☆ 4.6 Article

Effect of Loading Frequency Ratio on Multiaxial Asynchronous Fatigue Failure of 30CrMnSiA Steel

MATERIALS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Fatigue life analysis of steel bicycle frame according to ISO 4210

Tomasz Tomaszewski

Summary: This study estimated the fatigue life of a bicycle frame after fatigue failure due to operational loads, by comparing experimental data using finite element analysis and a Weibull model. The analysis found that operating conditions, such as the angle of force applied to the bicycle pedals, can significantly affect the fatigue life of the frame.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

A sectional critical plane model for multiaxial high-cycle fatigue life prediction

Xinxin Qi et al.

Summary: A stress-based sectional critical plane model is proposed to predict fatigue life under multiaxial constant amplitude loading, considering material properties and loading paths. The model divides critical planes into three sections based on the ratio of maximum shear stress amplitude to maximum normal stress amplitude. Experimental data support the strong applicability of the model for steel, aluminum, and titanium alloy materials, especially under multiaxial loadings with mean stresses. Prediction results show that the proposed model performs better than commonly used criteria for steel materials.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue of four metallic materials under asynchronous loadings: Small cracks observation and fatigue life prediction

Lukasz Pejkowski et al.

Summary: This study investigates the damage mechanisms and fatigue life prediction of different materials under multiaxial loading through observation of small cracks on the surface of fatigued specimens. It identified the crack damage mechanisms of different materials and their correlation with the quality of fatigue life prediction.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Engineering, Mechanical

Multiaxial fatigue tests under variable strain paths and asynchronous loading and assessment of fatigue life using critical plane models

Punit Arora et al.

Summary: The present study showed that the saturated cyclic stress-strain behavior under a given strain path is not significantly affected by loading history, while the transient material behavior is history dependent. The Fatemi-Socie (FS) and Arora et al. models accurately predicted fatigue life under both loading categories.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Fatigue life and fatigue crack growth rate analysis of high strength low alloy steel (42CrMo4)

R. Pandiyarajan et al.

Summary: This study investigates the fatigue life and fatigue crack growth rate of large diameter ball bearings under cyclic loading conditions using numerical and experimental methods. The research explores the crack propagation and stress intensity factor under high cycle fatigue loading conditions, with predicted results validated against experimental tests.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Mechanics

Collaborative crack initiation mechanism of 25CrMo4 alloy steels subjected to foreign object damages

S. C. Wu et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Universal cycle counting for non-proportional and random fatigue loading

K. G. F. Janssens

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Isothermal low-cycle fatigue and fatigue-creep of a 42CrMo4 steel

Michal Bartosak et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Crack initiation and propagation of 30CrMnSiA steel under uniaxial and multiaxial cyclic loading

Tianqi Liu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Mechanical

Stress-strain response and fatigue life of four metallic materials under asynchronous loadings: Experimental observations

Lukasz Pejkowski et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Mechanical

Multiaxial high-cycle fatigue failure of 30CrMnSiA steel with mean tension stress and mean shear stress

Tianqi Liu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue crack growth of 42CrMo4 and 41Cr4 steels under different heat treatment conditions

Grzegorz Lesiuk et al.

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY (2018)

添加到收藏夹

Article Engineering, Mechanical

An equivalent stress parameter for multi-axial fatigue evaluation of welded components including non-proportional loading effects

Jifa Mei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Modeling of path-dependent multi-axial fatigue damage in aluminum alloys

Jifa Mei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

A physically short fatigue crack growth approach based on low cycle fatigue properties

S. C. Wu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

A new path-dependent fatigue damage model for non-proportional multi-axial loading

Jifa Mei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Asynchronous multiaxial fatigue damage evaluation

Vitor Anes et al.

3RD INTERNATIONAL CONFERENCE ON MATERIAL AND COMPONENT PERFORMANCE UNDER VARIABLE AMPLITUDE LOADING, VAL 2015 (2015)

添加到收藏夹

Article Engineering, Mechanical

New approach for analysis of complex multiaxial loading paths

V. Anes et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Engineering, Mechanical

New cycle counting method for multiaxial fatigue

Vitor Anes et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Engineering, Mechanical

A rapid path-length searching procedure for multi-axial fatigue cycle counting

Z. Wei et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)

添加到收藏夹

Article Engineering, Mechanical

An improved multiaxial rainflow algorithm for non-proportional stress or strain histories - Part I: Enclosing surface methods

Marco Antonio Meggiolaro et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Mechanical

An improved multiaxial rainflow algorithm for non-proportional stress or strain histories - Part II: The Modified Wang-Brown method

Marco Antonio Meggiolaro et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Fracture Failure Analysis of a 30CrMnSiA Steel Shaft

Xue-Qin Hou et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2012)

添加到收藏夹

Article Mechanics

Fatigue crack growth in railway axles: Assessment concept and validation tests

M. Luke et al.

ENGINEERING FRACTURE MECHANICS (2011)

添加到收藏夹

Article Engineering, Mechanical

Fatigue strength of structural components under multi-axial loading in terms of local energy density averaged on a control volume

F. Berto et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading

M. Noban et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Mechanics

Multiaxial fatigue life assessment of welded structures

Zhigang Wei et al.

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Engineering, Mechanical

A path-dependent cycle counting method for variable-amplitude multi-axial loading

Pingsha Dong et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiaxial loadings with different frequencies between axial and torsional components in 42CrMo4 steel

Luis Reis et al.

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY (2010)

添加到收藏夹

Article Engineering, Mechanical

A study on combined torsion and axial load fatigue limit tests with stresses of different frequencies

A. Bernasconi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Engineering, Mechanical

An experimental evaluation of three critical plane multiaxial fatigue criteria

Yanyao Jiang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Engineering, Mechanical

Deformation behaviour, short crack growth and fatigue lives under multiaxial nonproportional loading

J Hoffmeyer et al.

INTERNATIONAL JOURNAL OF FATIGUE (2006)

添加到收藏夹

Article Engineering, Mechanical

Fatigue analysis under variable amplitude loading using an energy parameter

BL Lee et al.

INTERNATIONAL JOURNAL OF FATIGUE (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.