相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
Senol Sirin et al.
TRIBOLOGY INTERNATIONAL (2021)
Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies
Xiaoliang Liang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Cutting force model of longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4V based on tool flank wear
Guofu Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy
Navneet Khanna et al.
TRIBOLOGY INTERNATIONAL (2020)
Surface integrity, fatigue performance and dry sliding wear behaviour of Si3N4-TiN after wire-electro discharge machining
V. P. Srinivasan et al.
CERAMICS INTERNATIONAL (2020)
Influence of ultrasonic peening cutting on surface integrity and fatigue behavior of Ti-6Al-4V specimens
Li Xun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Chatter stability and precision during high-speed ultrasonic vibration cutting of a thin-walled titanium cylinder
Zhenlong Peng et al.
CHINESE JOURNAL OF AERONAUTICS (2020)
Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A review on recent development of minimum quantity lubrication for sustainable machining
N. N. Nor Hamran et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effects of high-pressure coolant on cutting performance of high-speed ultrasonic vibration cutting titanium alloy
Zhenghui Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Geometrical texture and surface integrity in helical milling and ultrasonic vibration helical milling of Ti-6Al-4V alloy
Guang Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Investigation on machining characteristics of TC4 alloy by simultaneous application of ultrasonic vibration assisted milling (UVAM) and economical-environmental MQL technology
Chenbing Ni et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effects of ultrasonic nanocrystal surface modification on the surface integrity, microstructure, and wear resistance of 300M martensitic ultra-high strength steel
Weidong Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL
Cagri Vakkas Yildirim
TRIBOLOGY INTERNATIONAL (2020)
Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy
Rupinder Singh et al.
TRIBOLOGY INTERNATIONAL (2020)
Effect of 3D elliptical ultrasonic assisted boring on surface integrity
Mohammad Lotfi et al.
MEASUREMENT (2020)
Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
Turgay Kivak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti-6Al-4V
Mingliang Zhang et al.
MATERIALS & DESIGN (2020)
Review of ultrasonic vibration-assisted machining in advanced materials
Zhichao Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
Influences of machining parameters on tool performance when high-speed ultrasonic vibration cutting titanium alloys
Xiangyu Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Thermo-mechanical coupling effect on surface residual stress during ultrasonic vibration-assisted forming grinding gear
Bo Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti-6Al-4V: FEM and experimental examination
Mohammad Lotfi et al.
TRIBOLOGY INTERNATIONAL (2020)
Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO2 with MQL conditions
Qinglong An et al.
TRIBOLOGY INTERNATIONAL (2020)
State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review
Xiaoliang Liang et al.
MEASUREMENT (2019)
Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms
Gurraj Singh et al.
MATERIALS (2019)
The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
Cagri Vakkas Yildirim et al.
TRIBOLOGY INTERNATIONAL (2019)
The effects of thermo-mechanical load on the vibrational characteristics of ultrasonic vibration system
Bo Zhao et al.
ULTRASONICS (2019)
Effect of combined shot peening and ultrasonic nanocrystal surface modification processes on the fatigue performance of AISI 304
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Study of Phase Shift Control in High-Speed Ultrasonic Vibration Cutting
Xinggang Jiang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)
Development of a tool-workpiece thermocouple system for comparative study of the cutting temperature when high-speed ultrasonic vibration cutting Ti-6Al-4V alloys with and without cutting fluids
Xiangyu Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
An analytical transient cutting force model of high-speed ultrasonic vibration cutting
Xiangyu Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Influence of work-hardening on fatigue crack growth, effective threshold and crack opening behavior in the nickel-based superalloy Inconel 718
Alexander Klumpp et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V
Xiaoliang Liang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy
Mozammel Mia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools
Xiaoliang Liang et al.
TRIBOLOGY INTERNATIONAL (2018)
Study on the separation effect of high-speed ultrasonic vibration cutting
Xiangyu Zhang et al.
ULTRASONICS (2018)
Cutting temperature and resulting influence on machining performance in rotary ultrasonic elliptical machining of thick CFRP
Daxi Geng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Feasibility study of high-speed ultrasonic vibration cutting titanium alloy
He Sui et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Cooling performance of micro-texture at the tool flank face under high pressure jet coolant assistance
Zhenglong Fang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Tool wear characteristics in machining of nickel-based superalloys
Dahu Zhu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress
J. Kwong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V
J. Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
R. S. Pawade et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Review of vibration-assisted machining
D. E. Brehl et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy
Y. S. Liao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V
CH Che-Haron et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
The effect of machined topography and integrity on fatigue life
D Novovic et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)