相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Ultrasonic elastography for nondestructive evaluation of dissimilar material joints
Yuqi Jin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
Nonlinear ultrasonic technique for the characterization of microstructure in additive materialsa)
Aurelio Bellotti et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)
Mechanically tunable ultrasonic metamaterial lens with a subwavelength resolution at long working distances for bioimaging
Teng Yang et al.
SMART MATERIALS AND STRUCTURES (2021)
Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V
Mangesh V. Pantawane et al.
SCIENTIFIC REPORTS (2021)
Manufacturing and Characterization of Hybrid Bulk Voxelated Biomaterials Printed by Digital Anatomy 3D Printing
Hyeonu Heo et al.
POLYMERS (2021)
Longitudinal Monostatic Acoustic Effective Bulk Modulus and Effective Density Evaluation of Underground Soil Quality: A Numerical Approach
Yuqi Jin et al.
APPLIED SCIENCES-BASEL (2021)
Thermomechanically influenced dynamic elastic constants of laser powder bed fusion additively manufactured Ti6Al4V
Mangesh Pantawane et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Residual stresses in additively manufactured AlSi10Mg Raman spectroscopy and X-ray diffraction analysis
Silvia Marola et al.
MATERIALS & DESIGN (2021)
Ultrasound Imaging by Thermally Tunable Phononic Crystal Lens
Yuqi Jin et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
Controlling microstructural and mechanical properties of direct laser deposited Inconel 718 via laser power
Abdullah Alhuzaim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Enhanced Instantaneous Elastography in Tissues and Hard Materials Using Bulk Modulus and Density Determined Without Externally Applied Material Deformation
Yuqi Jin et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2020)
Nondestructive ultrasonic evaluation of fused deposition modeling based additively manufactured 3D-printed structures
Yuqi Jin et al.
SMART MATERIALS AND STRUCTURES (2020)
In-situ Monitoring on Micro-hardness of Laser Molten Zone on AISI4140 Steel by Spectral Analysis
Siyu Wang et al.
SCIENTIFIC REPORTS (2020)
Detection of Internal Holes in Additive Manufactured Ti-6Al-4V Part Using Laser Ultrasonic Testing
Jie Yu et al.
APPLIED SCIENCES-BASEL (2020)
Thermally Tunable Dynamic and Static Elastic Properties of Hydrogel Due to Volumetric Phase Transition
Yuqi Jin et al.
POLYMERS (2020)
Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects
Yuqi Jin et al.
POLYMERS (2020)
Sub-wavelength lateral detection of tissue-approximating masses using an ultrasonic metamaterial lens
Ezekiel L. Walker et al.
NATURE COMMUNICATIONS (2020)
Additive manufacturing of copper/diamond composites for thermal management applications
Loic Constantin et al.
MANUFACTURING LETTERS (2020)
A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD
R. Joey Griffiths et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Interfacial bonding features of friction stir additive manufactured build for 2195-T8 aluminum-lithium alloy
Zijun Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Direct Energy Deposition - Laser Additive Manufacturing of Titanium-Molybdenum alloy: Parametric studies, microstructure and mechanical properties
Tarun Bhardwaj et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tunable Hybrid Phononic Crystal Lens Using Thermo-Acoustic Polymers
Ezekiel L. Walker et al.
ACS OMEGA (2019)
Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)
Qingfeng Yang et al.
MATERIALS (2019)
Ultrasonic phased array inspection of a Wire plus Arc Additive Manufactured (WAAM) sample with intentionally embedded defects
Yashar Javadi et al.
ADDITIVE MANUFACTURING (2019)
An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing
G. Meneghetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Review of the recent advances and applications of LIBS-based imaging
L. Jolivet et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2019)
A comparison of traditional manufacturing vs additive manufacturing, the best method for the job
Tanisha Pereira et al.
DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH (2019)
In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing
Vasily N. Lednev et al.
ADDITIVE MANUFACTURING (2019)
Integrating digital image correlation in mechanical testing for the materials characterization of big area additive manufacturing feedstock
Kevin Schnittker et al.
ADDITIVE MANUFACTURING (2019)
The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6A1-4V alloy in 3.5% NaCl solution
Bintao Wu et al.
CORROSION SCIENCE (2018)
Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties
Asaf Levy et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing using WAAM with AA5183 wire
A. Horgar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Composition monitoring using plasma diagnostics during direct metal deposition (DMD) process
Joonghan Shin et al.
OPTICS AND LASER TECHNOLOGY (2018)
A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
Yingbin Hu et al.
CERAMICS INTERNATIONAL (2018)
Nondestructive ultrasonic evaluation of additively manufactured AlSi10Mg samples
T. Sol et al.
ADDITIVE MANUFACTURING (2018)
High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM)
Naor Elad Uzan et al.
ADDITIVE MANUFACTURING (2018)
Cold spray additive manufacturing and repair: Fundamentals and applications
Shuo Yin et al.
ADDITIVE MANUFACTURING (2018)
Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing
Ana Lopez et al.
ADDITIVE MANUFACTURING (2018)
Melt pool temperature and cooling rates in laser powder bed fusion
Paul A. Hooper
ADDITIVE MANUFACTURING (2018)
Direction and location dependency of selective laser melted AlSi10Mg specimens
Leonhard Hitzler et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of post weld heat treatment on the 6061 aluminum alloy produced by ultrasonic additive manufacturing
M. N. Gussev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
High Resolution Temperature Measurement of Liquid Stainless Steel Using Hyperspectral Imaging
Wim Devesse et al.
SENSORS (2017)
Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing
Ke An et al.
MATERIALS & DESIGN (2017)
Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Mohsen Attaran
BUSINESS HORIZONS (2017)
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges
Peeyush Nandwana et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Effects of Grain Size on Ultrasonic Attenuation in Type 316L Stainless Steel
Tao Wan et al.
MATERIALS (2017)
Formation characteristic, microstructure, and mechanical performances of aluminum-based components by friction stir additive manufacturing
Mao Yuqing et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing
Niyanth Sridharan et al.
ACTA MATERIALIA (2016)
Massive transformation in Ti-6Al-4V additively manufactured by selective electron beam melting
S. L. Lu et al.
ACTA MATERIALIA (2016)
Denudation of metal powder layers in laser powder bed fusion processes
Manyalibo J. Matthews et al.
ACTA MATERIALIA (2016)
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Amrita Basak et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Comparative environmental impacts of additive and subtractive manufacturing technologies
Henri Paris et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Study of Ti-6Al-4V alloy spectral emissivity characteristics during thermal oxidation process
Longfei Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
The unique abilities of cold spray deposition
V. Champagne et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process
Todd A. Book et al.
JOM (2016)
Additive Manufacturing via Surface Engineering
Narendra B. Dahotre et al.
JOM (2016)
Additive Manufacturing of High-Entropy Alloys by Laser Processing
V. Ocelik et al.
JOM (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Donghong Ding et al.
Materials (2016)
Direct Metal Additive Manufacturing Processes and Their Sustainable Applications for Green Technology: A Review
Dong-Gyu Ahn
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Selective Laser Melting of Metal Powder Of Steel 316l
V. G. Smelov et al.
VII INTERNATIONAL SCIENTIFIC PRACTICAL CONFERENCE INNOVATIVE TECHNOLOGIES IN ENGINEERING (2016)
Fundamentals of electron energy-loss spectroscopy
F. Hofer et al.
14TH EUROPEAN WORKSHOP ON MODERN DEVELOPMENTS AND APPLICATIONS IN MICROBEAM ANALYSIS (EMAS 2015 WORKSHOP) (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Xipeng Tan et al.
ACTA MATERIALIA (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
Johannes Stroessner et al.
ADVANCED ENGINEERING MATERIALS (2015)
Selective laser melting of aluminum die-cast alloy-Correlations between process parameters, solidification conditions, and resulting mechanical properties
D. Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2015)
Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
S. Palanivel et al.
MATERIALS & DESIGN (2015)
The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
Yan Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of the regimes of selective laser melting on the structure and physicomechanical properties of cobalt-base superalloys
T. V. Tarasova et al.
PHYSICS OF METALS AND METALLOGRAPHY (2015)
Characterization of Aging Behavior of AA6061 Aluminum Alloy Through Destructive and Ultrasonic Non-destructive Testing Techniques
Meysam Toozandehjani et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
3D printing in aerospace and its long-term sustainability
Sunil C. Joshi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting
Changhui Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced Via Electron Beam Freeform Fabrication
Wesley A. Tayon et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy
Lukas Loeber et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior
Bo Song et al.
MATERIALS & DESIGN (2014)
The Roadmap for Additive Manufacturing and Its Impact
David L. Bourell et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
Lore Thijs et al.
ACTA MATERIALIA (2013)
Laser-Induced Breakdown Spectroscopy
Francisco J. Fortes et al.
ANALYTICAL CHEMISTRY (2013)
Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera
Tatsuaki Furumoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Evolution of ultrasonic velocity and dynamic elastic moduli with shear strain in granular layers
Matthew W. Knuth et al.
GRANULAR MATTER (2013)
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
P. Edwards et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
Nikolas Hrabe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Fude Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading
Zhongyuan Qian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
The interpretation of XPS spectra: Insights into materials properties
Paul S. Bagus et al.
SURFACE SCIENCE REPORTS (2013)
Laser-Induced Breakdown Spectroscopy (LIBS), Part II: Review of Instrumental and Methodological Approaches to Material Analysis and Applications to Different Fields
David W. Hahn et al.
APPLIED SPECTROSCOPY (2012)
Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)
Bernd Baufeld
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Characterization of Material Properties of 2xxx Series Al-Alloys by Non Destructive Testing Techniques
Fawad Tariq et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2012)
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
J. Alcisto et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Mari Koike et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Selective laser melting of aluminium components
Eleftherios Louvis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition
Bernd Baufeld et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire
Erhard Brandl et al.
MATERIALS & DESIGN (2011)
The effect of specimen dimension on residual stress relaxation of carburized and quenched steels
Zhongyuan Qian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
L. E. Murr et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Fencheng Liu et al.
OPTICS AND LASER TECHNOLOGY (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Laser-Induced Breakdown Spectroscopy (LIBS), Part I: Review of Basic Diagnostics and Plasma-Particle Interactions: Still-Challenging Issues Within the Analytical Plasma Community
David W. Hahn et al.
APPLIED SPECTROSCOPY (2010)
Study of mechanical properties of AISI 316 stainless steel processed by selective laser melting, following different manufacturing strategies
Itziar Tolosa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Ultrasonic Attenuation Due to Grain Boundary Scattering in Pure Niobium
Fei Zeng et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2010)
Life prediction of metals undergoing fatigue load based on temperature evolution
M. Amiri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders
Luca Facchini et al.
RAPID PROTOTYPING JOURNAL (2010)
Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V
L. E. Murr et al.
MATERIALS CHARACTERIZATION (2009)
Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy
Zhang Shuangyin et al.
RARE METALS (2009)
High Frequency Ultrasonic Imaging
K. Kirk Shung
JOURNAL OF MEDICAL ULTRASOUND (2009)
Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials
Toru Yamashita et al.
APPLIED SURFACE SCIENCE (2008)
Correlation of Yield Strength and Tensile Strength with Hardness for Steels
E. J. Pavlina et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
SEM, EDS, EPMA-WDS and EBSD characterization of carbides in HP type heat resistant alloys
J. Laigo et al.
MATERIALS CHARACTERIZATION (2008)
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
G. P. Dinda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Two-dimensional and three-dimensional analyses of sigma precipitates and porosity in a superaustenitic stainless steel
R. W. Fonda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Efficient cooling with tool inserts manufactured by electron beam melting
L-E. Rannar et al.
RAPID PROTOTYPING JOURNAL (2007)
Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites
Sedat Ozden et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Correlation of nanoindentation measurements of nickel made using geometrically different indenter tips
RA Mirshams et al.
ACTA MATERIALIA (2006)
Effect of forced melt flow on microstructure evolution in AlSi7Mg0.6 alloy during directional solidification
G Zimmermann et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
The mechanical and microstructural characteristics of laser-deposited IN718
PL Blackwell
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD)
FJ Humphreys
SCRIPTA MATERIALIA (2004)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
WC Oliver et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Analytical study by SEM/EDX and metallographic techniques of materials used in the iron production process during the iberian period
JVG Adelantado et al.
TALANTA (2003)
Review of instrumented indentation
MR VanLandingham
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2003)
Friction stir processing: a novel technique for fabrication of surface composite
RS Mishra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Quantitative micro-analysis by laser-induced breakdown spectroscopy: a review of the experimental approaches
E Tognoni et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2002)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Ultrasonic velocity measurements for characterizing the annealing behaviour of cold worked austenitic stainless steel
P Palanichamy et al.
NDT & E INTERNATIONAL (2000)