相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microstructural and Thermal Characterization of 316L+WC Composite Coatings Obtained by Laser Cladding
Tommaso Maurizi Enrici et al.
ADVANCED ENGINEERING MATERIALS (2020)
Mesoscopic study of thermal behavior, fluid dynamics and surface morphology during selective laser melting of Ti-based composites
Donghua Dai et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Experimental characterization and micromechanical-statistical modeling of 316L stainless steel processed by selective laser melting
Xue Wang et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Process planning of L-PBF of AISI 316L for improving surface quality and relating part integrity with microstructural characteristics
Erick Ramirez-Cedillo et al.
SURFACE & COATINGS TECHNOLOGY (2020)
High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel
Sajid Alvi et al.
WEAR (2020)
Fracture analysis in directed energy deposition (DED) manufactured 316L stainless steel using a phase-field approach
Erfan Azinpour et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2020)
Influence of Surface Mechanical Attrition Treatment (SMAT) post-treatment on microstructural, mechanical and tensile behaviour of additive manufactured AISI 316L
Q. Portella et al.
MATERIALS CHARACTERIZATION (2020)
Microstructure and hardness response of novel 316L stainless steel composite with TiN addition fabricated by SLM
Dhritti Tanprayoon et al.
OPTICS AND LASER TECHNOLOGY (2020)
Laser cladding of TiC reinforced 316L stainless steel composites: Feedstock powder preparation and microstructural evaluation
Onur Ertugrul et al.
POWDER TECHNOLOGY (2020)
Microstructure and properties of CLAM/316L steel friction stir welded joints
Wenshen Tang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit
R. T. Jardin et al.
MATERIALS LETTERS (2019)
Finite element simulation of thermal behavior in single-track multiple-layers thin wall without-support during selective laser melting
Weibo Huang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
A novel method for the molten pool and porosity formation modelling in selective laser melting
Min Zheng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Modeling of the effect of powder parameters on laser cladding using coaxial nozzle
B. A. Khamidullin et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing
P. W. Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel
Yang Liu et al.
OPTICS AND LASER TECHNOLOGY (2018)
The Hardness of Additively Manufactured Alloys
J. S. Zuback et al.
MATERIALS (2018)
Numerical modeling of the heating phase of the selective laser sintering process
Liu Xin et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations
H. -S. Tran et al.
MATERIALS & DESIGN (2017)
Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel
G. T. Gray et al.
ACTA MATERIALIA (2017)
Building blocks for a digital twin of additive manufacturing
G. L. Knapp et al.
ACTA MATERIALIA (2017)
Optimization of laser welding process parameters of stainless steel 316L using FEM, Kriging and NSGA-II
Ping Jiang et al.
ADVANCES IN ENGINEERING SOFTWARE (2016)
2D modelling of clad geometry and resulting thermal cycles during laser cladding
Wei Ya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser
Zhe Zhang et al.
MATERIALS & DESIGN (2016)
Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
Ali Foroozmehr et al.
MATERIALS & DESIGN (2016)
Multiphysics simulation of laser cladding process to study the effect of process parameters on clad geometry
Ravi Parekh et al.
3RD INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING 2016, ICIAME 2016 (2016)
Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6Al-4V
V. Tuninetti et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS
K. Zeng et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Analytical and numerical modeling of light scattering in composite transmission laser welding process
Andre Chateau Akue Asseko et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Implementation of a thermomechanical model for the simulation of selective laser melting
N. E. Hodge et al.
COMPUTATIONAL MECHANICS (2014)
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
V. Manvatkar et al.
JOURNAL OF APPLIED PHYSICS (2014)
Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
A. Mertens et al.
POWDER METALLURGY (2014)
Emissivity calibration for temperatures measurement using thermography in the context of machining
Frederic Valiorgue et al.
APPLIED THERMAL ENGINEERING (2013)
Numerical Simulation of a Conical Shape Made By Single Point Incremental
J. I. V. de Sena et al.
NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS (2013)
Effects of WC particle size on the wear resistance of laser surface alloyed medium carbon steel
Xin Tong et al.
APPLIED SURFACE SCIENCE (2012)
A finer modeling approach for numerically predicting single track geometry in two dimensions during Laser Rapid Manufacturing
Atul Kumar et al.
OPTICS AND LASER TECHNOLOGY (2012)
Temporal development of melt-pool morphology and clad geometry in laser powder deposition
Vahid Fallah et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding
Soundarapandian Santhanakrishnan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Laser processing of bulk Al-12Si alloy: influence of microstructure on thermal properties
Felix A. Espana et al.
PHILOSOPHICAL MAGAZINE (2011)
Finite element modeling of multi-pass welding and shaped metal deposition processes
Michele Chiumenti et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Thermal stress analysis of Wc-Co/Cr-Ni multilayer coatings on 316L steel substrate during cooling process
Onur Sayman et al.
MATERIALS & DESIGN (2009)
Comparison of two-dimensional and three-dimensional thermal models of the LENS® process
H. Yin et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
Residual stresses in LENS-deposited AISI 410 stainless steel plates
Liang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures
Aditad Vasinonta et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
An analytical model of the laser clad geometry
C. Lalas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Rapid tooling by laser powder deposition: Process simulation using finite element analysis
L Costa et al.
ACTA MATERIALIA (2005)
Temperature distribution in laser-clad multi-layers
R Jendrzejewski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
The development of temperature fields and powder flow during laser direct metal deposition wall growth
AJ Pinkerton et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2004)
分享论文
