相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Compressive behavior and microstructural analysis of low and high volume fly ash concrete containing recycled concrete aggregate
Yimeng Wei et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2022)
Foamed concrete containing fly ash: Properties and application to backfilling
Yong-gui Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
Grzegorz Ludwik Golewski et al.
MATERIALS (2021)
The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
Grzegorz Ludwik Golewski
ENERGIES (2021)
Early Hydration Heat of Calcium Sulfoaluminate Cement with Influences of Supplementary Cementitious Materials and Water to Binder Ratio
Jun Zhang et al.
MATERIALS (2021)
Granite Powder vs. Fly Ash for the Sustainable Production of Air-Cured Cementitious Mortars
Adrian Chajec
MATERIALS (2021)
Properties of multi-layer renders with fly ash and boiler slag admixtures for salt-laden masonry
Danuta Barnat-Hunek et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
On the effect of internal friction on torsional and axial cyclic loading
M. Mehdizadeh et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Influence of magnesium slag as a mineral admixture on the performance of concrete
Guangxiang Ji et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length - Using the crack tip tracking (CTT) method - In the fracture toughness examinations under Mode II, through digital image correlation
Grzegorz Ludwik Golewski
CONSTRUCTION AND BUILDING MATERIALS (2021)
Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method
Grzegorz Ludwik Golewski
MEASUREMENT (2021)
Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials
Zahra Khaji et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
On the special construction and materials conditions reducing the negative impact of vibrations on concrete structures
Grzegorz Ludwik Golewski
MATERIALS TODAY-PROCEEDINGS (2021)
Enhancement of early-age strength of the high content fly ash blended cement paste by sodium sulfate and C-S-H seeds towards a greener binder
Fubing Zou et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Microstructure development and autogenous shrinkage of mortars with C-S-H seeding and internal curing
Mateusz Wyrzykowski et al.
CEMENT AND CONCRETE RESEARCH (2020)
Development and application of a highly durable precast prestressed concrete slab deck using fly ash concrete
Tuan Minh Ha et al.
STRUCTURE AND INFRASTRUCTURE ENGINEERING (2020)
Effect of accelerated curing regimes on high volume Fly ash mixtures in precast manufacturing plants
Hayder H. Alghazali et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of Sodium Sulfate and C-S-H Seeds on the Reaction of Fly Ash with Different Amorphous Alumina Contents
Fubing Zou et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition
Grzegorz Ludwik Golewski
ENERGIES (2020)
Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste
Zbigniew Suchorab et al.
MATERIALS (2020)
Evaluation of Cracking Patterns in Cement Composites-From Basics to Advances: A Review
Maciej Szelag
MATERIALS (2020)
The acceleration mechanism of nano-C-S-H particles on OPC hydration
Fang Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of Fly Ash Additive on the Properties of Concrete with Slag Cement
Anna Szczesniak et al.
MATERIALS (2020)
Properties of fresh and hardened fly ash/slag based geopolymer concrete: A review
Peng Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Nanoparticle-reinforced building materials with applications in civil engineering
Peng Zhang et al.
ADVANCES IN MECHANICAL ENGINEERING (2020)
Impact of modified kenaf fibers on shrinkage and cracking of cement pastes
Aofei Guo et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric C-S-H Seeds
Bartosz Szostak et al.
ENERGIES (2020)
Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
Grzegorz Ludwik Golewski
MATERIALS (2020)
Utilization of fly ash cenosphere to study mechanical and thermal properties of lightweight concrete
Salmia Beddu et al.
AIMS MATERIALS SCIENCE (2020)
A stoichiometric approach to find optimum amount of fly ash needed in cement concrete
Muhammad Raheel et al.
SN APPLIED SCIENCES (2020)
Preparation of calcium silicate hydrate seeds by means of mechanochemical method and its effect on the early hydration of cement
Boyuan Wan et al.
ADVANCES IN MECHANICAL ENGINEERING (2019)
A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2019)
COMPARATIVE STUDY AND EMPIRICAL MODELLING OF PULVERIZED COCONUT SHELL, PERIWINKLE SHELL AND PALM KERNEL SHELL AS A POZZOLANS IN CONCRETE
Efe Ewaen Ikponmwosa et al.
ACTA POLYTECHNICA (2019)
The effect of synthesis conditions on the efficiency of C-S-H seeds to accelerate cement hydration
G. Land et al.
CEMENT & CONCRETE COMPOSITES (2018)
Nucleation seeding with calcium silicate hydrate - A review
Elisabeth John et al.
CEMENT AND CONCRETE RESEARCH (2018)
A failure analysis of concrete composites incorporating fly ash during torsional loading
T. Sadowski et al.
COMPOSITE STRUCTURES (2018)
Effect of curing time on the fracture toughness of fly ash concrete composites
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2018)
Poisson's Ratio of Closed-Cell Aluminium Foams
Jaroslav Kovacik et al.
MATERIALS (2018)
Restrained Shrinkage Cracking of Fiber-Reinforced High-Strength Concrete
Ashkan Saradar et al.
FIBERS (2018)
EFFECT OF FLY ASH ADDITION ON THE FRACTURE TOUGHNESS OF PLAIN CONCRETE AT THIRD MODEL OF FRACTURE
Grzegorz Ludwik Golewski
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2017)
Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading
Grzegorz Ludwik Golewski
STRUCTURAL ENGINEERING AND MECHANICS (2017)
Early age shrinkage and heat of hydration of cement-fly ash-slag ternary blends
Xiang Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete
Alireza Joshaghani
CONSTRUCTION AND BUILDING MATERIALS (2017)
Numerical simulation of tensile failure of concrete using Particle Flow Code (PFC)
Hadi Haeri et al.
COMPUTERS AND CONCRETE (2016)
Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test
Xinhua Cai et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Mechanical and time-dependent properties of high-volume fly ash concrete for structural use
Jelena Dragas et al.
MAGAZINE OF CONCRETE RESEARCH (2016)
Effect of Slag Cement on Drying Shrinkage of Concrete
Jiqiu Yuan et al.
ACI MATERIALS JOURNAL (2015)
Use of nanocrystal seeding chemical admixture in improving Portland cement strength development: application for precast concrete industry
K. Owens et al.
ADVANCES IN APPLIED CERAMICS (2014)
The performance of Fly ash and Metakaolin concrete at elevated temperatures
Abid Nadeem et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Experimental investigation and numerical modeling fracture processes under Mode II in concrete composites containing fly-ash additive at early age
Grzegorz L. Golewski et al.
ADVANCED MATERIALS AND STRUCTURES IV (2012)
A REVIEW OF THE POSSIBLE APPLICATIONS OF NANOTECHNOLOGY IN REFRACTORY CONCRETE
Valentin Antonovic et al.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2010)
Influence of Nucleation Seeding on the Hydration Mechanisms of Tricalcium Silicate and Cement
Jeffrey J. Thomas et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar
P. Chindaprasirt et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
分享论文
