相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling
Mohammed Algarni
POLYMERS (2021)
Additive Manufacturing of Polyether Ether Ketone (PEEK) for Space Applications: A Nanosat Polymeric Structure
Marianna Rinaldi et al.
POLYMERS (2021)
Fracture behavior of additively printed ABS: Effects of print architecture and loading rate
John P. Isaac et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters
Yiqiao Wang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling
Ming-Hsien Hsueh et al.
POLYMERS (2021)
Interlayer bonding strength of 3D printed PEEK specimens
Chya-Yan Liaw et al.
SOFT MATTER (2021)
Effect of infill parameters on material sustainability and mechanical properties in fused deposition modelling process: a case study
Saty Dev et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Impact strength of 3D printed PLA using open source FFF-based 3D printer
Shilpesh R. Rajpurohit et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review
Narongkorn Krajangsawasdi et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?
Cemile Basgul et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Fused deposition modelling: a review
Swapnil Vyavahare et al.
RAPID PROTOTYPING JOURNAL (2020)
Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS
Junior Nomani et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle
Mateusz Galeja et al.
MATERIALS (2020)
Influence of ABS print parameters on a 3D open-source, self-replicable printer
Andre Luiz Alves Guimaraes et al.
RAPID PROTOTYPING JOURNAL (2020)
Experimental and Numerical Analysis for the Mechanical Characterization of PETG Polymers Manufactured with FDM Technology under Pure Uniaxial Compression Stress States for Architectural Applications
Jorge Manuel Mercado-Colmenero et al.
POLYMERS (2020)
Tensile and Bending Strength Improvements in PEEK Parts Using Fused Deposition Modelling 3D Printing Considering Multi-Factor Coupling
Yao Li et al.
POLYMERS (2020)
Impact of fused deposition process parameter (infill pattern) on the strength of PETG part
R. Srinivasan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Prediction of tensile strength in FDM printed ABS parts using response surface methodology (RSM)
R. Srinivasan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Effect on infill density on mechanical properties of PETG part fabricated by fused deposition modelling
R. Srinivasan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Influence of fused deposition modeling process parameters on the mechanical properties of PETG parts
R. Srinivasan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics
M. Ajay Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Optimization of FDM 3D printing process parameters for multi-material using artificial neural network
Dinesh Yadav et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Improvements in Accuracy of Fused Deposition Modeling Via Integration of Low-Cost On-Board Vision Systems
Vito Basile et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2020)
Material Property-Manufacturing Process Optimization for Form 2 Vat-Photo Polymerization 3D Printers
Elisa Aznarte Garcia et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
Mechanical property of FDM printed ABS: influence of printing parameters
M. Samykano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling
Xinzhou Zhang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Impact of processing parameters on tensile strength, in-process crystallinity and mesostructure in FDM-fabricated PLA specimens
Ognjan Luzanin et al.
RAPID PROTOTYPING JOURNAL (2019)
Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK
Peng Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses
Yu Zhao et al.
MATERIALS & DESIGN (2019)
Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup
Josef Kiendl et al.
COMPOSITES PART B-ENGINEERING (2019)
Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
Shilpesh R. Rajpurohit et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Full-Density Fused Deposition Modeling Dimensional Error as a Function of Raster Angle and Build Orientation: Large Dataset for Eleven Materials
Sherri L. Messimer et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Robust design application for optimizing ABS fused filament fabrication process: A case study
A. Tsiolikas et al.
INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI (2019)
Influence of layer thickness and 3D printing direction on tensile properties of ABS material
S. T. Dwiyati et al.
4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019 (2019)
Infill pattern and density effects on the tensile properties of 3D printed PLA material
M. Rismalia et al.
4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019 (2019)
Micro-FDM Process Capability and post-processing effects on mechanical properties
Claudia Pagano et al.
PROCEEDINGS OF 33RD INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-33) (2019)
A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics
Arup Dey et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Tensile and Fatigue Analysis of 3D-Printed Polyethylene Terephthalate Glycol
Grzegorz Dolzyk et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2019)
Experimental investigation on mechanical properties of PETG material processed by fused deposition modeling method
K. Durgashyam et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Additive layer manufacturing of poly (ether ether ketone) via FDM
Marianna Rinaldi et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
A material length scale-based methodology to assess static strength of notched additively manufactured polylactide (PLA)
A. A. Ahmed et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Diana Popescu et al.
POLYMER TESTING (2018)
The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties
Hongbin Li et al.
RAPID PROTOTYPING JOURNAL (2018)
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Xiaohu Deng et al.
MATERIALS (2018)
Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
Aboma Wagari Gebisa et al.
MATERIALS (2018)
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
M. F. Arif et al.
MATERIALS & DESIGN (2018)
The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
Adrian Rodriguez-Panes et al.
MATERIALS (2018)
Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication
Miquel Domingo-Espin et al.
MATERIALS (2018)
3D metal printing technology: the need to re-invent design practice
Thomas Duda et al.
AI & SOCIETY (2018)
Process-structure-property effects on ABS bond strength in fused filament fabrication
A. C. Abbott et al.
ADDITIVE MANUFACTURING (2018)
Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method
Xinhua Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Jason T. Cantrell et al.
RAPID PROTOTYPING JOURNAL (2017)
The Quantitative Research of Interaction between Key Parameters and the Effects on Mechanical Property in FDM
Hongbin Li et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Experimental characterization of the tensile strength of ABS parts manufactured by fused deposition modeling process
Kyle Raney et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach
Ala'aldin Alafaghani et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments
Jonathan Torres et al.
RAPID PROTOTYPING JOURNAL (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Miguel Fernandez-Vicente et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm
R. Venkata Rao et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2016)
Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation
Behzad Rankouhi et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Jonathan Torres et al.
JOM (2015)
Tensile and fatigue behavior of layered acrylonitrile butadiene styrene
Sophia Ziemian et al.
RAPID PROTOTYPING JOURNAL (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
Farzad Rayegani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Evaluation of stiffness and strength in fused deposition sandwich specimens
L. C. Magalhes et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2014)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
Experimental investigation of FDM process for improvement of mechanical properties and production cost
Ismail Durgun et al.
RAPID PROTOTYPING JOURNAL (2014)
Multi-objective optimisation of strength and volumetric shrinkage of FDM parts A multi-objective optimization scheme is used to optimize the strength and volumetric shrinkage of FDM parts considering different process parameters
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30
Dario Croccolo et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Experimental investigation and empirical modelling of FDM process for compressive strength improvement
Anoop K. Sood et al.
JOURNAL OF ADVANCED RESEARCH (2012)
Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process
Dar-Yuan Chang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
Analysis on fused deposition modelling performance
Nur Saaidah Abu Bakar et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2010)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Measurement of anisotropic compressive strength of rapid prototyping parts
C. S. Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures
Ker Chin Ang et al.
RAPID PROTOTYPING JOURNAL (2006)
Optimization of rapid prototyping parameters for production of flexible ABS object
BH Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)