相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effects of Er and Zr Additions on the As-Cast Microstructure and on the Solution-Heat-Treatment Response of Innovative Al-Si-Mg-Based Alloys
M. Colombo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Improved Elevated Temperature Properties in Al-13%Si Piston Alloys by Mo Addition
L. Jin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Microstructural changes induced by Er and Zr additions to A356 alloy investigated by thermal analyses and STEM observations
M. Colombo et al.
MATERIALS CHARACTERIZATION (2020)
Coarsening- and creep resistance of precipitation-strengthened Al-Mg-Zr alloys processed by selective laser melting
S. Griffiths et al.
ACTA MATERIALIA (2020)
High-temperature mechanical properties of cast Al-Si-Cu-Mg alloy by combined additions of cerium and zirconium
William Lemos Bevilaqua et al.
MATERIALS RESEARCH EXPRESS (2020)
Tensile and creep properties of Al-7Si-0.3Mg alloy with Zr and Er addition
S. Rashno et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Impression creep characterization of cast Al-7Si-0.3Mg alloy
S. Rashno et al.
MATERIALS RESEARCH EXPRESS (2019)
Precipitation behavior of dispersoids and elevated-temperature properties in Al-Si-Mg foundry alloy with Mo addition
S. Chen et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Tensile Properties of a Cast Al-Si-Mg Alloy with Reduced Si Content and Cr Addition at High Temperature
Marialaura Tocci et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
A new model for the description of creep behaviour of aluminium-based composites reinforced with nanosized particles
Stefano Spigarelli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Influences of different Zr additions on the microstructure, room and high temperature mechanical properties of an Al-7Si-0.4Mg alloy modified with 0.25%Er
Marco Colombo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High-Temperature Behavior of High-Pressure Diecast Alloys Based on the Al-Si-Cu System: The Role Played by Chemical Composition
Elisabetta Gariboldi et al.
METALS (2018)
Mo Addition to the A354 (Al-Si-Cu-Mg) Casting Alloy: Effects on Microstructure and Mechanical Properties at Room and High Temperature
Alessandro Morri et al.
METALS (2018)
Mechanical Performance of Zr-Containing 354-Type Al-Si-Cu-Mg Cast Alloy: Role of Additions and Heat Treatment
M. H. Abdelaziz et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Effects of Holmium Additions on Microstructure and Properties of A356 Aluminum Alloys
Qiang Wang et al.
METALS (2018)
Er addition to Al-Si-Mg-based casting alloy: Effects on microstructure, room and high temperature mechanical properties
Marco Colombo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys
Mohammadreza Zamani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Damage Assessment of A356 Al Alloy Under Ratcheting-Creep Interaction
Srimant Kumar Mishra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Comparative Evaluation of Cast Aluminum Alloys for Automotive Cylinder Heads: Part I-Microstructure Evolution
Shibayan Roy et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Comparative Evaluation of Cast Aluminum Alloys for Automotive Cylinder Heads: Part II-Mechanical and Thermal Properties
Shibayan Roy et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Effect of zirconium on microstructures and mechanical properties of squeeze cast Al-5.0Cu-0.4Mn-0.1Ti-0.1RE alloy
Meng Fan-sheng et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2017)
Effect of Solidification Rate and Rare Earth Metal Addition on the Microstructural Characteristics and Porosity Formation in A356 Alloy
M. G. Mahmoud et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)
Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model
Qiang Du et al.
ACTA MATERIALIA (2017)
Effect of Sc addition on the microstructure and wear properties of A356 alloy and A356-TiB2 in situ composite
S. L. Pramod et al.
MATERIALS & DESIGN (2015)
Interaction between molybdenum and manganese to form effective dispersoids in an Al-Si-Cu-Mg alloy and their influence on creep resistance
A. R. Farkoosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Dispersoid strengthening of a high temperature Al-Si-Cu-Mg alloy via Mo addition
A. R. Farkoosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of erbium modification on the microstructure and mechanical properties of A356 aluminum alloys
Z. M. Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Deformation-induced dissolution and growth of precipitates in an Al-Mg-Er alloy during high-cycle fatigue
M. Song et al.
ACTA MATERIALIA (2014)
Application of cast Al-Si alloys in internal combustion engine components
Mousa Javidani et al.
INTERNATIONAL MATERIALS REVIEWS (2014)
The study on the coarsening process and precipitation strengthening of Al3Er precipitate in Al-Er binary alloy
Yi Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Structure and properties of cast Al-Si based alloy with Zr-V-Ti additions and its evaluation of high temperature performance
Wojciech Kasprzak et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of Rare Earth Addition on Microstructure and Mechanical Properties of Al-Si Alloys: An Overview
S. L. Joy-Yii et al.
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1 (2014)
Modeling creep damage of an aluminum-silicon eutectic alloy
Holm Altenbach et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2013)
Influences of Nickel and Vanadium Impurities on Microstructure of Aluminum Alloys
Suming Zhu et al.
JOM (2013)
Precipitation evolution in Al-Er-Zr alloys during aging at elevated temperature
S. P. Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
The effects of manganese on the T-phase and creep resistance in Al-Si-Cu-Mg-Ni alloys
A. R. Farkoosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
High Temperature Mechanical Properties of Al-Si-Mg-(Cu) Alloys for Automotive Cylinder Heads
Chang-Yeol Jeong
MATERIALS TRANSACTIONS (2013)
Age Hardening Behavior and Corresponding Microstructure of Dilute Al-Er-Zr Alloys
H. Huang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Effect of Mg and semi solid processing on microstructure and impression creep properties of A356 alloy
B. Amir Esgandari et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy
Xiaowu Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Constitutive behavior of as-cast A356
M. J. Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Precipitation evolution and coarsening resistance at 400 °C of Al microalloyed with Zr and Er
Hongying Li et al.
SCRIPTA MATERIALIA (2012)
Coarsening resistance at 400 °C of precipitation-strengthened Al-Zr-Sc-Er alloys
Christopher Booth-Morrison et al.
ACTA MATERIALIA (2011)
OPTIMIZATION OF AN ALUMINUM CYLINDER HEAD ALLOY OF THE AlSi7Cu3MnMg TYPE REINFORCED BY ADDITIONS OF PERITECTIC ELEMENTS
M. Garat
INTERNATIONAL JOURNAL OF METALCASTING (2011)
Precipitation hardening of cast Zr-containing A356 aluminium alloy
B. Baradarani et al.
MATERIALS & DESIGN (2011)
HRTEM and ADF-STEM of precipitates at peak-ageing in cast A356 aluminium alloy
N. Chomsaeng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys
Yu-Chou Tsai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effect of microstructure on mechanical properties for A356 casting alloy
C. Y. Jeong et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2008)
Criteria for developing castable, creep-resistant aluminum-based alloys - A review
KE Knipling et al.
ZEITSCHRIFT FUR METALLKUNDE (2006)
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys:: Part II-coarsening of Al3(Sc1-xZrx) precipitates
CB Fuller et al.
ACTA MATERIALIA (2005)
Segregation in Al3(Sc,Zr) precipitates in Al-Sc-Zr alloys
A Tolley et al.
SCRIPTA MATERIALIA (2005)
The influence of alloy composition on precipitates of the Al-Mg-Si system
CD Marioara et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation
Y Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
分享论文
