相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Hole Transfer Layer Engineering for CdTe Nanocrystal Photovoltaics with Improved Efficiency
Yasi Jiang et al.
NANOMATERIALS (2020)
Recent Progress in Hybrid Solar Cells Based on Solution-Processed Organic and Semiconductor Nanocrystal: Perspectives on Device Design
Sihang Xie et al.
APPLIED SCIENCES-BASEL (2020)
Surface passivation via acid vapor etching enables efficient and stable solution-processed CdTe nanocrystal solar cells
Xiuzhen Guo et al.
SUSTAINABLE ENERGY & FUELS (2020)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Controlled Steric Hindrance Enables Efficient Ligand Exchange for Stable, Infrared-Bandgap Quantum Dot Inks
Mengxia Liu et al.
ACS ENERGY LETTERS (2019)
Interface Engineering for Both Cathode and Anode Enables Low-Cost Highly Efficient Solution-Processed CdTe Nanocrystal Solar Cells
Zhitao Rong et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Large-Area Organic Solar Cells: Material Requirements, Modular Designs, and Printing Methods
Guodong Wang et al.
ADVANCED MATERIALS (2019)
High-Performance and Uniform 1 cm(2) Polymer Solar Cells with D-1-A-D-2-A-Type Random Terpolymers
Injeong Shin et al.
ADVANCED ENERGY MATERIALS (2018)
Overcoming the Ambient Manufacturability-Scalability-Performance Bottleneck in Colloidal Quantum Dot Photovoltaics
Ahmad R. Kirmani et al.
ADVANCED MATERIALS (2018)
Up-scalable sheet-to-sheet production of high efficiency perovskite module and solar cells on 6-in. substrate using slot die coating
Francesco Di Giacomo et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
High-efficiency solution-processed CdTe nanocrystal solar cells incorporating a novel crosslinkable conjugated polymer as the hole transport layer
Xiuzhen Guo et al.
NANO ENERGY (2018)
Hybrid Tandem Quantum Dot/Organic Solar Cells with Enhanced Photocurrent and Efficiency via Ink and Interlayer Engineering
Taesoo Kim et al.
ACS ENERGY LETTERS (2018)
Challenges for commercializing perovskite solar cells
Yaoguang Rong et al.
SCIENCE (2018)
Butylamine-Catalyzed Synthesis of Nanocrystal Inks Enables Efficient Infrared CQD Solar Cells
Junghwan Kim et al.
ADVANCED MATERIALS (2018)
Infrared Cavity-Enhanced Colloidal Quantum Dot Photovoltaics Employing Asymmetric Multilayer Electrodes
Se-Woong Baek et al.
ACS ENERGY LETTERS (2018)
Environmentally Friendly Solvent-Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade-Coating Method
Wenchao Zhao et al.
ADVANCED MATERIALS (2018)
Efficient, large area organic photovoltaic modules with active layers processed with non-halogenated solvents in air
Siew-Lay Lim et al.
ORGANIC ELECTRONICS (2017)
A life cycle assessment of perovskite/silicon tandem solar cells
Marina Monteiro Lunardi et al.
PROGRESS IN PHOTOVOLTAICS (2017)
Molecular Doping of the Hole-Transporting Layer for Efficient, Single-Step-Deposited Colloidal Quantum Dot Photovoltaics
Ahmad R. Kirmani et al.
ACS ENERGY LETTERS (2017)
High-Efficiency Aqueous-Processed Polymer/CdTe Nanocrystals Planar Heterojunction Solar Cells with Optimized Band Alignment and Reduced Interfacial Charge Recombination
Qingsen Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Improvement in Open-Circuit Voltage of Thin Film Solar Cells from Aqueous Nanocrystals by Interface Engineering
Xiaohang Du et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Doped Semiconductor-Nanocrystal Emitters with Optimal Photoluminescence Decay Dynamics in Microsecond to Millisecond Range: Synthesis and Applications
Chaodan Pu et al.
ACS CENTRAL SCIENCE (2016)
Recycling Perovskite Solar Cells To Avoid Lead Waste
Andreas Binek et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
High efficiency aqueous-processed MEH-PPV/CdTe hybrid solar cells with a PCE of 4.20%
Fangyuan Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Improving performance in CdTe/CdSe nanocrystals solar cells by using bulk nano-heterojunctions
Ya Xie et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Aqueous-Processed Inorganic Thin-Film Solar Cells Based on CdSexTe1-x Nanocrystals: The Impact of Composition on Photovoltaic Performance
Qingsen Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Investigation of Structural, Chemical, and Electrical Properties of CdTe/Back Contact Interface by TEM and XPS
Jun-Feng Han et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Solution processed CdTe/CdSe nanocrystal solar cells with more than 5.5% efficiency by using an inverted device structure
Han Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Efficient Spray-Coated Colloidal Quantum Dot Solar Cells
Illan J. Kramer et al.
ADVANCED MATERIALS (2015)
Nanocrystal Grain Growth and Device Architectures for High-Efficiency CdTe Ink-Based Photovoltaics
Ryan W. Crisp et al.
ACS NANO (2014)
Physically Flexible, Rapid-Response Gas Sensor Based on Colloidal Quantum Dot Solids
Huan Liu et al.
ADVANCED MATERIALS (2014)
Highly Specific Electrochemical Analysis of Cancer Cells using Multi-Nanoparticle Labeling
Ying Wan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Sintered CdTe Nanocrystal Thin Films: Determination of Optical Constants and Application in Novel Inverted Heterojunction Solar Cells
Woojun Yoon et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2014)
Enhanced photovoltaic performance of nanocrystalline CdTe/ZnO solar cells using sol-gel ZnO and positive bias treatment
B. I. MacDonald et al.
JOURNAL OF APPLIED PHYSICS (2014)
High Efficiency Solution Processed Sintered CdTe Nanocrystal Solar Cells: The Role of Interfaces
Matthew G. Panthani et al.
NANO LETTERS (2014)
Solution-processed, high-performance light-emitting diodes based on quantum dots
Xingliang Dai et al.
NATURE (2014)
Improved performance and stability in quantum dot solar cells through band alignment engineering
Chia-Hao M. Chuang et al.
NATURE MATERIALS (2014)
Sun-Believable Solar Paint. A Transformative One-Step Approach for Designing Nanocrystalline Solar Cells
Matthew P. Genovese et al.
ACS NANO (2012)
Layer-by-Layer Assembly of Sintered CdSexTe1-x Nanocrystal Solar Cells
Brandon I. MacDonald et al.
ACS NANO (2012)
Enhanced Performance and Air Stability of 3.2% Hybrid Solar Cells: How the Functional Polymer and CdTe Nanostructure Boost the Solar Cell Efficiency
Hsieh-Chih Chen et al.
ADVANCED MATERIALS (2011)
Colloidal quantum dot photodetectors
Gerasimos Konstantatos et al.
INFRARED PHYSICS & TECHNOLOGY (2011)
Airbrush spray-coating of polymer bulk-heterojunction solar cells
Gianpaolo Susanna et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Nanostructured materials for photon detection
Gerasimos Konstantatos et al.
NATURE NANOTECHNOLOGY (2010)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
High photovoltaic performance of inkjet printed polymer: Fullerene blends
Claudia N. Hoth et al.
ADVANCED MATERIALS (2007)
Performance analysis of printed bulk heterojunction solar cells
Pavel Schilinsky et al.
ADVANCED FUNCTIONAL MATERIALS (2006)