相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。High methanol resistant polyelectrolyte membrane based on semi-crystalline Poly(ether ketone) with densely sulfonated side chain for direct methanol fuel cell
Di Liu et al.
JOURNAL OF POWER SOURCES (2021)
Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review
Shivam Verma et al.
EUROPEAN POLYMER JOURNAL (2021)
Thermomechanical behaviors of polyether ether ketone (PEEK) with stretch-induced anisotropy
Ming Lei et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
Fused deposition modeling of poly(ether ether ketone) scaffolds
Xiaohui Song et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2021)
Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK
D. Barba et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Dual cross-linked polymer electrolyte membranes based on poly(aryl ether ketone) and poly(styrene-vinylimidazole-divinylbenzene) for high temperature proton exchange membrane fuel cells
Jingshuai Yang et al.
JOURNAL OF POWER SOURCES (2020)
3D printing of polyether-ether-ketone for biomedical applications
Sunpreet Singh et al.
EUROPEAN POLYMER JOURNAL (2019)
Biaxial characterization of poly(ether-ether-ketone) for thermoforming: A comparison between bulge and in-plane biaxial testing
Josh A. Turner et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Modelling the Temperature Dependent Biaxial Response of Poly(ether-ether-ketone) Above and Below the Glass Transition for Thermoforming Applications
Josh A. Turner et al.
POLYMERS (2019)
Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes
Gwomei Wu et al.
POLYMERS (2019)
Thermomechanical model for monotonic and cyclic loading of PEEK
Wenlong Li et al.
MECHANICS OF MATERIALS (2019)
Effect of annealing on the viscoelastic behavior of poly(ether-ether-ketone)
Zhiyuan Jiang et al.
POLYMER (2019)
Investigations on the suitability of PEEK material under space environment conditions and its application in a parabolic space antenna
Sahil Kalra et al.
ADVANCES IN SPACE RESEARCH (2019)
Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview
Abid Haleem et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)
Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK)
N. Abbasnezhad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Constitutive modeling for the accurate characterization of the tension behavior of PEEK under small strain
Baoning Chang et al.
POLYMER TESTING (2018)
Modeling the non-isothermal viscoelastic response of glassy polymers
A. D. Drozdov et al.
ACTA MECHANICA (2018)
Structure-property relationships in commercial polyetheretherketone resins
Manuel Garcia-Leiner et al.
POLYMER ENGINEERING AND SCIENCE (2017)
Characterization of highly sulfonated PEEK based membrane for the fuel cell application
Deuk Ju Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: Application to PEEK under dynamic loading conditions
D. Garcia-Gonzalez et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Highly stable ionic-covalent cross-linked sulfonated poly(ether ether ketone) for direct methanol fuel cells
Linfeng Lei et al.
JOURNAL OF POWER SOURCES (2017)
A thermo-mechanically coupled nonlinear viscoelastic-viscoplastic cyclic constitutive model for polymeric materials
Chao Yu et al.
MECHANICS OF MATERIALS (2017)
Nanoindentation of high performance semicrystalline polymers: A case study on PEEK
George Z. Voyiadjis et al.
POLYMER TESTING (2017)
Experimental investigation and constitutive modeling of the deformation behavior of Poly-Ether-Ether-Ketone at elevated temperatures
Bing Zheng et al.
POLYMER TESTING (2017)
Hot tensile fracture characteristics and constitutive modelling of polyether-ether-ketone (PEEK)
Fei Chen et al.
POLYMER TESTING (2017)
On compression and damage evolution in two thermoplastics
N. K. Bourne et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2017)
Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers
M. Flanagan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Cyclic deformation and fatigue behavior of polyether ether ketone (PEEK)
Rakish Shrestha et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Polyetheretherketone (PEEK) for medical applications
Ivan Vladislavov Panayotov et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
A constitutive model of polyether-ether-ketone (PEEK)
Fei Chen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Strain rate sensitivity of polyetheretherketone's compressive yield stress at low and high temperatures
Zakaria El-Qoubaa et al.
MECHANICS OF MATERIALS (2016)
Mean strain effects on cyclic deformation and fatigue behavior of polyether ether ketone (PEEK)
Rakish Shrestha et al.
POLYMER TESTING (2016)
Sensitivity of nanoindentation strain rate in poly(ether-ether-ketone) using atomic force microscopy
Ying Yang et al.
POLYMER TESTING (2016)
Effect of the varied load conditions on the tribological performance and the thermal characteristics of PEEK-based hybrid composites
Leyu Lin et al.
TRIBOLOGY INTERNATIONAL (2016)
Mechanical impact behavior of polyether-ether-ketone (PEEK)
D. Garcia-Gonzalez et al.
COMPOSITE STRUCTURES (2015)
Dynamic mechanical response of polyetheretherketone (PEEK) exposed to cyclic loads in the high stress tensile regime
M. Berer et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Characterization and modeling of the strain rate sensitivity of polyetheretherketone's compressive yield stress
Zakaria El-Qoubaa et al.
MATERIALS & DESIGN (2015)
Cyclic viscoplasticity of semicrystalline polymers with finite deformations
A. D. Drozdov et al.
MECHANICS OF MATERIALS (2013)
Sulfonated PEEK-based polymers in PEMFC and DMFC applications: A review
Adolfo Iulianelli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
High-performance nanocomposites based on polyetherketones
Ana M. Diez-Pascual et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Influence of Molecular Weight on Rheological, Thermal, and Mechanical Properties of PEEK
Mingjun Yuan et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Notched fatigue behavior of PEEK
Michacl C. Sobieraj et al.
BIOMATERIALS (2010)
Effect of temperature on the viscoelastic and viscoplastic behavior of polypropylene
A. D. Drozdov
MECHANICS OF TIME-DEPENDENT MATERIALS (2010)
A large deformation theory for rate-dependent elastic-plastic materials with combined isotropic and kinematic hardening
David L. Henann et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Isothermal physical aging characterization of Polyether-ether-ketone (PEEK) and Polyphenylene sulfide (PPS) films by creep and stress relaxation
Yunlong Guo et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2007)
The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response
P. J. Rae et al.
POLYMER (2007)
Taylor impact of polyether ether ketone
JCF Millett et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)
Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress
J Richeton et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Constitutive equations in finite viscoplasticity of semicrystalline polymers
AD Drozdov et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Modeling relaxation of a polymeric composite during loading and unloading
W Kim et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
分享论文
