相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Raman spectroscopy for carbon nanotube applications
A. Jorio et al.
JOURNAL OF APPLIED PHYSICS (2021)
Effect of thermal treatment of SiC nanowhiskers on rheological, hydration, mechanical and microstructure properties of Portland cement pastes
Nagilla Huerb de Azevedo et al.
CEMENT & CONCRETE COMPOSITES (2021)
Effect of the combined use of carbon nanotubes (CNT) and metakaolin on the properties of cementitious matrices
Jose da Silva Andrade Neto et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effects of carbon nanotubes on the early-age hydration kinetics of Portland cement using isothermal calorimetry
Alastair J. N. MacLeod et al.
CEMENT & CONCRETE COMPOSITES (2021)
The Importance of Structural Factors for the Electrochemical Performance of Graphene/Carbon Nanotube/Melamine Powders towards the Catalytic Activity of Oxygen Reduction Reaction
Piotr Kamedulski et al.
MATERIALS (2021)
Rheology, Hydration, and Microstructure of Portland Cement Pastes Produced with Ground Acai Fibers
Afonso Azevedo et al.
APPLIED SCIENCES-BASEL (2021)
Is the R index accurate to assess the preferred orientation of portlandite in cement pastes?
Paulo R. de Matos et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Utilization of ceramic tile demolition waste as supplementary cementitious material: An early-age investigation
Paulo R. de Matos et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Combined Functionalization of Carbon Nanotubes (CNT) Fibers with H2SO4/HNO3 and Ca(OH)2 for Addition in Cementitious Matrix
Eduardo Batiston et al.
FIBERS (2021)
Investigating the effect of carbon nanotube on early age hydration of cementitious composites with isothermal calorimetry and Fourier transform infrared spectroscopy
Zhen Li et al.
CEMENT & CONCRETE COMPOSITES (2020)
A systematic investigation of dispersion concentration and particle size distribution of multi-wall carbon nanotubes in aqueous solutions of various dispersants
Wei Dai et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
The effect of compatibility and dimensionality of carbon nanofillers on cement composites
Amr Alatawna et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Properties improvement of multiwall carbon nanotubes-reinforced cement-based composites
Baomin Wang et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)
A. R. G. Azevedo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of Sonicated Deionized Water on The Early Age Behavior of Portland Cement-Based Concrete and Paste
Lateef N. Assi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Durability Characterisation of Portland Cement-Carbon Nanotube Nanocomposites
Alastair J. N. MacLeod et al.
MATERIALS (2020)
Effects of mixing sequences of nanosilica on the hydration and hardening properties of cement-based materials
Pengkun Hou et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: A systematic literature review
Laura Silvestro et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of multi-walled carbon nanotubes on the hydration products of ordinary Portland cement paste
Jiaxin Chen et al.
CEMENT AND CONCRETE RESEARCH (2020)
Dispersion and reinforcement efficiency of carbon nanotubes in cementitious composites
Hawreen Ahmed et al.
MAGAZINE OF CONCRETE RESEARCH (2019)
Improved fracture toughness and ductility of PLA composites by incorporating a small amount of surface-modified helical carbon nanotubes
Ying Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Estimation of Mechanical Performance, Thermal Stability and Flame Retardancy of High-Impact Polystyrene/Surface-Modified APP/Carboxylic-Functionalized MWCNTs Nanocomposites
Li Ding et al.
POLYMERS (2019)
Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
Oscar A. Mendoza Reales et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Selection of dispersants for stabilization of unfunctionalized carbon nanotubes in high pH aqueous suspensions: Application to cementitious matrices
J. A. Bogas et al.
APPLIED SURFACE SCIENCE (2019)
Mechanical and microstructural properties of cement pastes containing carbon nanotubes and carbon nanotube-silica core-shell structures, exposed to elevated temperature
Pawel Sikora et al.
CEMENT & CONCRETE COMPOSITES (2019)
Effect of multi-walled carbon nanotubes (MWCNTs) on the strength development of cementitious materials
Ali Naqi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Efficiency of ultrasound for degradation of an anionic surfactant from water: Surfactant determination using methylene blue active substances method
Mohammad Hadi Dehghani et al.
METHODSX (2019)
Preparation of hydroxyl and (3-aminopropyl)triethoxysilane functionalized multiwall carbon nanotubes for use as conductive fillers in the polyurethane composite
Shasha Li et al.
POLYMER COMPOSITES (2018)
Influence of MWCNT/surfactant dispersions on the rheology of Portland cement pastes
Oscar A. Mendoza Reales et al.
CEMENT AND CONCRETE RESEARCH (2018)
Chemical and mechanical characterization of ternary cement pastes containing metakaolin and nanosilica
Daniel da Silva Andrade et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of carbon fibers grafted with carbon nanotubes on mechanical properties of cement-based composites
Hongzhi Cui et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Rheological properties of cementitious composites with nano/fiber fillers
Shan Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements-results of a round robin test
Ruben Snellings et al.
MATERIALS AND STRUCTURES (2018)
What is the proper way to apply the multiple comparison test?
Sangseok Lee et al.
KOREAN JOURNAL OF ANESTHESIOLOGY (2018)
Characterizing dispersion and long term stability of concentrated carbon nanotube aqueous suspensions for fabricating ductile cementitious composites
Shama Parveen et al.
POWDER TECHNOLOGY (2017)
Effects of Various Surfactants on the Dispersion of MWCNTs-OH in Aqueous Solution
Hongzhi Cui et al.
NANOMATERIALS (2017)
Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes
Anwar Khitab et al.
FRATTURA ED INTEGRITA STRUTTURALE (2017)
A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites
Oscar Aurelio Mendoza Reales et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Surface modification of carbon nanotubes using 3-aminopropyltriethoxysilane to improve mechanical properties of nanocomposite based polymer matrix: Experimental and Density functional theory study
A. Hamed Mashhadzadeh et al.
APPLIED SURFACE SCIENCE (2017)
Effect of CNT and CNF loading and count on the corrosion resistance, conductivity and mechanical properties of nanomodified OPC mortars
Maria S. Konsta-Gdoutos et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evaluation of microstructure and mechanical performance of CNT-reinforced cementitious composites at elevated temperatures
L. W. Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Acid-treated carbon nanotubes and their effects on mortar strength
M. Elkashef et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2016)
Effect of a commercial dispersion of multi walled carbon nanotubes on the hydration of an oil well cementing paste
Ocar Aurelio Mendoza Reales et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2016)
The critical role of nanotube shape in cement composites
Roey Nadiv et al.
CEMENT & CONCRETE COMPOSITES (2016)
Dispersion of multi-walled carbon nanotubes and its effects on the properties of cement composites
Forood Torabian Isfahani et al.
CEMENT & CONCRETE COMPOSITES (2016)
On the efficiency of UV-vis spectroscopy in assessing the dispersion quality in sonicated aqueous suspensions of carbon nanotubes
P. Alafogianni et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)
Carbon nanotube reinforced cementitious composites: An overview
K. M. Liew et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites
Mohamed O. Mohsen et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Carbon Nanotubes in Cementitious Composites: Dispersion, Implementation, and Influence on Mechanical Characteristics
Tomas Jarolim et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes
Bo Zou et al.
CARBON (2015)
Advances in understanding hydration of Portland cement
Karen L. Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2015)
Effect of Some Parameters on the Compressive Strength of MWCNT-Cement Composites
Hyukjin Choi et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)
The influence of the chemical structure of polycarboxylic superplasticizers on their effectiveness in cement pastes
Elzbieta Janowska-Renkas
7TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2015) (2015)
Nano reinforced cement and concrete composites and new perspective from graphene oxide
Samuel Chuah et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Understanding the Filler Effect on the Nucleation and Growth of C-S-H
E. Berodier et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Mechanical Properties and Durability of CNT Cement Composites
Maria del Carmen Camacho et al.
MATERIALS (2014)
Influence of silane concentration on the silanization of multiwall carbon nanotubes
F. Aviles et al.
CARBON (2013)
Effects of colloidal nanosilica on rheological and mechanical properties of fly ash-cement mortar
Peng-kun Hou et al.
CEMENT & CONCRETE COMPOSITES (2013)
Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications
Oscar Mendoza et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Silanization and silica enrichment of multiwalled carbon nanotubes: Synergistic effects on the thermal-mechanical properties of epoxy nanocomposites
M. Lavorgna et al.
EUROPEAN POLYMER JOURNAL (2013)
Carbon nanotube length reduction techniques, and characterisation of oxidation state using quasi-elastic light scattering
D. F. Chowdhury et al.
CARBON (2011)
Mechanisms of cement hydration
Jeffrey W. Bullard et al.
CEMENT AND CONCRETE RESEARCH (2011)
Silane modification of carbon nanotubes and its effects on the material properties of carbon/CNT/epoxy three-phase composites
Ji-Hoon Lee et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites
Carlos Velasco-Santos et al.
JOURNAL OF NANOMATERIALS (2011)
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Peng-Cheng Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Influence of limestone on the hydration of Portland cements
Barbara Lothenbach et al.
CEMENT AND CONCRETE RESEARCH (2008)
Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites
A. M. Shanmugharaj et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Determination of the concentration of single-walled carbon nanotubes in aqueous dispersions using UV-visible absorption spectroscopy
S. Attal et al.
ANALYTICAL CHEMISTRY (2006)
Covalent surface chemistry of single-walled carbon nanotubes
S Banerjee et al.
ADVANCED MATERIALS (2005)
Production of aqueous colloidal dispersions of carbon nanotubes
LQ Jiang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)
分享论文
