINESE PHYSICS LETTERS (2016)
In-situ monitoring of pitting corrosion on vertically positioned 304 stainless steel by analyzing acoustic-emission energy parameter
Kaige Wu et al.
CORROSION SCIENCE (2016)
Effects of aging time on intergranular and pitting corrosion behavior of Cu-bearing 304L stainless steel in comparison with 304L stainless steel
Jie Jiang et al.
CORROSION SCIENCE (2016)
Effects of surface treatments on the corrosion and erosion-corrosion of 304 stainless steel in 3.5% NaCl solution
Z. B. Zheng et al.
CORROSION SCIENCE (2016)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Phase evolution in an Al0.5CrFeCoNiCu High Entropy Alloy
N. G. Jones et al.
INTERMETALLICS (2016)
Effect of Ni/Cr ratio on phase, microstructure and mechanical properties of NixCoCuFeCr2-x (x=1.0, 1.2, 1.5, 1.8 mol) high entropy alloys
Pei Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition
B. Gorr et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures
S. Praveen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
On the microstructure and erosion-corrosion resistance of AlCrFeCoNiCu high-entropy alloy via annealing treatment
J. H. Zhao et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review
Kenneth Kanayo Alaneme et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Microstructure and mechanical properties of multi-principal component AlCoCrFeNiCux alloy
Jin-Ming Zhu et al.
RARE METALS (2016)
Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al-Cr alloys produced via high-energy ball milling
R. K. Gupta et al.
CORROSION SCIENCE (2015)
Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces
Vincent Maurice et al.
FARADAY DISCUSSIONS (2015)
Empirical design of single phase high-entropy alloys with high hardness
Fuyang Tian et al.
INTERMETALLICS (2015)
Oxidation of CoCrFeMnNi High Entropy Alloys
Gordon R. Holcomb et al.
JOM (2015)
Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
B. Gorr et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
A novel method for the production of metal powders without conventional atomization process
A. Canakci et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy
Louis J. Santodonato et al.
NATURE COMMUNICATIONS (2015)
Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces
Vincent Maurice et al.
FARADAY DISCUSSIONS (2015)
Solid-Solution CrCoCuFeNi High-Entropy Alloy Thin Films Synthesized by Sputter Deposition
Zhinan An et al.
MATERIALS RESEARCH LETTERS (2015)
Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys
Zhi Tang et al.
ENTROPY (2014)
Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries
F. Otto et al.
INTERMETALLICS (2014)
Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer
S. G. Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
P. P. Bhattacharjee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system
G. A. Salishchev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering
Sicong Fang et al.
MATERIALS & DESIGN (2014)
Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying
A. Canakci et al.
MICRO & NANO LETTERS (2014)
Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy
A. Canakci et al.
POWDER METALLURGY AND METAL CERAMICS (2014)
Laser cladding of high-entropy alloy on H13 steel
Xiao-Tao Liu et al.
RARE METALS (2014)
The structure and properties of high-entropy alloys and nitride coatings based on them
A. D. Pogrebnjak et al.
RUSSIAN CHEMICAL REVIEWS (2014)
Guidelines in predicting phase formation of high-entropy alloys
Y. Zhang et al.
MRS COMMUNICATIONS (2014)
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
F. Otto et al.
ACTA MATERIALIA (2013)
Tensile properties of high- and medium-entropy alloys
A. Gali et al.
INTERMETALLICS (2013)
Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy
Xing-Wu Qiu
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Thermomagnetic analysis of FeCoCrxNi alloys: Magnetic entropy of high-entropy alloys
M. S. Lucas et al.
JOURNAL OF APPLIED PHYSICS (2013)
Thermal expansion and thermal conductivity characteristics of Cu-Al2O3 nanocomposites
A. Fathy et al.
MATERIALS & DESIGN (2013)
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Wei Guo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Absence of long-range chemical ordering in equimolar FeCoCrNi
M. S. Lucas et al.
APPLIED PHYSICS LETTERS (2012)
Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys
Woei-Ren Wang et al.
INTERMETALLICS (2012)
Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys
Tao-Tsung Shun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Fabrication of full density near-nanostructured cemented carbides by combination of VC/Cr3C2 addition and consolidation by SPS and HIP technologies
V. Bonache et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2011)
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Sheng Guo et al.
JOURNAL OF APPLIED PHYSICS (2011)
Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys
Chin-You Hsu et al.
WEAR (2010)
Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys
C. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system
Yu-Liang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Solid-solution phase formation rules for multi-component alloys
Yong Zhang et al.
ADVANCED ENGINEERING MATERIALS (2008)
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Y. J. Zhou et al.
APPLIED PHYSICS LETTERS (2007)
Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content
Jien-Min Wu et al.
WEAR (2006)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)
Electrochemical kinetics of the high entropy alloys in aqueous environments - a comparison with type 304 stainless steel
YY Chen et al.
CORROSION SCIENCE (2005)
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
YJ Hsu et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements
CJ Tong et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
The relationship between hardness and yield stress in irradiated austenitic and ferritic steels
JT Busby et al.
JOURNAL OF NUCLEAR MATERIALS (2005)
Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating
PK Huang et al.
ADVANCED ENGINEERING MATERIALS (2004)
Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements
JW Yeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Relationship between the widths of supercooled liquid regions and bond parameters of Mg-based bulk metallic glasses
SS Fang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)
Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys
A Takeuchi et al.
MATERIALS TRANSACTIONS JIM (2000)