相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Spray coating of polysulfone/poly(ethylene glycol) block polymer on macroporous substrates followed by selective swelling for composite ultrafiltration membranes
Dongwei Ma et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)
Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications
Muzi Li et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance
Mosab Kaseem et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Antibacterial coatings based on polycaprolactone and polyurethane with prolonged release of ciprofloxacin
Qin Xu et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Poly(lactic-co-glycolic acid)-based composite bone-substitute materials
Duoyi Zhao et al.
BIOACTIVE MATERIALS (2021)
Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
Humayun Kabir et al.
BIOACTIVE MATERIALS (2021)
Smart biomaterials-A proposed definition and overview of the field
Shukufe Amukarimi et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2021)
Drug Delivery Systems Based on Titania Nanotubes and Active Agents for Enhanced Osseointegration of Bone Implants
Raluca Ion et al.
CURRENT MEDICINAL CHEMISTRY (2020)
Antibacterial properties of silver nanoparticles grown in situ and anchored to titanium dioxide nanotubes on titanium implant against Staphylococcus aureus
Urvashi F. Gunputh et al.
NANOTOXICOLOGY (2020)
Plasma electrolytic oxidation of zinc alloy in a phosphate-aluminate electrolyte
C. Blawert et al.
APPLIED SURFACE SCIENCE (2020)
Enhanced corrosion resistance and biocompatibility of polydopamine/dicalcium phosphate dihydrate/collagen composite coating on magnesium alloy for orthopedic applications
Yunting Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Biofunctionalization of selective laser melted porous titanium using silver and zinc nanoparticles to prevent infections by antibiotic-resistant bacteria
I. A. J. van Hengel et al.
ACTA BIOMATERIALIA (2020)
Functionalization of a clustered TiO2 nanotubular surface with platelet derived growth factor-BB covalent modification enhances osteogenic differentiation of bone marrow mesenchymal stem cells
Qianli Ma et al.
BIOMATERIALS (2020)
Synergistic effects of lanthanum and strontium to enhance the osteogenic activity of TiO2 nanotube biological interface
Xuejiao Zhang et al.
CERAMICS INTERNATIONAL (2020)
Improved corrosion performance of biodegradable magnesium in simulated inflammatory condition via drug-loaded plasma electrolytic oxidation coatings
Aidin Bordbar-Khiabani et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Effect of laser power on formability, microstructure and mechanical properties of selective laser melted Mg-Al-Zn alloy
Xingcheng Wang et al.
RAPID PROTOTYPING JOURNAL (2020)
Enhancing the biodegradability and surface protective performance of AZ31 Mg alloy using polypyrrole/gelatin composite coatings with anodized Mg surface
V Jothi et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Modifications of Dental Implant Surfaces at the Micro- and Nano-Level for Enhanced Osseointegration
In-Sung Luke Yeo
MATERIALS (2020)
Mesoporous Silica Nanoparticles for the Treatment of Complex Bone Diseases: Bone Cancer, Bone Infection and Osteoporosis
Miguel Gisbert-Garzaran et al.
PHARMACEUTICS (2020)
Development of Heat Treatments for Selective Laser Melting Ti6Al4V Alloy: Effect on Microstructure, Mechanical Properties, and Corrosion Resistance
Silvia Cecchel et al.
ADVANCED ENGINEERING MATERIALS (2020)
On the enhanced antibacterial activity of plasma electrolytic oxidation (PEO) coatings that incorporate particles: A review
Arash Fattah-alhosseini et al.
CERAMICS INTERNATIONAL (2020)
Degradation, Bone Regeneration and Tissue Response of an Innovative Volume Stable Magnesium-Supported GBR/GTR Barrier Membrane
Mike Barbeck et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
Zn-Incorporated TiO2 Nanotube Surface Improves Osteogenesis Ability Through Influencing Immunomodulatory Function of Macrophages
Bo Chen et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)
Effect of solution and aging treatments on corrosion performance of laser solid formed Ti-6Al-4V alloy in a 3.5 wt. % NaCl solution
Xiawei Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Polydopamine modified TiO2 nanotube arrays as a local drug delivery system for ibuprofen
Lifen Li et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Bioactivity Behavior Evaluation of PCL-Chitosan-Nanobaghdadite Coating on AZ91 Magnesium Alloy in Simulated Body Fluid
Farzad Soleymani et al.
COATINGS (2020)
PLA deposition on surface treated magnesium alloy: Adhesion, toughness and corrosion behaviour
M. Munoz et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Role of TiO2Nanotubes on the Surface of Implants in Osseointegration in Animal Models: A Systematic Review and Meta-Analysis
Feifan Wang et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2020)
Construction of N-halamine biocompatible multilayers onto BMP2 loaded titanium nanotubes for bacterial infection inhibition and osteogenic effect improvement
Yang Jiao et al.
MATERIALS LETTERS (2020)
Enhanced Mechanical Properties of Surface Treated AZ31 Reinforced Polymer Composites
Muhammad Shoaib Butt et al.
CRYSTALS (2020)
Icariin/Aspirin Composite Coating on TiO2 Nanotubes Surface Induce Immunomodulatory Effect of Macrophage and Improve Osteoblast Activity
Aobo Ma et al.
COATINGS (2020)
The Effect of Ti-6Al-4V Alloy Surface Structure on the Adhesion and Morphology of Unidirectional Freeze-Coated Gelatin
Snehashis Pal et al.
COATINGS (2020)
Silk Fibroin-Based Hybrid Nanostructured Coatings for Titanium Implantable Surfaces Modification
Simona Popescu et al.
COATINGS (2020)
Hybrid Injectable Sol-Gel Systems Based on Thermo-Sensitive Polyurethane Hydrogels Carrying pH-Sensitive Mesoporous Silica Nanoparticles for the Controlled and Triggered Release of Therapeutic Agents
Monica Boffito et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution
N. E. Putra et al.
ACTA BIOMATERIALIA (2020)
As-Built EBM and DMLS Ti-6Al-4V Parts: Topography-Corrosion Resistance Relationship in a Simulated Body Fluid
Annalisa Acquesta et al.
METALS (2020)
A Review of SLMed Magnesium Alloys: Processing, Properties, Alloying Elements and Postprocessing
Shuai Liu et al.
METALS (2020)
Chitosan Coating of TiO2 Nanotube Arrays for Improved Metformin Release and Osteoblast Differentiation
Amir Hashemi et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)
Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development
Hooyar Attar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Bioactive Surfaces vs. Conventional Surfaces in Titanium Dental Implants: A Comparative Systematic Review
Nansi Lopez-Valverde et al.
JOURNAL OF CLINICAL MEDICINE (2020)
The influence of process parameters on corrosion behavior of Ti6Al4V alloy processed by selective laser melting
Chenghui Qian et al.
JOURNAL OF LASER APPLICATIONS (2020)
Additively manufactured biodegradable porous metals
Yageng Li et al.
ACTA BIOMATERIALIA (2020)
Dual delivery of platelet-derived growth factor and bone morphogenetic factor-6 on titanium surface to enhance the early period of implant osseointegration
H. Gencay Keceli et al.
JOURNAL OF PERIODONTAL RESEARCH (2020)
Biomimetic titanium implant coated with extracellular matrix enhances and accelerates osteogenesis
Yu Wu et al.
NANOMEDICINE (2020)
Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy
Duyao Zhang et al.
SCRIPTA MATERIALIA (2020)
Functionalization of pure titanium MAO coatings by surface modifications for biomedical applications
Shu-Chuan Liao et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method
Jan Suchy et al.
MATERIALS (2020)
Magnesium-doped Nanostructured Titanium Surface Modulates Macrophage-mediated Inflammatory Response for Ameliorative Osseointegration
Xinrui Qiao et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)
Fabrication of bioactive corrosion-resistant polyaniline/TiO2 nanotubes nanocomposite and their application in orthopedics
Agilan Perumal et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Ag nanoparticles incorporated tannic acid/nanoapatite composite coating on Ti implant surfaces for enhancement of antibacterial and antioxidant properties
Huang Di et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Cobalt Chromium Molybdenum Surface Modifications Alter the Osteogenic Differentiation Potential of Human Mesenchymal Stem Cells
Birgit Lohberger et al.
MATERIALS (2020)
Physico-chemical and biological evaluation of doxycycline loaded into hybrid oxide-polymer layer on Ti-Mo alloy
Alicja Kazek-Kesik et al.
BIOACTIVE MATERIALS (2020)
Antibacterial and cytocompatible coatings based on poly(adipic anhydride) for a Ti alloy surface
Katarzyna Lesniak-Ziolkowska et al.
BIOACTIVE MATERIALS (2020)
Hydroxyapatite/tannic acid composite coating formation based on Ti modified by TiO2 nanotubes
Lin Qiaoxia et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2020)
Influence of Surface Finishing on Corrosion Behaviour of 3D Printed TiAlV Alloy
Jaroslav Fojt et al.
METALS (2020)
Incorporation of Sr 2+and Ag nanoparticles into TiO 2 nanotubes to synergistically enhance osteogenic and antibacterial activities for bone repair
Changjiang Pan et al.
MATERIALS & DESIGN (2020)
An asymmetric surface coating strategy for improved corrosion resistance and vascular compatibility of magnesium alloy stents
Min-Ho Kang et al.
MATERIALS & DESIGN (2020)
Growth factors enhanced angiogenesis and osteogenesis on polydopamine coated titanium surface for bone regeneration
Jiuping Wu et al.
MATERIALS & DESIGN (2020)
Powder based additive manufacturing for biomedical application of titanium and its alloys: a review
Tae-Sik Jang et al.
BIOMEDICAL ENGINEERING LETTERS (2020)
Silk Fibroin as a Coating Polymer for Sirolimus-Eluting Magnesium Alloy Stents
Wei Xu et al.
ACS APPLIED BIO MATERIALS (2020)
Influence of Heat Treatment Parameters on the Corrosion Resistance of Additively Manufactured Ti-6Al-4V Alloy
Dong-Il Seo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Additive manufacturing of magnesium alloys
Rakeshkumar Karunakaran et al.
BIOACTIVE MATERIALS (2020)
Corrosion phenomena of PEO-treated films formed in solution containing Mn, Mg, and Si ions
Sang-Gyu lim et al.
APPLIED SURFACE SCIENCE (2019)
Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect
Yuxiao Lai et al.
BIOMATERIALS (2019)
On osseointegration in relation to implant surfaces
Tomas Albrektsson et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2019)
In vitro degradation and antibacterial property of a copper-containing micro-arc oxidation coating on Mg-2Zn-1Gd-0.5Zr alloy
Junxiu Chen et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
Advances in mesoporous silica nanoparticles for targeted stimuli-responsive drug delivery: an update
Rafael R. Castillo et al.
EXPERT OPINION ON DRUG DELIVERY (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
Alexander Kopp et al.
ACTA BIOMATERIALIA (2019)
Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysis
Florian Baer et al.
ACTA BIOMATERIALIA (2019)
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Yu Qin et al.
ACTA BIOMATERIALIA (2019)
Effects of Zn and Si ions on the corrosion behaviors of PEO-treated Ti-6Al-4V alloy
In-Jo Hwang et al.
APPLIED SURFACE SCIENCE (2019)
Morphology changes and bone formation on PEO-treated Ti-6Al-4V alloy in electrolyte containing Ca, P, Sr, and Si ions
Ji-Min Yu et al.
APPLIED SURFACE SCIENCE (2019)
Corrosion behaviour of laser powder bed fused bulk pure magnesium in hank's solution
Xiaomiao Niu et al.
CORROSION SCIENCE (2019)
In vitro degradation behavior and cytocompatibility of ZK30/bioactive glass composites fabricated by selective laser melting for biomedical applications
Yong Yin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
Ming-Shi Song et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Bioactive multi-elemental PEO-coatings on titanium for dental implant applications
A. Santos-Coquillat et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Deposition of catechol-functionalized chitosan and silver nanoparticles on biomedical titanium surfaces for antibacterial application
Yan Fang Cheng et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Selective laser melting of Mg-Zn binary alloys: Effects of Zn content on densification behavior, microstructure, and mechanical property
Kaiwen Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
SiO2 loading into polydopamine-functionalized TiO2 nanotubes for biomedical applications
Haixia Qiao et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Recent advances in cell sheet technology for bone and cartilage regeneration: from preparation to application
Yuezhi Lu et al.
INTERNATIONAL JOURNAL OF ORAL SCIENCE (2019)
Additive manufacturing of magnesium-zinc-zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printing
Mojtaba Salehi et al.
MATERIALS & DESIGN (2019)
Silk fibroin film-coated MgZnCa alloy with enhanced in vitro and in vivo performance prepared using surface activation
Chenxi Wang et al.
ACTA BIOMATERIALIA (2019)
Controlling magnesium corrosion and degradation-regulating mineralization using matrix GLA protein
Dandan Hong et al.
ACTA BIOMATERIALIA (2019)
Drug loaded electrospun polymer/ceramic composite nanofibrous coatings on titanium for implant related infections
A. Sandeep Kranthi Kiran et al.
CERAMICS INTERNATIONAL (2019)
Corrosion resistance and antibacterial properties of hydroxyapatite coating induced by gentamicin-loaded polymeric multilayers on magnesium alloys
Xiao-Jing Ji et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
Controlling Cell Behavior through the Design of Biomaterial Surfaces: A Focus on Surface Modification Techniques
Hamed Amani et al.
ADVANCED MATERIALS INTERFACES (2019)
Chitosan in Surface Modification for Bone Tissue Engineering Applications
Balakrishnan Abinaya et al.
BIOTECHNOLOGY JOURNAL (2019)
Hierarchical Functionalized Polymeric-Ceramic Coatings on Mg-Ca Alloys for Biodegradable Implant Applications
Ana Santos-Coquillat et al.
MACROMOLECULAR BIOSCIENCE (2019)
The plasma electrolytic oxidation (PEO) coatings to enhance in-vitro corrosion resistance of Ti-29Nb-13Ta-4.6Zr alloys: The combined effect of duty cycle and the deposition frequency
Fatma Songur et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Antibiotics drug release controlling and osteoblast adhesion from Titania nanotubes arrays using silk fibroin coating
Mehdi Fathi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Obtaining and characterization of PEO layers prepared on CP-Ti in sodium dihydrogen phosphate dihydrate acidic electrolyte solution
V Malinovschi et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials
Xiang-Yu Zhang et al.
ACTA BIOMATERIALIA (2019)
Corrosion and Corrosion Fatigue Properties of Additively Manufactured Magnesium Alloy WE43 in Comparison to Titanium Alloy Ti-6Al-4V in Physiological Environment
Nils Wegner et al.
MATERIALS (2019)
Hemocompatibility and adhesion of heparin/dopamine and heparin/collagen self-assembly multilayers coated on a titanium substrate
Wen-Jin Cheng et al.
APPLIED SURFACE SCIENCE (2019)
On the microstructure and corrosion behaviors of selective laser melted CP-Ti and Ti-6Al-4V alloy in Hank?s artificial body fluid
Yi Xiao et al.
MATERIALS RESEARCH EXPRESS (2019)
Processing of nanotubes on NiTi-shape memory alloys and their modification with photografted anti-adhesive polymer brushes. Towards smart implant surfaces
Martha Es-Souni et al.
MATERIALS & DESIGN (2019)
Biodegradable magnesium alloys as temporary orthopaedic implants: a review
Sepideh Kamrani et al.
BIOMETALS (2019)
Biomaterials for In Situ Tissue Regeneration: A Review
Saba Abdulghani et al.
BIOMOLECULES (2019)
Cell sheet technology: a promising strategy in regenerative medicine
Minxiong Li et al.
CYTOTHERAPY (2019)
Functionalization of an experimental Ti-Nb-Zr-Ta alloy with a biomimetic coating produced by plasma electrolytic oxidation
Jairo M. Cordeiro et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The current trends of Mg alloys in biomedical applications-A review
Usman Riaz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Silk fibroin coated TiO2 nanotubes for improved osteogenic property of Ti6Al4V bone implants
Sahely Saha et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Mechanical Properties and Microstructure of DMLS Ti6Al4V Alloy Dedicated to Biomedical Applications
Zaneta Anna Mierzejewska et al.
MATERIALS (2019)
Formation Mechanism, Corrosion Behavior, and Cytocompatibility of Microarc Oxidation Coating on Absorbable High-Purity Zinc
Wei Yuan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Polymethacrylic acid encapsulated TiO2 nanotubes for sustained drug release and enhanced antibacterial activities
Ling Huang et al.
NEW JOURNAL OF CHEMISTRY (2019)
Improved blood compatibility and cyto-compatibility of Zn-1Mg via plasma electrolytic oxidation
Yinying Sheng et al.
MATERIALIA (2019)
Surface modification of valve metals using plasma electrolytic oxidation for antibacterial applications: A review
Muhammad Rizwan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Selecting the correct cellular model for assessing of the biological response of collagen-based biomaterials
Natalia Davidenko et al.
ACTA BIOMATERIALIA (2018)
Breath figures in tissue engineering and drug delivery: State-of-the-art and future perspectives
Maria Teresa Calejo et al.
ACTA BIOMATERIALIA (2018)
Additively manufactured biodegradable porous magnesium
Y. Li et al.
ACTA BIOMATERIALIA (2018)
Tailoring of antibacterial and osteogenic properties of Ti6Al4V by plasma electrolytic oxidation
A. Santos-Coquillat et al.
APPLIED SURFACE SCIENCE (2018)
Poly(lactic-co-glycolic acid)(PLGA)/TiO2 nanotube bioactive composite as a novel scaffold for bone tissue engineering: In vitro and in vivo studies
Hossein Eslami et al.
BIOLOGICALS (2018)
Bio-functionalization of grade V titanium alloy with type I human collagen for enhancing and promoting human periodontal fibroblast cell adhesion - an in-vitro study
Jitendra Sharan et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Incorporation of BMP-2 nanoparticles on the surface of a 3D-printed hydroxyapatite scaffold using an epsilon-polycaprolactone polymer emulsion coating method for bone tissue engineering
Beom-Su Kim et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
In vitro degradation of a biodegradable polylactic acid/magnesium composite as potential bone augmentation material in the presence of titanium and PEEK dental implants
Tycho Zimmermann et al.
DENTAL MATERIALS (2018)
Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
Tse-Ming Chiu et al.
ELECTROCHIMICA ACTA (2018)
Thermosensitive hydrogel platforms with modulated ionic load for optimal cell sheet harvesting
Enrique Martinez-Campos et al.
EUROPEAN POLYMER JOURNAL (2018)
Tribological and Corrosion Properties of Coatings Produced by Plasma Electrolytic Oxidation on the ZA27 Alloy
Guangyin Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Antibiotic release from F-doped nanotubular oxide layer on TI6AL4V alloy to decrease bacterial viability
John-Jairo Aguilera-Correa et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Bioabsorbable magnesium versus standard titanium compression screws for fixation of distal metatarsal osteotomies-3 year results of a randomized clinical trial
Christian Plaass et al.
JOURNAL OF ORTHOPAEDIC SCIENCE (2018)
Formation of silicon-calcium-phosphate-containing coating on Mg-Zn-Ca alloy by a two-step micro-arc oxidation technique
Jinhe Dou et al.
MATERIALS LETTERS (2018)
Functional polymer surfaces for controlling cell behaviors
Lina Chen et al.
MATERIALS TODAY (2018)
A Review on the Electrochemically Self-organized Titania Nanotube Arrays: Synthesis, Modifications, and Biomedical Applications
Yu Fu et al.
NANOSCALE RESEARCH LETTERS (2018)
Development and properties of duplex MgF2/PCL coatings on biodegradable magnesium alloy for biomedical applications
Preeti Makkar et al.
PLOS ONE (2018)
An investigation into interaction between magnesium powder and Ar gas: Implications for selective laser melting of magnesium
Mojtaba Salehi et al.
POWDER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
In vitro and in vivo evaluation of PEO-modified titanium for bone implant applications
Ana Santos-Coquillat et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Effect of oxidation time on cytocompatibility of ultrafine-grained pure Ti in micro-arc oxidation treatment
Lin Xu et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Hybrid coatings with collagen and chitosan for improved bioactivity of Mg alloys
Laura C. Cordoba et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Investigation of Antibacterial Susceptibility of Ag-Doped Oxide Coatings onto AZ91 Magnesium Alloy by Microarc Oxidation Method
Ebru Emine Sukuroglu
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Effects of titanium nanotubes on the osseointegration, cell differentiation, mineralisation and antibacterial properties of orthopaedic implant surfaces
E. P. Su et al.
BONE & JOINT JOURNAL (2018)
A silk-based coating containing GREDVY peptide and heparin on Mg-Zn-Y-Nd alloy: improved corrosion resistance, hemocompatibility and endothelialization
Pei Wang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
A Review on the Electrochemically Self-organized Titania Nanotube Arrays: Synthesis, Modifications, and Biomedical Applications
Yu Fu et al.
NANOSCALE RESEARCH LETTERS (2018)
The Influence of the Electrolyte Nature and PEO Process Parameters on Properties of Anodized Ti-15Mo Alloy Intended for Biomedical Applications
Oksana Banakh et al.
METALS (2018)
Advances in functionalized polymer coatings on biodegradable magnesium alloys - A review
Ling-Yu Li et al.
ACTA BIOMATERIALIA (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
PLGA film/Titanium nanotubues as a sustained growth factor releasing system for dental implants
Shengjun Sun et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Enhanced corrosion resistance and cytocompatibility of biomimetic hyaluronic acid functionalised silane coating on AZ31 Mg alloy for orthopaedic applications
Sankalp Agarwal et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Surface modification of stainless steel for biomedical applications: Revisiting a century-old material
Aliya Bekmurzayeva et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Improvement of osteogenesis by a uniform PCL coating on a magnesium screw for biodegradable applications
Yu-Kyoung Kim et al.
SCIENTIFIC REPORTS (2018)
Effect of High- and Low-Molecular-Weight Hyaluronic-Acid-Functionalized-AZ31 Mg and Ti Alloys on Proliferation and Differentiation of Osteoblast Cells
Sankalp Agarwal et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Corrosion of Additively Manufactured Alloys: A Review
G. Sander et al.
CORROSION (2018)
Calcium Phosphate-Based Composite Coating by Micro-Arc Oxidation (MAO) for Biomedical Application: A Review
Muhammad Qadir et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2018)
Long-Term Stable Adhesion for Conducting Polymers in Biomedical Applications: IrOx and Nanostructured Platinum Solve the Chronic Challenge
Christian Boehler et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Dental implants modified with drug releasing titania nanotubes: therapeutic potential and developmental challenges
Karan Gulati et al.
EXPERT OPINION ON DRUG DELIVERY (2017)
Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications
Qun Wang et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2017)
Biopolymeric coatings for delivery of antibiotic and controlled degradation of bioresorbable Mg AZ31 alloys
A. Zomorodian et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2017)
Regeneration of subcutaneous tissue-engineered mandibular condyle in nude mice
Feiyu Wang et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
Effect of Annealing Treatments on the Microstructure, Mechanical Properties and Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V
Yangzi Xu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Stem cell-mediated functionalization of titanium implants
Deanna Ingrassia et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2017)
Compression fatigue behavior and failure mechanism of porous titanium for biomedical applications
Fuping Li et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Drug delivery and cytocompatibility of ciprofloxacin loaded gelatin nanofibers-coated Mg alloy
H. R. Bakhsheshi-Rad et al.
MATERIALS LETTERS (2017)
Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials
Zahra Gorgin Karaji et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Mechanical and degradation properties of biodegradable Mg strengthened poly-lactic acid composite through plastic injection molding
Muhammad Shoaib Butt et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo
Bingjing Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
A review of TiO2 NTs on Ti metal: Electrochemical synthesis, functionalization and potential use as bone implants
Nasser K. Awad et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
A cytocompatible micro/nano-textured surface with Si-doped titania mesoporous arrays fabricated by a one-step anodization
Huibing Liu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Reduced bacteria adhesion on octenidine loaded mesoporous silica nanoparticles coating on titanium substrates
Gaoqiang Xu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Corrosion and surface modification on biocompatible metals: A review
R. I. M. Asri et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing
Chang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
L. Y. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Bioactive plasma electrolytic oxidation coatings on Mg-Ca alloy to control degradation behaviour
M. Mohedano et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Increased stem cells delivered using a silk gel/scaffold complex for enhanced bone regeneration
Xun Ding et al.
SCIENTIFIC REPORTS (2017)
Antibacterial properties of nanostructured Cu-TiO2 surfaces for dental implants
Jonathan Rosenbaum et al.
BIOMATERIALS SCIENCE (2017)
Biopolymeric coatings for delivery of antibiotic and controlled degradation of bioresorbable Mg AZ31 alloys
A. Zomorodian et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2017)
Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone
F. S. L. Bobbert et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Self-Healing Behavior of Sodium Polyacrylate-Hydroxyapatite Coatings on Biodegradable Magnesium Alloy
Sachiko Hiromoto et al.
CORROSION (2017)
The Prospects of Zinc as a Structural Material for Biodegradable Implants-A Review Paper
Galit Katarivas Levy et al.
METALS (2017)
Mg and Its Alloys for Biomedical Applications: Exploring Corrosion and Its Interplay with Mechanical Failure
Mirco Peron et al.
METALS (2017)
Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Ana Civantos et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Coatings on implants: Study on similarities and differences between the PCL coatings for Mg based lab coupons and final components
Deepa B. Prabhu et al.
MATERIALS & DESIGN (2017)
Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Ana Civantos et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Review of Antibacterial Activity of Titanium-Based Implants' Surfaces Fabricated by Micro-Arc Oxidation
Xiaojing He et al.
COATINGS (2017)
Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?
Mathieu Maisani et al.
JOURNAL OF TISSUE ENGINEERING (2017)
Fabrication of silver- and strontium-doped hydroxyapatite/TiO2 nanotube bilayer coatings for enhancing bactericidal effect and osteoinductivity
Yong Huang et al.
CERAMICS INTERNATIONAL (2017)
Breath-Figure Self-Assembly, a Versatile Method of Manufacturing Membranes and Porous Structures: Physical, Chemical and Technological Aspects
Edward Bormashenko
MEMBRANES (2017)
Bone grafts and biomaterials substitutes for bone defect repair: A review
Wenhao Wang et al.
BIOACTIVE MATERIALS (2017)
Surface Modification of Polymer Substrates for Biomedical Applications
Oldrich Nedela et al.
MATERIALS (2017)
Multifunctional bioactive glass and glass-ceramic biomaterials with antibacterial properties for repair and regeneration of bone tissue
Joao S. Fernandes et al.
ACTA BIOMATERIALIA (2017)
Data on the surface morphology of additively manufactured Ti-6Al-4V implants during processing by plasma electrolytic oxidation
Ingmar A. J. van Hengel et al.
DATA IN BRIEF (2017)
Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31
Lan-Yue Cui et al.
CORROSION SCIENCE (2017)
Synthesis of calcium-phosphorous doped TiO2 nanotubes by anodization and reverse polarization: A promising strategy for an efficient biofunctional implant surface
Sofia A. Alves et al.
APPLIED SURFACE SCIENCE (2017)
Inhibitory effect of super-hydrophobicity on silver release and antibacterial properties of super-hydrophobic Ag/TiO2 nanotubes
Licheng Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
In vitro bioactivity investigations of Ti-15Mo alloy after electrochemical surface modification
Alicja Kazek-Kesik et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
Fabrication and characterization of gold nanoparticle-loaded TiO2 nanotube arrays for medical implants
Yu Bai et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
Toward Cell Selective Surfaces: Cell Adhesion and Proliferation on Breath Figures with Antifouling Surface Chemistry
Enrique Martinez-Campos et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly(L-lactic acid) Composite Coating on Mg-1Li-1Ca Alloy for Orthopedic Implants
Rong-Chang Zeng et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Sr, Mg, and Co Substituted Hydroxyapatite Coating on TiO2 Nanotubes Formed by Electrochemical Methods
Subhasmita Swain et al.
ADVANCED SCIENCE LETTERS (2016)
Role of PEO coatings in long-term biodegradation of a Mg alloy
E. Matykina et al.
APPLIED SURFACE SCIENCE (2016)
Enhancing antimicrobial activity of TiO2/Ti by torularhodin bioinspired surface modification
Camelia Ungureanu et al.
BIOELECTROCHEMISTRY (2016)
Cytocompatibility and antibacterial activity of titania nanotubes incorporated with gold nanoparticles
Tingting Yang et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
In Situ Potentiostatic Deposition of Calcium Phosphate with Gentamicin-Loaded Chitosan Nanoparticles on Titanium Alloy Surfaces
Midhun B. Thomas et al.
ELECTROCHIMICA ACTA (2016)
Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
Yuwei Zhai et al.
ENGINEERING FAILURE ANALYSIS (2016)
Salvage of Severe Foot and Ankle Trauma With a 3D Printed Scaffold
Kamran S. Hamid et al.
FOOT & ANKLE INTERNATIONAL (2016)
Drug release characteristics of quercetin-loaded TiO2 nanotubes coated with chitosan
L. Mohan et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)
The microstructure, mechanical properties and degradation behavior of laser-melted Mg-Sn alloys
Yuanzhuo Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Tackling Mg alloy corrosion by natural polymer coatingsA review
Svenja Heise et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)
Synergistic influence of topomimetic and chondroitin sulfate-based treatments on osteogenic potential of Ti-6Al-4V
Beatrice Labat et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)
Cranioplasty Enhanced by Three-Dimensional Printing: Custom-Made Three-Dimensional-Printed Titanium Implants for Skull Defects
Eun-Kyung Park et al.
JOURNAL OF CRANIOFACIAL SURGERY (2016)
Fabrication mechanism of nanostructured HA/TNTs biomedical coatings: an improvement in nanomechanical and in vitro biological responses
Shahab Ahmadi et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
Effect of silane-coupling modification on bioactivity and in vitro properties of anodized titania nanotube arrays
Negin Khoshnood et al.
MATERIALS LETTERS (2016)
Porous Ti6Al4V alloys with enhanced normalized fatigue strength for biomedical applications
Fuping Li et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Anodization parameters influencing the morphology and electrical properties of TiO2 nanotubes for living cell interfacing and investigations
D. Khudhair et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Enhanced mechanical properties and increased corrosion resistance of a biodegradable magnesium alloy by plasma electrolytic oxidation (PEO)
Leon White et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)
Effect of dexamethasone, beta-glycerophosphate, OGP and BMP2 in TiO2 nanotubes on differentiation of MSCs
Yan Zhang et al.
MATERIALS TECHNOLOGY (2016)
Fourth-generation biomedical materials
Chengyun Ning et al.
MATERIALS TODAY (2016)
Quality cell therapy manufacturing by design
Yonatan Y. Lipsitz et al.
NATURE BIOTECHNOLOGY (2016)
Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium
Monica Mahesh Savalani et al.
RAPID PROTOTYPING JOURNAL (2016)
Biomedical titanium alloys and their additive manufacturing
Yu-Lin Hao et al.
RARE METALS (2016)
Bioactive coatings on Ti6Al4V alloy formed by plasma electrolytic oxidation
Salih Durdu et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Electrochemical deposition of calcium phosphates on magnesium and its alloys for improved biodegradation performance: A review
M. Bobby Kannan
SURFACE & COATINGS TECHNOLOGY (2016)
Formation and characterization of ZnO films on zinc substrate by plasma electrolytic oxidation
Stevan Stojadinovic et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Hybrid oxide-polymer layer formed on Ti-15Mo alloy surface enhancing antibacterial and osseointegration functions
Alicja Kazek-Kesik et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Fabrication and characterization of hydrophobic microarc oxidation/poly-lactic acid duplex coating on biodegradable Mg-Ca alloy for corrosion protection
H. R. Bakhsheshi-Rad et al.
VACUUM (2016)
Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
Jing Guo et al.
MATERIALS (2016)
Characteristics and in vitro response of thin hydroxyapatite-titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions
W. K. Yeung et al.
RSC ADVANCES (2016)
Nanostructured scaffold as a determinant of stem cell fate
Lekshmi Krishna et al.
STEM CELL RESEARCH & THERAPY (2016)
Enhanced osteoblast differentiation and osseointegration of a bio-inspired HA nanorod patterned pore-sealed MgO bilayer coating on magnesium
Bo Li et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Osteogenic and angiogenic activities of silicon-incorporated TiO2 nanotube arrays
Long Bai et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Regulation of local bone remodeling mediated by hybrid multilayer coating embedded with hyaluronan-alendronate/BMP-2 nanoparticles on Ti6Al7Nb implants
Xinkun Shen et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Alendronate-loaded hydroxyapatite-TiO2 nanotubes for improved bone formation in osteoporotic rabbits
Xinkun Shen et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Enhanced mechanical properties and increased corrosion resistance of a biodegradable magnesium alloy by plasma electrolytic oxidation (PEO)
Leon White et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)
Understanding and managing in-stent restenosis: a review of clinical data, from pathogenesis to treatment
Dario Buccheri et al.
JOURNAL OF THORACIC DISEASE (2016)
Metal Injection Molding (MIM) of Magnesium and Its Alloys
Martin Wolff et al.
METALS (2016)
Self-assembly chitosan/gelatin composite coating on icariin-modified TiO2 nanotubes for the regulation of osteoblast bioactivity
Yanli Zhang et al.
MATERIALS & DESIGN (2016)
Cecropin B loaded TiO2 nanotubes coated with hyaluronidase sensitive multilayers for reducing bacterial adhesion
Xinkun Shen et al.
MATERIALS & DESIGN (2016)
Ti scaffolds with tailored porosities and mechanical properties using porous polymer templates
Jung-Bin Lee et al.
MATERIALS & DESIGN (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Silicon-Doped Titanium Dioxide Nanotubes Promoted Bone Formation on Titanium Implants
Xijiang Zhao et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)
ANTIBACTERIAL COMPOSITE LAYERS ON Ti: ROLE OF ZNO NANOPARTICLES
A. Roguska et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Magnesium incorporated chitosan based scaffolds for tissue engineering applications
Udhab Adhikari et al.
BIOACTIVE MATERIALS (2016)
Corrosion Properties of Polydopamine Coatings Formed in One-Step Immersion Process on Magnesium
Ferdinand Singer et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Processing and Characterization of SrTiO3-TiO2 Nanoparticle-Nanotube Heterostructures on Titanium for Biomedical Applications
Yu Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Physicochemical properties and in vitro cytocompatibility of modified titanium surfaces prepared via micro-arc oxidation with different calcium concentrations
Sui-Dan Wu et al.
APPLIED SURFACE SCIENCE (2015)
Recent advances in the use of gelatin in biomedical research
Kai Su et al.
BIOTECHNOLOGY LETTERS (2015)
A new complex ceramic coating with carbon nano-tubes, hydroxyapatite and TiO2 nanotubes on Ti surface for biomedical applications
Mariana Prodana et al.
CERAMICS INTERNATIONAL (2015)
Breath Figure: A Nature-Inspired Preparation Method for Ordered Porous Films
Aijuan Zhang et al.
CHEMICAL REVIEWS (2015)
Advances in microarc oxidation coated AZ31 Mg alloys for biomedical applications
Lei Zhang et al.
CORROSION SCIENCE (2015)
Electrochemical Anisotropy of Nanostructured Titanium for Biomedical Implants
E. Matykina et al.
ELECTROCHIMICA ACTA (2015)
被撤回的出版物: Optimizing stem cell functions and antibacterial properties of TiO2 nanotubes incorporated with ZnO nanoparticles: experiments and modeling (Retracted article. See vol. 17, pg. 463, 2022)
Wenwen Liu et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2015)
Use of anodized titanium alloy as drug carrier: Ibuprofen as model of drug releasing
Antonio L. Doadrio et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
A Novel, Single Step, Highly Sensitive In-Vitro Cell-Based Metabolic Assay Using Honeycomb Microporous Polymer Membranes
Shiny Velayudhan et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2015)
Electrochemical behavior of zinc in KOH media at high voltage: Micro-arc oxidation of zinc
Emmanuel Rocca et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Galina Kasperovich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Multifunctional MgF2/Polydopamine Coating on Mg Alloy for Vascular Stent Application
Xiaoli Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Osseointegration improvement by plasma electrolytic oxidation of modified titanium alloys surfaces
Monica Echeverry-Rendon et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg-Zn-Zr components
Kaiwen Wei et al.
MATERIALS LETTERS (2015)
Biological properties of nanostructured Ti incorporated with Ca, P and Ag by electrochemical method
Baoe Li et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Bioactivity of coatings formed on Ti-13Nb-13Zr alloy using plasma electrolytic oxidation
Maciej Sowa et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
TiO2 nanotube composite layers as delivery system for ZnO and Ag nanoparticles - An unexpected overdose effect decreasing their antibacterial efficacy
A. Roguska et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Surface characterization and corrosion behavior of calcium phosphate-base composite layer on titanium and its alloys via plasma electrolytic oxidation: A review paper
A. R. Rafieerad et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
Ruben Wauthle et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Metallic implant biomaterials
Qizhi Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
Antibacterial and osteogenic stem cell differentiation properties of photoinduced TiO2 nanoparticle-decorated TiO2 nanotubes
Wenwen Liu et al.
NANOMEDICINE (2015)
Towards 4th generation biomaterials: a covalent hybrid polymer-ormoglass architecture
N. Sachot et al.
NANOSCALE (2015)
Titanium nanostructures for biomedical applications
M. Kulkarni et al.
NANOTECHNOLOGY (2015)
Gas sensitive luminescence of ZnO coatings obtained by plazma electrolytic oxidation
L. Grigorjeva et al.
SENSORS AND ACTUATORS A-PHYSICAL (2015)
Characterization and corrosion evaluation of TiO2:n-HA coatings on titanium alloy formed by plasma electrolytic oxidation
D. Dzhurinskiy et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effects of electrolytes on the growth behavior, microstructure and tribological properties of plasma electrolytic oxidation coatings on a ZA27 alloy
Guangdong Bian et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Formation of grooved and porous coatings on titanium by plasma electrolytic oxidation in H2SO4/H3PO4 electrolytes and effects of coating morphology on adhesive bonding
O. A. Galvis et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Polydopamine-induced nanocomposite Ag/CaP coatings on the surface of titania nanotubes for antibacterial and osteointegration functions
Ming Li et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
Review of the biocompatibility of micro-arc oxidation coated titanium alloys
Yi Wang et al.
MATERIALS & DESIGN (2015)
Utility of tricalcium phosphate and osteogenic matrix cell sheet constructs for bone defect reconstruction
Tomoyuki Ueha et al.
WORLD JOURNAL OF STEM CELLS (2015)
Surface modification of biodegradable magnesium and its alloys for biomedical applications
Peng Tian et al.
REGENERATIVE BIOMATERIALS (2015)
Recent advances on the development of magnesium alloys for biodegradable implants
Yongjun Chen et al.
ACTA BIOMATERIALIA (2014)
Fibrin-based biomaterials: Modulation of macroscopic properties through rational design at the molecular level
Ashley C. Brown et al.
ACTA BIOMATERIALIA (2014)
In vitro bioactivity and corrosion resistance of Zr incorporated TiO2 nanotube arrays for orthopaedic applications
K. Indira et al.
APPLIED SURFACE SCIENCE (2014)
Effect of current mode on PEO treatment of magnesium in Ca- and P-containing electrolyte and resulting coatings
Yonghao Gao et al.
APPLIED SURFACE SCIENCE (2014)
Hydroxyapatite electrodeposition on anodized titanium nanotubes for orthopedic applications
Yardnapar Parcharoen et al.
APPLIED SURFACE SCIENCE (2014)
Electrophoretic Deposition of Carbon Nanotubes over TiO2 Nanotubes: Evaluation of Surface Properties and Biocompatibility
Jung Eun Park et al.
BIOINORGANIC CHEMISTRY AND APPLICATIONS (2014)
Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes
Shenglin Mei et al.
BIOMATERIALS (2014)
Decellularized tissue and cell-derived extracellular matrices as scaffolds for orthopaedic tissue engineering
Christina W. Cheng et al.
BIOTECHNOLOGY ADVANCES (2014)
Diameter selective behavior of human nasal epithelial cell on Ag-coated TiO2 nanotubes
Ming-Ying Lan et al.
CERAMICS INTERNATIONAL (2014)
Smart drug delivery systems: from fundamentals to the clinic
Carmen Alvarez-Lorenzo et al.
CHEMICAL COMMUNICATIONS (2014)
Polydopamine and Its Derivative Materials: Synthesis and Promising Applications in Energy, Environmental, and Biomedical Fields
Yanlan Liu et al.
CHEMICAL REVIEWS (2014)
Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg-Zr-Ca alloy implants
Dolly Mushahary et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2014)
A bioactive elastin-like recombinamer reduces unspecific protein adsorption and enhances cell response on titanium surfaces
Emiliano Salvagni et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2014)
Effects of polydopamine functionalized titanium dioxide nanotubes on endothelial cell and smooth muscle cell
Si Zhong et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2014)
Composite polymer-containing protective coatings on magnesium alloy MA8
S. V. Gnedenkov et al.
CORROSION SCIENCE (2014)
Metal release from ceramic coatings for dental implants
M. Mohedano et al.
DENTAL MATERIALS (2014)
In vitro resistance of titanium and resorbable (poly L-CO-DL lactic acid) osteosynthesis in mandibular body fracture
J. Rodriguez-Chessa et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2014)
Synthesis and properties of a bio-composite coating formed on magnesium alloy by one-step method of micro-arc oxidation
Xun Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
In-vitro biocompatibility and corrosion resistance of strontium incorporated TiO2 nanotube arrays for orthopaedic applications
K. Indira et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2014)
Creation of nanoporous TiO2 surface onto polyetheretherketone for effective immobilization and delivery of bone morphogenetic protein
Cheol-Min Han et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Size tuning of Ag-decorated TiO2 nanotube arrays for improved bactericidal capacity of orthopedic implants
N. Esfandiari et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Magnesium biomaterials for orthopedic application: A review from a biological perspective
Jemimah Walker et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2014)
Anodic Growth and Biomedical Applications of TiO2 Nanotubes
Aaron F. Cipriano et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Scaffold Design for Bone Regeneration
Liliana Polo-Corrales et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)
Synthesis and electrochemical study of a hybrid structure based on PDMS-TEOS and titania nanotubes for biomedical applications
Antonio G. B. Castro et al.
NANOTECHNOLOGY (2014)
Anisotropic porous titanium with superior mechanical compatibility in the range of physiological strain rate for trabecular bone implant applications
Fuping Li et al.
MATERIALS LETTERS (2014)
Development and degradation behavior of magnesium scaffolds coated with polycaprolactone for bone tissue engineering
Mostafa Yazdimamaghani et al.
MATERIALS LETTERS (2014)
Characterization and antibacterial performance of electrodeposited chitosan-vancomycin composite coatings for prevention of implant-associated infections
F. Ordikhani et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Gelatin functionalised porous titanium alloy implants for orthopaedic applications
E. Vanderleyden et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Biodegradable metals
Y. F. Zheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy
Kaiwen Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Chitosan Scaffolds Containing Calcium Phosphate Salts and rhBMP-2: In Vitro and In Vivo Testing for Bone Tissue Regeneration
Rodrigo Guzman et al.
PLOS ONE (2014)
Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges
T. S. N. Sankara Narayanan et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Towards hierarchically ordered functional porous polymeric surfaces prepared by the breath figures approach
Alexandra Munoz-Bonilla et al.
PROGRESS IN POLYMER SCIENCE (2014)
Titanium dioxide nanotubes/calcium silicate composite coatings prepared by alternative loop immersion method
Ping Li et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Dipcoating of poly (ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion protection
Mohd Faiz Mohd Yusoff et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Deposition of microarc oxidation-polycaprolactone duplex coating to improve the corrosion resistance of magnesium for biodegradable implants
Long-Hao Li et al.
THIN SOLID FILMS (2014)
Morphology of hydroxyapatite nanoparticles in coatings on nanotube-formed Ti-Nb-Zr alloys for dental implants
Yong-Hoon Jeong et al.
VACUUM (2014)
Electrosprayed PLGA smart containers for active anti-corrosion coating on magnesium alloy AMlite
Jing-Yu Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Magnesium-based implants: a mini-review
Berengere J. C. Luthringer et al.
MAGNESIUM RESEARCH (2014)
Applications and emerging trends of hyaluronic acid in tissue engineering, as a dermal filler and in osteoarthritis treatment
A. Fakhari et al.
ACTA BIOMATERIALIA (2013)
Modification of TiO2 nanotube surfaces by electro-spray deposition of amoxicillin combined with PLGA for bactericidal effects at surgical implantation sites
Jung-Hwan Lee et al.
ACTA ODONTOLOGICA SCANDINAVICA (2013)
How smart do biomaterials need to be? A translational science and clinical point of view
Boris Michael Holzapfel et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
Construct Scaffold-like delivery system with poly (lactic-co-glycolic) microspheres on micro-arc oxidation titanium
Lin Wang et al.
APPLIED SURFACE SCIENCE (2013)
Multilayered coating on titanium for controlled release of antimicrobial peptides for the prevention of implant-associated infections
Mehdi Kazemzadeh-Narbat et al.
BIOMATERIALS (2013)
The promotion of osseointegration of titanium surfaces by coating with silk protein sericin
Sunita Nayak et al.
BIOMATERIALS (2013)
Fabrication of selenium-deposited and chitosan-coated titania nanotubes with anticancer and antibacterial properties
Xiuyong Chen et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Cell response of anodized nanotubes on titanium and titanium alloys
Sepideh Minagar et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Bioactive plasma electrolytic oxidation coatings-The role of the composition, microstructure, and electrochemical stability
M. Mohedano et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Porous TiO2 surface formed on nickel-titanium alloy by plasma electrolytic oxidation: A prospective polymer-free reservoir for drug eluting stent applications
Zhiguang Huan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Stability of plasma electrolytic oxidation coating on titanium in artificial saliva
E. Matykina et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2013)
Sustained ibuprofen release using composite poly(lactic-co-glycolic acid)/titanium dioxide nanotubes from Ti implant surface
Huiying Jia et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Honeycomb Porous Films Prepared from Porphyrin-Cored Star Polymers: Submicrometer Pores Induced by Transition of Monolayer into Multilayer Structures
Liang-Wei Zhu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting
Jianfeng Sun et al.
MATERIALS & DESIGN (2013)
Effect of electrolyte concentration on microstructure and properties of micro arc oxidized hydroxyapatite/titania nanostructured composite
S. Abbasi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
In vitro metal ion release and biocompatibility of amorphous Mg67Zn28Ca5 alloy with/without gelatin coating
W. Y. Chan et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Controlling the degradation rate of AZ91 magnesium alloy via sol-gel derived nanostructured hydroxyapatite coating
Ramin Rojaee et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Characterization of grade 2 commercially pure Trabecular Titanium structures
E. Marin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing
D. V. Gunderov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
DC plasma electrolytic oxidation of biodegradable cp-Mg: In-vitro corrosion studies
Y. Gao et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Dual action antibacterial TiO2 nanotubes incorporated with silver nanoparticles and coated with a quaternary ammonium salt (QAS)
Xiuyong Chen et al.
SURFACE & COATINGS TECHNOLOGY (2013)
The effect of processing parameters and substrate composition on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloys
R. O. Hussein et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Integrin-mediated osteoblastic adhesion on a porous manganese-incorporated TiO2 coating prepared by plasma electrolytic oxidation
Zhenxiang Zhang et al.
EXPERIMENTAL AND THERAPEUTIC MEDICINE (2013)
Synthesis and Characterization of Encapsulated Nanosilica Particles with an Acrylic Copolymer by in Situ Emulsion Polymerization Using Thermoresponsive Nonionic Surfactant
Mostafa Yazdimamaghani et al.
MATERIALS (2013)
Platelet-rich plasma (PRP) in dental and oral surgery: from the wound healing to bone regeneration
Antonino Albanese et al.
IMMUNITY & AGEING (2013)
Variations to the Nanotube Surface for Bone Regeneration
Christine J. Frandsen et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2013)
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
Huan Zhou et al.
ACTA BIOMATERIALIA (2012)
Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: A review
Susmita Bose et al.
ACTA BIOMATERIALIA (2012)
Biomedical coatings on magnesium alloys - A review
H. Hornberger et al.
ACTA BIOMATERIALIA (2012)
Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting
S. J. Li et al.
ACTA MATERIALIA (2012)
MAO-derived hydroxyapatite/TiO2 nanostructured multi-layer coatings on titanium substrate
S. Abbasi et al.
APPLIED SURFACE SCIENCE (2012)
In vitro degradation of biodegradable polymer-coated magnesium under cell culture condition
Liping Xu et al.
APPLIED SURFACE SCIENCE (2012)
Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants
Abdalla Abdal-hay et al.
APPLIED SURFACE SCIENCE (2012)
Substrate dependent stability of conducting polymer coatings on medical electrodes
Rylie A. Green et al.
BIOMATERIALS (2012)
Repair of articular cartilage defect with layered chondrocyte sheets and cultured synovial cells
Satoshi Ito et al.
BIOMATERIALS (2012)
Ten Years Later. Results from a Prospective Single-Centre Clinical Study on 121 Oxidized (TiUnite™) Branemark Implants in 46 Patients
Par-Olov Ostman et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2012)
Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating
Liping Xu et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2012)
In vitro corrosion survey of Mg-xCa and Mg-3Zn-yCa alloys with and without calcium phosphate conversion coatings
X. -B. Chen et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2012)
Effect of [Ca2+] and [PO43-] levels on the formation of calcium phosphate conversion coatings on die-cast magnesium alloy AZ91D
X. -B. Chen et al.
CORROSION SCIENCE (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
In vitro assessment of Staphylococcus epidermidis and Staphylococcus aureus adhesion on TiO2 nanotubes on Ti-6Al-4V alloy
Concepcion Perez-Jorge et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Surface characterization of Ca-P/Ag/TiO2 nanotube composite layers on Ti intended for biomedical applications
Agata Roguska et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Improved anticorrosion of magnesium alloy via layer-by-layer self-assembly technique combined with micro-arc oxidation
Peng Liu et al.
MATERIALS LETTERS (2012)
MAO-derived hydroxyapatite-TiO2 nanostructured bio-ceramic films on titanium
S. Abbasi et al.
MATERIALS RESEARCH BULLETIN (2012)
Micropattern of nano-hydroxyapatite/silk fibroin composite onto Ti alloy surface via template-assisted electrostatic spray deposition
Yunrong Zhu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Effects of fluorides on apoptosis and activation of human umbilical vein endothelial cells
M. Szczepanski et al.
ORAL DISEASES (2012)
A review of protein adsorption on bioceramics
Kefeng Wang et al.
INTERFACE FOCUS (2012)
Effects of Surface Charges on Dental Implants: Past, Present, and Future
Cecilia Yan Guo et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2012)
Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
D. Vojtech et al.
ACTA BIOMATERIALIA (2011)
Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy
X. N. Gu et al.
ACTA BIOMATERIALIA (2011)
Antibacterial nano-structured titania coating incorporated with silver nanoparticles
Lingzhou Zhao et al.
BIOMATERIALS (2011)
Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants
Lucie Bacakova et al.
BIOTECHNOLOGY ADVANCES (2011)
Controllable biodegradability, drug release behavior and hemocompatibility of PTX-eluting magnesium stents
Ping Lu et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2011)
Review of Corrosion-Resistant Conversion Coatings for Magnesium and Its Alloys
X. B. Chen et al.
CORROSION (2011)
A simple route towards a hydroxyapatite-Mg(OH)2 conversion coating for magnesium
X. -B. Chen et al.
CORROSION SCIENCE (2011)
Growth of TiO2-based nanotubes on Ti-6Al-4V alloy
E. Matykina et al.
ELECTROCHIMICA ACTA (2011)
Performance-driven design of Biocompatible Mg alloys
Nicholas T. Kirkland et al.
JOM (2011)
Evaluation of magnesium ions release, biocorrosion, and hemocompatibility of MAO/PLLA-modified magnesium alloy WE42
Ping Lu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
Titania nanotubes supported gelatin stabilized gold nanoparticles for medical implants
Madhav Prasad Neupane et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Fabrication and characterization of bioactive composite coatings on Mg-Zn-Ca alloy by MAO/sol-gel
J. H. Gao et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)
Anticorrosion and cytocompatibility behavior of MAO/PLLA modified magnesium alloy WE42
Meiqing Guo et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)
Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting
L. E. Murr et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)
Synthesis of latex based antibacterial acrylate polymer/nanosilver via in situ miniemulsion polymerization
Mostafa Yazdi Mamaghani et al.
MACROMOLECULAR RESEARCH (2011)
Polydopamine-a nature-inspired polymer coating for biomedical science
Martin E. Lynge et al.
NANOSCALE (2011)
Corrosion and drug release properties of EN-plating/PLGA composite coating on MAO film
Ping Lu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Corrosion mechanism applicable to biodegradable magnesium implants
Andrej Atrens et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Porous TiO2 films on Ti implants for controlled release of tetracycline-hydrochloride (TCH)
Cheol-Min Han et al.
THIN SOLID FILMS (2011)
Synthesis and properties of hydroxyapatite-containing porous titania coating on ultrafine-grained titanium by micro-arc oxidation
Z. Q. Yao et al.
ACTA BIOMATERIALIA (2010)
Interfacial Adhesion Between Polymer Separation Layer and Ceramic Support for Composite Membrane
Wang Wei et al.
AICHE JOURNAL (2010)
Cross-linked gelatin/nanoparticles composite coating on micro-arc oxidation film for corrosion and drug release
Xinhua Xu et al.
APPLIED SURFACE SCIENCE (2010)
A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants
Hoi Man Wong et al.
BIOMATERIALS (2010)
Nanoscale engineering of biomimetic surfaces: cues from the extracellular matrix
Klaus von der Mark et al.
CELL AND TISSUE RESEARCH (2010)
Hydroxyapatite surface solubility and effect on cell adhesion
Sergio Bertazzo et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2010)
Growth characteristics and corrosion resistance of micro-arc oxidation coating on pure magnesium for biomedical applications
Lichen Zhao et al.
CORROSION SCIENCE (2010)
TiO2 nanotube structures for enhanced cell and biological functionality
Karla S. Brammer et al.
JOM (2010)
Preparation and in vitro evaluation of nanostructured TiO2/TCP composite coating by plasma electrolytic oxidation
Hongjie Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
In vitro evaluation of cell proliferation and collagen synthesis on titanium following plasma electrolytic oxidation
Paul Whiteside et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)
Release of PLGA-encapsulated dexamethasone from microsphere loaded porous surfaces
G. J. S. Dawes et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Micropatterned Polyvinyl Butyral Membrane for Acid-Base Diodes
Laszlo Roszol et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Cross-Linked Bioreducible Layer-by-Layer Films for Increased Cell Adhesion and Transgene Expression
Jenifer Blacklock et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Nanotopographical modification: a regulator of cellular function through focal adhesions
Manus Jonathan Paul Biggs et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2010)
Cytotoxicity of nanostructured vanadium oxide on human cells in vitro
Laura S. Rhoads et al.
TOXICOLOGY IN VITRO (2010)
Gene expression profile on chitosan/rhBMP-2 films: A novel osteoinductive coating for implantable materials
Ander Abarrategi et al.
ACTA BIOMATERIALIA (2009)
Adjustment of the ratio of Ca/P in the ceramic coating on Mg alloy by plasma electrolytic oxidation
Zhongping Yao et al.
APPLIED SURFACE SCIENCE (2009)
Corrosion of magnesium and its alloys
L. J. Liu et al.
CORROSION SCIENCE (2009)
Degradable biomaterials based on magnesium corrosion
Frank Witte et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2009)
Accelerated growth of preosteoblastic cells on ultrafine grained titanium
Y. Estrin et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Prolonged Antibiotic Delivery From Anodized Nanotubular Titanium Using a Co-precipitation Drug Loading Method
Chang Yao et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Antibacterial Coatings on Titanium Implants
Lingzhou Zhao et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Engineering Polymer Surfaces with Variable Chemistry and Topography
Alexandra Munoz-Bonilla et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Amphiphilic TiO2 Nanotube Arrays: An Actively Controllable Drug Delivery System
Yan-Yan Song et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Anodic fabrication and bioactivity of Nb-doped TiO2 nanotubes
Dongyan Ding et al.
NANOTECHNOLOGY (2009)
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Bruno Zberg et al.
NATURE MATERIALS (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Aluminium and lead: molecular mechanisms of brain toxicity
Sandra V. Verstraeten et al.
ARCHIVES OF TOXICOLOGY (2008)
The development of binary Mg-Ca alloys for use as biodegradable materials within bone
Zijian Li et al.
BIOMATERIALS (2008)
Photoelectrochemical and water photoelectrolysis properties of ordered TiO2 nanotubes fabricated by Ti anodization in fluoride-free HCl electrolytes
Nageh K. Allam et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Influence of membrane surface properties on the growth of neuronal cells isolated from hippocampus
Loredana De Bartolo et al.
JOURNAL OF MEMBRANE SCIENCE (2008)
Biomaterials in orthopaedics
M. Navarro et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2008)
Influence of inhibitor addition on the corrosion protection performance of sol-gel coatings on AA2024
K. A. Yasakau et al.
PROGRESS IN ORGANIC COATINGS (2008)
Improvement of porous β-TCP scaffolds with rhBMP-2 chitosan carrier film for bone tissue application
Ander Abarrategi et al.
TISSUE ENGINEERING PART A (2008)
Cell colonization in degradable 3D porous matrices
Benjamin J. Lawrence et al.
CELL ADHESION & MIGRATION (2008)
Decreased Staphylococcus epidermis adhesion and increased osteoblast functionality on antibiotic-loaded titania nanotubes
Ketul C. Popat et al.
BIOMATERIALS (2007)
Elastin as a biomaterial for tissue engineering
W. F. Daamen et al.
BIOMATERIALS (2007)
Effect of honeycomb-patterned surface topography on the adhesion and signal transduction of porcine aortic endothelial cells
S. Yamamoto et al.
LANGMUIR (2007)
Temporary scaffolding of coronary arteries with bioabsorbable magnesium stents:: a prospective, non-randomised multicentre trial
Raimund Erbel et al.
LANCET (2007)
A possible biodegradable magnesium implant material
Guangling Song et al.
ADVANCED ENGINEERING MATERIALS (2007)
Combined marrow stromal cell-sheet techniques and high-strength biodegradable composite scaffolds for engineered functional bone grafts
Yefang Zhou et al.
BIOMATERIALS (2007)
TiO2 nanotubes:: Self-organized electrochemical formation, properties and applications
J. M. Macak et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2007)
Anodic growth of self-organized anodic TiO2 nanotubes in viscous electrolytes
Jan M. Macak et al.
ELECTROCHIMICA ACTA (2006)
In vitro and in vivo corrosion measurements of magnesium alloys
F Witte et al.
BIOMATERIALS (2006)
Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta
Matthias Peuster et al.
BIOMATERIALS (2006)
Simultaneous implant placement and bone regeneration around dental implants using tissue-engineered bone with fibrin glue, mesenchymal stem cells and platelet-rich plasma
Kenji Ito et al.
CLINICAL ORAL IMPLANTS RESEARCH (2006)
Titanium alloys for biomedical applications
H. J. Rack et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Formation of honeycomb-structured, porous films via breath figures with different polymer architectures
MH Stenzel et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2006)
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
K Rezwan et al.
BIOMATERIALS (2006)
Methods for fabrication of nanoscale topography for tissue engineering scaffolds
J Norman et al.
ANNALS OF BIOMEDICAL ENGINEERING (2006)
In vivo corrosion of four magnesium alloys and the associated bone response
F Witte et al.
BIOMATERIALS (2005)
Chitosan microspheres as a potential carrier for drugs
VR Sinha et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Designing materials for biology and medicine
R Langer et al.
NATURE (2004)
Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior
YM Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Bone tissue engineering: State of the art and future trends
AJ Salgado et al.
MACROMOLECULAR BIOSCIENCE (2004)
Cell sheet engineering
Masayuki Yamato et al.
MATERIALS TODAY (2004)
Novel porous aortic elastin and collagen scaffolds for tissue engineering
QJ Lu et al.
BIOMATERIALS (2004)
Why degradable polymers undergo surface erosion or bulk erosion
F von Burkersroda et al.
BIOMATERIALS (2002)
Effect of surface topography and chemistry on adhesion, orientation and growth of fibroblasts on nickel-titanium substrates
L Ponsonnet et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Effects of fibrin on the integration hydroxyapatite coating implants: experimental study in a rabbit model
M Morales et al.
JOURNAL OF EXPERIMENTAL ANIMAL SCIENCE (2002)
Protective coatings on magnesium and its alloys - a critical review
JE Gray et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Recent metallic materials for biomedical applications
M Niinomi
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Role of magnesium in genomic stability
A Hartwig
MUTATION RESEARCH-FUNDAMENTAL AND MOLECULAR MECHANISMS OF MUTAGENESIS (2001)
Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy
AL Yerokhin et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Coronary morphologic findings alter stent implantation
PH Grewe et al.
AMERICAN JOURNAL OF CARDIOLOGY (2000)
分享论文
