4.7 Review

Silicone Rubber Composites Reinforced by Carbon Nanofillers and Their Hybrids for Various Applications: A Review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Mechanical behaviors of graphene/copper matrix composite foils fabricated by pulse electrodeposition

Kun Xia Wei et al.

Summary: Graphene/copper composite foils were fabricated via pulse electrodeposition with graphene nanoplates dispersed in copper matrix. The variation of graphene concentration in the composite foils affected their tensile strength and hardness.

SURFACES AND INTERFACES (2021)

Article Chemistry, Applied

Investigation of silicone rubber composites reinforced with carbon nanotube, nanographite, their hybrid, and applications for flexible devices

Vineet Kumar et al.

Summary: New technology is necessary for updating new generation flexible devices such as stretchable sensors, flexible electronics, and actuators. In this study, a stretchable strain sensor and actuator were developed based on RTV silicone rubber reinforced with carbon nanotubes (CNTs), nanographite (GR), and CNT-GR hybrids, showing improved mechanical properties for real-life applications.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Synergistic strengthening effect of titanium matrix composites reinforced by graphene oxide and carbon nanotubes

Liangxiao Wei et al.

Summary: Titanium matrix composites reinforced by graphene oxide (GO) and carbon nanotube (CNT) were successfully prepared by hot-pressing sintering. The addition of GO significantly improved the dispersion of CNT and led to the formation of TiC particles in the composite. A significant synergetic effect was observed between GO and CNT, enhancing the mechanical properties of the composite.

MATERIALS & DESIGN (2021)

Article Chemistry, Physical

Understanding interfacial interaction characteristics of carbon nitride reinforced epoxy composites from atomistic insights

Wei-Ming Ji et al.

Summary: The study reveals that C3N exhibits superior performance in improving the thermal-mechanical properties of epoxy composites compared to GN, mainly attributed to the interfacial interaction mechanism between C3N and epoxy chains.

CARBON (2021)

Article Chemistry, Physical

Exploiting the synergetic effects of graphene and carbon nanotubes on the mechanical properties of bitumen composites

Qilin Yang et al.

Summary: Functional carbon nanomaterials, specifically graphene/carbon nanotube (CNT) hybrid materials, were successfully incorporated in bitumen composites to improve their mechanical performance through enhanced dispersion and interfacial interactions. The hybrid structure notably improved several key properties of the bitumen structure, leading to optimal mechanical performance in bitumen binders with specific weight ratios of graphene and CNT composite. The synergistic effects of the hybrid structures effectively enhanced stress transfer at the interface between the carbon nanomaterials and the bitumen matrix.

CARBON (2021)

Article Materials Science, Composites

Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties

Xinping Zhang et al.

Summary: Effective and facile strategies involving macromolecular functionalization and cross-linkable crystalline component incorporation have been proposed to fabricate tire composite materials with balanced integrated performances in this study. The introduction of cross-linkable crystalline component led to complex phase morphology and enhanced filler dispersion in the rubber blends, resulting in excellent integrated properties of the rubber composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Polymer Science

Filler-polymer interaction investigated using graphitized carbon blacks: Another attempt to explain reinforcement

Jan Plagge et al.

Summary: This study investigates the relationship between filler surface properties and compound properties, focusing on large-strain softening effects in EPDM filled with carbon blacks treated at different temperatures. The results suggest that the reinforcement effect is best explained by chemical filler-polymer bonds, while low-strain modulus and equilibrium hysteresis are influenced by physical compatibility.

POLYMER (2021)

Article Materials Science, Multidisciplinary

Study on mechanical properties and wear behavior of in-situ synthesized CNTs/CuCrZrY composites prepared by spark plasma sintering

Honglei Zhou et al.

Summary: The CNTs/CuCrZrY composites prepared with specific treatments exhibit excellent mechanical properties and thermal stability, with significantly improved tensile strength compared to Cu and CuCrZrY composites, as well as significantly reduced sliding friction coefficients.

VACUUM (2021)

Article Construction & Building Technology

A novel titania/graphene composite applied in reinforcing microstructural and mechanical properties of alkali-activated slag

Jie Ren et al.

Summary: This study improved the microstructure and mechanical properties of alkali-activated slag pastes by using a new intercalating method with a titania/graphene composite. The results showed that increasing the content of the composite led to improved compressive strength, flexural strength, and Young's modulus, as well as enhanced fractural behaviors for the AAS pastes.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Engineering, Manufacturing

Effect of nano-scale Cu particles on the electrical property of CNT/polymer nanocomposites

Yang Wang et al.

Summary: The electrical conductivity of Cu/CNT/polymer composites was systematically studied through experiments and simulations, revealing that the inclusion of Cu particles on the surface of CNT significantly enhances the conductivity of the composite material. By analyzing the core mechanism, it was determined that the high conductivity and cladding rate of nano-scale Cu particles are the main factors contributing to the improved electrical properties of the composite.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Engineering, Manufacturing

Exceptionally thermally conductive and electrical insulating multilaminar aligned silicone rubber flexible composites with highly oriented and dispersed filler network by mechanical shearing

Yang Xue et al.

Summary: The design of multilayered structure network is an effective strategy to enhance thermal conductivity and maintain electrical insulating performance of thermal management materials. By layer by layer assembly of prefabricated silicone rubber/boron nitride and silicone rubber/expanded graphite, a highly oriented and dispersed filler network was successfully constructed. The study demonstrates that the multilayered hybrid material exhibits excellent thermal conductivity and electrical insulation properties.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Polymer Science

Mechanical and magnetic response of magneto-rheological elastomers with different types of fillers and their hybrids

Vineet Kumar et al.

Summary: The study found that MREs hybridized with CNT show the highest compressive mechanical properties. Nanofillers with higher aspect ratio, like CNT, have a stronger effect on isotropic mechanical properties, while fillers with lower aspect ratios, like FLG, have a greater impact on magnetic sensitivity. Iron wires, despite only slightly improving mechanical properties, can enhance the magnetic sensitivity of MREs due to their strong magnetic behavior.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Nanoscience & Nanotechnology

Analytical models of the strength and ductility of CNT reinforced metal matrix nano composites under elevated temperatures

Shutao Song et al.

Summary: A temperature-dependent strengthening analytical model is proposed for carbon nanotube reinforced metal matrix composites, considering three common strengthening mechanisms. The model can predict composite material strength and, when combined with a ductility analytical model, can analyze ductility loss. The models provide guidance for new material design and processing.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Polymer Science

Properties of Silicone Rubber-Based Composites Reinforced with Few-Layer Graphene and Iron Oxide or Titanium Dioxide

Vineet Kumar et al.

Summary: This study demonstrated that the inclusion of iron oxide (Fe3O4) or TiO2 fillers in RTV-SR improves mechanical, actuation, and magnetic properties. Mechanical properties were enhanced by filler addition, with actuation displacements being influenced by the type of nanofiller and applied voltage. The magnetic stress-relaxation was also affected by filler amount, with stress-relaxation rates decreasing under a magnetic field applied parallel to the deformation axes.

POLYMERS (2021)

Article Engineering, Multidisciplinary

Electrical behavior of CNT epoxy composites under in-situ simulated space environments

Brian Earp et al.

Summary: The study measured the electrical properties of CNT epoxy composites with low CNT loadings under simulated space conditions, revealing a reduction in resistivity of up to 40% under high temperatures and low pressures, and up to 58% under simulated sunlight. These changes are believed to be due to outgassing and increased temperatures.

COMPOSITES PART B-ENGINEERING (2021)

Article Chemistry, Physical

Novel preparation of high-yield graphene and graphene/ZnO composite

Jing Zhang et al.

Summary: This paper efficiently prepared high-yield graphene and visible light-driven photocatalyst graphene/ZnO composite by combining ball-milling and liquid-phase exfoliation under mild conditions. The unique features of this approach include the increased yield of graphene, convenient obtaining of GR/ZnO composite, and easy removal of ZnO-PVA particles from the graphene solution.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Review Materials Science, Multidisciplinary

Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: Advancement, opportunities and perspective

Virat Khanna et al.

Summary: The rapid development of the mechanical industry requires new and reliable materials, with Metal Matrix Composites (MMCs) being one of the prominent candidates. Carbon nanostructures, such as graphene and carbon nanotubes (CNTs), are found to be excellent support reinforcement materials in MMCs. The study evaluates the impact of graphene/CNTs reinforcement in aluminum for improvement in mechanical properties, as well as reviewing different processing methods.

MATERIALS RESEARCH BULLETIN (2021)

Article Nanoscience & Nanotechnology

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs

Xia Wei et al.

Summary: The study introduces a novel approach by surface and intratube decoration of CNTs to achieve uniform dispersion and strengthening of Cu matrix composite. The strategy results in simultaneous improvement of strength, ductility, and conductivity, providing a new idea to tackle dilemmas in CNTs reinforced metal matrix composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Optics

Direct laser writing of copper-graphene composites for flexible electronics

Jianing Liao et al.

Summary: A simple low-temperature method for preparing highly conductive and electrochemically active copper-graphene composites has been proposed, which can be applied in the field of flexible electronics with the advantages of rapid and low cost.

OPTICS AND LASERS IN ENGINEERING (2021)

Article Chemistry, Analytical

Stretchable Strain Sensor with Controllable Negative Resistance Sensitivity Coefficient Based on Patterned Carbon Nanotubes/Silicone Rubber Composites

Rong Dong et al.

Summary: A stretchable strain sensor with controllable negative resistance sensitivity coefficient is proposed in this paper. By adjusting the density and resistance of carbon nanotubes between layers of silica gel, the sensor shows a resistance sensitivity coefficient where the resistance decreases after stretching.

MICROMACHINES (2021)

Article Materials Science, Multidisciplinary

Natural fillers as reinforcement for closed-molded polyurethane foam plaques: Mechanical, morphological, and thermal properties

Syed Muhammad Husainie et al.

Summary: Natural fillers like cellulose, chitin, hazelnut, and eggshell were added to polyurethane foam in varying percentages in this study, showing improvements in tensile strength and resilience with 1% fiber loading. However, split tear properties decreased. Morphological analysis confirmed uniform dispersion of fillers. This study supports the potential for a sustainable future by replacing synthetic fillers with natural alternatives in various industries.

MATERIALS TODAY COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: Mechanical and piezoelectric actuation performance

Vineet Kumar et al.

Summary: The study demonstrates that incorporating nanofillers with high surface area and purity into rubber-based composites can enhance mechanical properties and actuation displacement.

NANO MATERIALS SCIENCE (2021)

Proceedings Paper Materials Science, Multidisciplinary

Effect of titanium carbide powder as a filler on the mechanical properties of silicone rubber

S. Guruswamy Yadav et al.

Summary: Silicone rubber, a commonly used polymer, possesses properties such as high and low temperature stability, high elasticity, and durability. The addition of different proportions of Titanium Carbide particles affects the mechanical properties of silicone rubber, including hardness, tensile strength, and tear strength.

MATERIALS TODAY-PROCEEDINGS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Improving the mechanical properties of natural rubber composite with carbon black (N220) as filler

K. Sivaselvi et al.

Summary: Rubber is one of the most commonly used materials globally, with synthetic rubber widely used in windshield wiper blades for automobiles. The research focuses on replacing synthetic compounds with natural materials to enhance durability and eco-friendliness in wiper blades.

MATERIALS TODAY-PROCEEDINGS (2021)

Review Materials Science, Multidisciplinary

Recent progress in the synthesis of graphene/CNT composites and the energy-related applications

Xin Wu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Characterization & Testing

Synergistic effect by high specific surface area carbon black as secondary filler in silica reinforced natural rubber tire tread compounds

Suppachai Sattayanurak et al.

POLYMER TESTING (2020)

Article Engineering, Electrical & Electronic

Structure-property relationship in silicone rubber nanocomposites reinforced with carbon nanomaterials for sensors and actuators

Vineet Kumar et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Article Nanoscience & Nanotechnology

Skin-like Ultrasensitive Strain Sensor for Full-Range Detection of Human Health Monitoring

Zijing Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Mechanically Programmable Dip Molding of High Aspect Ratio Soft Actuator Arrays

Kaitlyn P. Becker et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Materials Science, Multidisciplinary

Carbon nanotube film based flexible bi-directional strain sensor for large deformation

Lifeng Ma et al.

MATERIALS LETTERS (2020)

Article Engineering, Electrical & Electronic

Comparison of Wearable Sensors for Estimation of Chewing Strength

Delwar Hossain et al.

IEEE SENSORS JOURNAL (2020)

Article Engineering, Manufacturing

Vertically aligned silicon carbide nanowires/reduced graphene oxide networks for enhancing the thermal conductivity of silicone rubber composites

Jianan Song et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Materials Science, Multidisciplinary

Payne effect: A Constitutive model based on a dynamic strain amplitude dependent spectrum of relaxation time

D. Jalocha

MECHANICS OF MATERIALS (2020)

Article Materials Science, Characterization & Testing

Fabrication of exfoliated graphite reinforced silicone rubber composites - Mechanical, tribological and dielectric properties

P. S. Sarath et al.

POLYMER TESTING (2020)

Article Engineering, Multidisciplinary

Modeling Payne effect with a framework of multiple natural configurations

S. P. Atul Narayan et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

Article Materials Science, Composites

Monotonic strain sensing behavior of self-assembled carbon nanotubes/graphene silicone rubber composites under cyclic loading

Heng Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Materials Science, Composites

Improved thermal conductivity and AC dielectric breakdown strength of silicone rubber/BN composites

Maryam Sarkarat et al.

COMPOSITES PART C: OPEN ACCESS (2020)

Article Materials Science, Composites

Morphological aspects of carbon nanofillers and their hybrids for actuators and sensors

Vineet Kumar et al.

POLYMER COMPOSITES (2019)

Article Materials Science, Multidisciplinary

Flexible and multi-form solid-state supercapacitors based on polyaniline/graphene oxide/CNT composite films and fibers

Qiaoya Jiang et al.

DIAMOND AND RELATED MATERIALS (2019)

Article Materials Science, Multidisciplinary

Silica-Reinforced Natural Rubber: Synergistic Effects by Addition of Small Amounts of Secondary Fillers to Silica-Reinforced Natural Rubber Tire Tread Compounds

S. Sattayanurak et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)

Article Chemistry, Multidisciplinary

3D Thermally Cross-Linked Graphene Aerogel-Enhanced Silicone Rubber Elastomer as Thermal Interface Material

Wenya Zhang et al.

ADVANCED MATERIALS INTERFACES (2019)

Article Materials Science, Composites

Effect of particle size and size distribution on the permeability of soft magnetic liquid silicone rubber composites

Dirk W. Schubert et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Engineering, Multidisciplinary

Highly sensitive natural rubber/pristine graphene strain sensor prepared by a simple method

Haijun Liu et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Chemistry, Physical

Effects of purity in single-wall carbon nanotubes into rubber nanocomposites

Vineet Kumar et al.

CHEMICAL PHYSICS LETTERS (2019)

Article Polymer Science

Interphase-layer effect on deformation of silicone rubber filled with nanosilica particles

Tadaharu Adachi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Article Engineering, Manufacturing

Strong linear-piezoresistive-response of carbon nanostructures reinforced hyperelastic polymer nanocomposites

Muhamad F. Arif et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Engineering, Chemical

Integration of carbon allotropes into polydimethylsiloxane to control the electrical conductivity for novel fields of application

Tilo Koeckritz et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

Article Materials Science, Multidisciplinary

High performance strain sensors based on chitosan/carbon black composite sponges

Yongwang Liu et al.

MATERIALS & DESIGN (2018)

Article Materials Science, Composites

Highly sensitive and stretchable graphene-silicone rubber composites for strain sensing

Heng Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Polymer Science

Studies of nanocomposites based on carbon nanomaterials and RTV silicone rubber

Vineet Kumar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Article Chemistry, Physical

Oxidation, defunctionalization and catalyst life cycle of carbon nanotubes: a Raman spectroscopy view

Sergei A. Chernyak et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Polymer Science

Effects of thinner on RTV silicone rubber nanocomposites reinforced with GR and CNTs

Vineet Kumar et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

Article Chemistry, Multidisciplinary

Flexible and Degradable Paper-Based Strain Sensor with Low Cost

Hanbin Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Materials Science, Composites

Improved mechanical properties of carbon fiber-reinforced epoxy composites by growing carbon black on carbon fiber surface

Jidong Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Manufacturing

Largely improved thermal conductivity of HDPE/expanded graphite/carbon nanotubes ternary composites via filler network-network synergy

Junjin Che et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Engineering, Multidisciplinary

Fabrication of graphene/natural rubber nanocomposites with high dynamic properties through convenient mechanical mixing

Hailan Kang et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Materials Science, Composites

Mechanical and electrical behavior of rubber nanocomposites under static and cyclic strain

Jin-Yong Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Manufacturing

Influence of processing conditions on dispersion, electrical and mechanical properties of graphene-filled-silicone rubber composites

Hui Xu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Engineering, Multidisciplinary

Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black

Yun-Hong Zhao et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Materials Science, Characterization & Testing

Studies of RTV silicone rubber nanocomposites based on graphitic nanofillers

Vineet Kumar et al.

POLYMER TESTING (2016)

Article Materials Science, Multidisciplinary

A decade of graphene research: production, applications and outlook

Edward P. Randviir et al.

MATERIALS TODAY (2014)

Editorial Material Chemistry, Physical

All in the graphene family - A recommended nomenclature for two-dimensional carbon materials

Alberto Bianco et al.

CARBON (2013)

Review Physics, Multidisciplinary

Review of graphene-based strain sensors

Zhao Jing et al.

CHINESE PHYSICS B (2013)

Review Multidisciplinary Sciences

A Review on Silicone Rubber

Subhas C. Shit et al.

NATIONAL ACADEMY SCIENCE LETTERS-INDIA (2013)

Article Polymer Science

MODIFIED GUTH-GOLD EQUATION FOR CARBON BLACK-FILLED RUBBERS

Y. Fukahori et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2013)

Article Chemistry, Physical

Chemically Reduced Graphite Oxide with Improved Shape Anisotropy

Marco Mauro et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Review Polymer Science

Multiwall carbon nanotube elastomeric composites: A review

Liliane Bokobza

POLYMER (2007)

Article Chemistry, Physical

The rise of graphene

A. K. Geim et al.

NATURE MATERIALS (2007)

Review Materials Science, Multidisciplinary

The reinforcement of elastomeric networks by fillers

L Bokobza

MACROMOLECULAR MATERIALS AND ENGINEERING (2004)