相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The effect of rod orientation on the strength of highly porous filament printed 3D SiC ceramic architectures
Alberto Gomez-Gomez et al.
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2021)
Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores
He Li et al.
CERAMICS INTERNATIONAL (2021)
Stereolithography additive manufacturing of multi-ceramic triangle structures with tunable thermal expansion
Keqiang Zhang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
3D printing of glass by additive manufacturing techniques: a review
Dao Zhang et al.
FRONTIERS OF OPTOELECTRONICS (2021)
X-ray tomography of additive-manufactured zirconia: Processing defects - Strength relations
M. Saadaoui et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing
Xiaoyan Liu et al.
CERAMICS INTERNATIONAL (2020)
Performance optimization of complicated structural SiC/Si composite ceramics prepared by selective laser sintering
Suocheng Song et al.
CERAMICS INTERNATIONAL (2020)
A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties
S. M. Fijul Kabir et al.
COMPOSITE STRUCTURES (2020)
Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs - a review
Jon Binner et al.
INTERNATIONAL MATERIALS REVIEWS (2020)
Dispersion and stability of SiC ceramic slurry for stereolithography
Guojiao Ding et al.
CERAMICS INTERNATIONAL (2020)
3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions
Huiwen Xiong et al.
CERAMICS INTERNATIONAL (2020)
High strength aligned SiC nanowire reinforced SiC porous ceramics fabricated by 3D printing and chemical vapor infiltration
Quan Zhu et al.
CERAMICS INTERNATIONAL (2020)
Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing
Ehsan Rezaei et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)
Preparation and stereolithography of SiC ceramic precursor with high photosensitivity and ceramic yield
Jiangshan Chen et al.
CERAMICS INTERNATIONAL (2020)
High-temperature flexural strength of SiC ceramics prepared by additive manufacturing
Teng-Teng Xu et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)
Conformable green bodies: Plastic forming of robocasted advanced ceramics
Iuliia S. Elizarova et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition
A. Baux et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Digital light processing of 3Y-TZP strengthened ZrO2 ceramics
Keqiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Stereolithography-Based Additive Manufacturing of High Performance Osteoinductive Calcium Phosphate Ceramics by a Digital Light-Processing System
Yihang Wei et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering
Junwen Liu et al.
JOURNAL OF ADVANCED CERAMICS (2020)
Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores
He Li et al.
JOURNAL OF ADVANCED CERAMICS (2020)
Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror
Guojiao Ding et al.
CERAMICS INTERNATIONAL (2020)
Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility
Chengwei Feng et al.
JOURNAL OF ADVANCED CERAMICS (2020)
Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior
Xiaowu Chen et al.
JOURNAL OF ADVANCED CERAMICS (2020)
Mechanical properties of zirconia octet truss structures fabricated by DLP 3D printing
Weiming Zhao et al.
MATERIALS RESEARCH EXPRESS (2020)
Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
3D printing of porous SiC ceramics added with SiO2 hollow microspheres
Xiaomei Sun et al.
CERAMICS INTERNATIONAL (2020)
Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design
Marco Pelanconi et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2020)
High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing
Keqiang Zhang et al.
CERAMICS INTERNATIONAL (2019)
Selective laser melting for the preparation of an ultra-high temperature ceramic coating
Derek King et al.
CERAMICS INTERNATIONAL (2019)
Maskless lithography of silazanes for fabrication of ceramic micro-components
S. Clark Ligon et al.
CERAMICS INTERNATIONAL (2019)
3D printed SiC nanowire reinforced composites for broadband electromagnetic absorption
Shanshan Xiao et al.
CERAMICS INTERNATIONAL (2019)
Photosensitive ZrO2 suspensions for stereolithography
Keqiang Zhang et al.
CERAMICS INTERNATIONAL (2019)
Strengthening three-dimensional printed ultra-light ceramic lattices
Hui Mei et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior
Guiwu Liu et al.
JOURNAL OF ADVANCED CERAMICS (2019)
Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing
Zhongliang Lu et al.
CERAMICS INTERNATIONAL (2019)
High temperature strength of an ultra high temperature ceramic produced by additive manufacturing
Ezra Feilden et al.
CERAMICS INTERNATIONAL (2019)
Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review
Yutaro Arai et al.
CERAMICS INTERNATIONAL (2019)
Ballistic reliability study on SiC/UHMWPE composite armor against armor-piercing bullet
Zhiwei Shen et al.
COMPOSITE STRUCTURES (2019)
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Vamsi Krishna Balla et al.
COMPOSITES PART B-ENGINEERING (2019)
Easy-To-Remove Composite Support Material and Procedure in Additive Manufacturing of Metallic Components Using Multiple Material Laser-Based Powder Bed Fusion
Chao Wei et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Additive manufacturing of SiSiC by layerwise slurry deposition and binder jetting (LSD-print)
Andrea Zocca et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing
Yuanlin Xia et al.
SCRIPTA MATERIALIA (2019)
The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process
Heng Zhang et al.
CERAMICS INTERNATIONAL (2019)
Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering
Hua Fu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A review of third generation SiC fibers and SiCf/SiC composites
Pengren Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Stereolithography-based additive manufacturing of gray-colored SiC ceramic green body
Guojiao Ding et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the bottom-up and the top-down approaches
Oscar Santoliquido et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review
Mandi Khodaei et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Robocasting of reaction bonded silicon carbide structures
Larissa Wahl et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Research progress of ceramic matrix composite parts based on additive manufacturing technology
Zhongliang Lu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Fabrication of SiC ceramic architectures using stereolithography combined with precursor infiltration and pyrolysis
Rujie He et al.
CERAMICS INTERNATIONAL (2019)
3D-printed oblique honeycomb Al2O3/SiCw structure for electromagnetic wave absorption
Hui Mei et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Ultrahigh strength printed ceramic lattices
Hui Mei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology
Xinyuan Lv et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration
A. Fleisher et al.
CERAMICS INTERNATIONAL (2019)
3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties
Huiwen Xiong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly
Qinghua Chen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Robocasting of SiO2-Based Bioactive Glass Scaffolds with Porosity Gradient for Bone Regeneration and Potential Load-Bearing Applications
Jacopo Barberi et al.
MATERIALS (2019)
The trends and challenges of fiber reinforced additive manufacturing
Ismail Fidan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
High-speed grinding of HIP-SiC ceramics on transformation of microscopic features
Chongjun Wu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Highly-porous hierarchical SiC structures obtained by filament printing and partial sintering
A. Gomez-Gomez et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
A framework for big data driven process analysis and optimization for additive manufacturing
Arfan Majeed et al.
RAPID PROTOTYPING JOURNAL (2019)
Laser powder bed fusion of a Magnesium-SiC metal matrix composite
Wessel W. Wits et al.
52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS) (2019)
Recycled HDPE reinforced Al2O3 and SiC three dimensional printed patterns for sandwich composite material
Narinder Singh et al.
ENGINEERING RESEARCH EXPRESS (2019)
3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process
Ki-Won Gyak et al.
REACTION CHEMISTRY & ENGINEERING (2019)
Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures
Yang Yang et al.
ADVANCED MATERIALS (2018)
SiC reticulated porous ceramics by 3D printing, gelcasting and liquid drying
Tianzhe Tu et al.
CERAMICS INTERNATIONAL (2018)
Fabrication of complicated silicon carbide ceramic components using combined 3D printing with gelcasting
Fangjie Chen et al.
CERAMICS INTERNATIONAL (2018)
Polymer-derived SiCN cellular structures from replica of 3D printed lattices
Prasanta Jana et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
Sol-gel infiltration of complex cellular indirect 3D printed alumina
Martin Stumpf et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Direct laser sintering of reaction bonded silicon carbide with low residual silicon content
Sebastian Meyers et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Design of a Shaping System for Stereolithography with High Solid Loading Ceramic Suspensions
Kehui Hu et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
Laser additive manufacturing and homogeneous densification of complicated shape SiC ceramic parts
Kai Liu et al.
CERAMICS INTERNATIONAL (2018)
3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers
Hehao Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Origami and 4D printing of elastomer-derived ceramic structures
Guo Liu et al.
SCIENCE ADVANCES (2018)
SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems
Y. de Hazan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Building digital twins of 3D printing machines
T. DebRoy et al.
SCRIPTA MATERIALIA (2017)
Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography
Hongyu Xing et al.
CERAMICS INTERNATIONAL (2017)
Reticulated Replica Ceramic Foams: Processing, Functionalization, and Characterization
Tobias Fey et al.
ADVANCED ENGINEERING MATERIALS (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering
Ning Song et al.
CERAMICS INTERNATIONAL (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Direct Ink Writing of Silicon Carbide for Microwave Optics
Chris M. Larson et al.
ADVANCED ENGINEERING MATERIALS (2016)
3D PRINTING Additive manufacturing of polymer-derived ceramics
Zak C. Eckel et al.
SCIENCE (2016)
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
John W. Halloran
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants
Sophie C. Cox et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A survey of the design methods for additive manufacturing to improve functional performance
Yunlong Tang et al.
RAPID PROTOTYPING JOURNAL (2016)
Additive manufacturing-enabled design theory and methodology: a critical review
Sheng Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Instrumented and Vickers Indentation for the Characterization of Stiffness, Hardness and Toughness of Zirconia Toughened Al2O3 and SiC Armor
Aleksandra Nastic et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Properties of silicon carbide ceramics from gelcasting and pressureless sintering
Jingxian Zhang et al.
MATERIALS & DESIGN (2015)
Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3D-prining
Wenyan Duan et al.
MATERIALS LETTERS (2015)
SiSiC Heat Exchangers for Recuperative Gas Burners with Highly Structured Surface Elements
Alberto Ortona et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer
Andrea Zocca et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Processing and properties of macroporous silicon carbide ceramics: A review
Jung-Hye Eom et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)
Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting
Kunpeng Cai et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Cellular ceramics produced by rapid prototyping and replication
Alberto Ortona et al.
MATERIALS LETTERS (2012)
Preceramic Paper-Derived Ceramics
Nahum Travitzky et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder
H. Exner et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2008)
Laminated object manufacturing of preceramic-paper-derived Si-SiC composites
Hans Windsheimer et al.
ADVANCED MATERIALS (2007)
Fabrication of Al2O3-based composites by indirect 3D-printing
R Melcher et al.
MATERIALS LETTERS (2006)
Rapid manufacturing of silicon carbide composites
RS Evans et al.
RAPID PROTOTYPING JOURNAL (2005)
Fabrication of polymer derived ceramic parts by selective laser curing
T Friedel et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Preparation of SiC/SiC composites by hot pressing, using Tyranno-SA fiber as reinforcement
SM Dong et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)