相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Toughening Polylactic Acid by a Biobased Poly(Butylene 2,5-Furandicarboxylate)-b-Poly(Ethylene Glycol) Copolymer: Balanced Mechanical Properties and Potential Biodegradability
Chao Chen et al.
BIOMACROMOLECULES (2021)
Toward strong and super-toughened PLA via incorporating a novel fully bio-based copolyester containing cyclic sugar
Lu He et al.
COMPOSITES PART B-ENGINEERING (2021)
Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay
Mohammadreza Nofar et al.
COMPOSITES PART B-ENGINEERING (2020)
Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites
Xiaodong Xu et al.
COMPOSITES PART B-ENGINEERING (2020)
Influence of the morphology and viscoelasticity on the thermomechanical properties of poly(lactic acid)/thermoplastic polyurethane blends compatibilized with ethylene-ester copolymer
Giordano Pierozan Bernardes et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
A sustainable wood biorefinery for low-carbon footprint chemicals production
Yuhe Liao et al.
SCIENCE (2020)
Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composites
Yiqi Sun et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends
Mohammadreza Nofar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Gas Transport Phenomena and Polymer Dynamics in PHB/PLA Blend Films as Potential Packaging Materials
Valentina Siracusa et al.
POLYMERS (2020)
Simultaneously Grafting Poly(lactic acid) (PLLA) and Polyethylene (PE) Chains onto a Reactive SG Copolymer: Formation of Supertough PLLA/PE Blends by Reactive Processing
Qunli Yu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly (ε-caprolactone)-poly(d-lactide) as compatibilizer
Xianglian Xiao et al.
COMPOSITES COMMUNICATIONS (2020)
Improvement of mechanical and impact performance of poly(lactic acid) by renewable modified natural rubber
Wasan Tessanan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Shen Su et al.
POLYMERS (2019)
Crystallization, rheology and mechanical properties of the blends of poly(l-lactide) with supramolecular polymers based on poly(d-lactide)-poly(ε-caprolactone-co-δ-valerolactone)-poly(d-lactide) triblock copolymers
Zhanxin Jing et al.
RSC ADVANCES (2019)
Preparation of plasticized poly (lactic acid) and its influence on the properties of composite materials
Decai Li et al.
PLOS ONE (2018)
A gelatin/PLA-b-PEG film of excellent gas barrier and mechanical properties
Lijun Ji et al.
JOURNAL OF POLYMER RESEARCH (2018)
Bulk Modification of Poly(lactide) (PLA) via Copolymerization with Poly(propylene glycol) Diglycidylether (PPGDGE)
Sandra Castillejos et al.
POLYMERS (2018)
Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies
M. Nofar et al.
EUROPEAN POLYMER JOURNAL (2017)
Lifetime prediction of biodegradable polymers
Bronwyn Laycock et al.
PROGRESS IN POLYMER SCIENCE (2017)
Tensile Property Balanced and Gas Barrier Improved Poly(lactic acid) by Blending with Biobased Poly(butylene 2,5-furan dicarboxylate)
Yu Long et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Poly(lactic acid) blends in biomedical applications
P. Saini et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Effects of isothermal crystallization on the mechanical properties of a elastomeric medium chain length polyhydroxyalkanoate
A. Larranaga et al.
EUROPEAN POLYMER JOURNAL (2016)
Hollow segmented-pie PLA/PBS and PLA/PP bicomponent fibers: an investigation on fiber properties and splittability
Chureerat Prahsarn et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Blending poly(butylene succinate) with poly(lactic acid): Ductility and phase inversion effects
Y. Deng et al.
EUROPEAN POLYMER JOURNAL (2015)
Properties and medical applications of polylactic acid: A review
K. Hamad et al.
EXPRESS POLYMER LETTERS (2015)
Super toughened biodegradable polylactide blends with non-linear copolymer interfacial architecture obtained via facile in-situ reactive compatibilization
Vincent Ojijo et al.
POLYMER (2015)
The Morphology, Properties, and Shape Memory Behavior of Polylactic Acid/Thermoplastic Polyurethane Blends
Xin Jing et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Marc A. Hillmyer et al.
ACCOUNTS OF CHEMICAL RESEARCH (2014)
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Kunyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Zinc Oxide Nanoparticles Catalyze Rapid Hydrolysis of Poly( lactic acid) at Low Temperatures
Meng Qu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Reactive Compatibilization of PLA/ TPU Blends with a Diisocyanate
Sebnem Kemaloglu Dogan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Natural Polymers and Additives in Commodity and Specialty Applications: A Challenge for the Chemistry of Future
Mario Malinconico et al.
MACROMOLECULAR SYMPOSIA (2014)
Compatibilization in bio-based and biodegradable polymer blends
B. Imre et al.
EUROPEAN POLYMER JOURNAL (2013)
Processing and characterization of poly(lactic acid) based bioactive composites for biomedical scaffold application
J. Goswami et al.
EXPRESS POLYMER LETTERS (2013)
Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature
Xiaohui Chen et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2013)
Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents
P. Ma et al.
EUROPEAN POLYMER JOURNAL (2012)
Toughness enhancement of poly(lactic acid) by melt blending with natural rubber
Ruedee Jaratrotkamjorn et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Synthesis, structure and properties of poly(L-lactide-co-ε-caprolactone) statistical copolymers
Jorge Fernandez et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Morphologies and Mechanical Properties of Polylactide/Thermoplastic Polyurethane Elastomer Blends
Fei Feng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Preparation and Characterization of Biodegradable Polylactide/Thermoplastic Polyurethane Elastomer Blends
Juan-Juan Han et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
A Novel Composite Coupled Hardness with Flexibleness-Polylactic Acid Toughen with Thermoplastic Polyurethane
Hua Hong et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Research Progress in Toughening Modification of Poly(lactic acid)
Hongzhi Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Structure and properties of polylactide/natural rubber blends
N. Bitinis et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Segmented copolymers with monodisperse crystallizable hard segments: Novel semi-crystalline materials
Reinoud J. Gaymans
PROGRESS IN POLYMER SCIENCE (2011)
Tough Polylactide Graft Copolymers
Grayce Theryo et al.
MACROMOLECULES (2010)
Processing and Characterization of Poly(lactic acid) Films Plasticized with Commercial Adipates
V. P. Martino et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Modification of brittle polylactide by novel hyperbranched polymer-based nanostructures
Rahul Bhardwaj et al.
BIOMACROMOLECULES (2007)
Toughening of polylactide by melt blending with a biodegradable poly(ether)urethane elastomer
Yongjin Li et al.
MACROMOLECULAR BIOSCIENCE (2007)
Plasticization of semicrystalline poly(L-lactide) with poly(propylene glycol)
E. Piorkowska et al.
POLYMER (2006)
Plasticization of poly(L-lactide) with poly(propylene glycol)
Z. Kulinski et al.
BIOMACROMOLECULES (2006)
Stereocomplexed polylactides (Neo-PLA) as high-performance bio-based polymers: their formation, properties, and application
Kazuki Fukushima et al.
POLYMER INTERNATIONAL (2006)
Stress-strain behavior of thermoplastic polyurethanes
HJ Qi et al.
MECHANICS OF MATERIALS (2005)
An overview of polylactides as packaging materials
R Auras et al.
MACROMOLECULAR BIOSCIENCE (2004)
Characterization of TPU-elastomers by thermal analysis (DSC)
A Frick et al.
POLYMER TESTING (2004)
Toughening of polylactide by melt blending with linear low-density polyethylene
KS Anderson et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
分享论文
