相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Development and large volume production of extremely high current density YBa2Cu3O7 superconducting wires for fusion
A. Molodyk et al.
SCIENTIFIC REPORTS (2021)
Development of general expressions for the temperature and magnetic field dependence of the critical current density in coated conductors with variable properties
Ashleigh Francis et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)
Recent development and mass production of high Je 2G-HTS tapes by using thin hastelloy substrate at Shanghai Superconductor Technology
Guangyu Jiang et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)
In-field critical current and pinning mechanisms at 4.2 K of Zr-added REBCO coated conductors
Eduard Galstyan et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)
Progress in scale-up of REBCO STAR™ wire for canted cosine theta coils and future strategies with enhanced flexibility
Soumen Kar et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)
Long-length YBCO coated conductors for ultra-high field applications: gaining engineering current density via pulsed laser deposition/alternating beam-assisted deposition route
Alexander Usoskin et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)
Flux-Pinning Properties of BaHfO3-Doped EuBCO-Coated Conductors Fabricated by Hot-Wall PLD
Shinji Fujita et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)
Status of CORC® cables and wires for use in high-field magnets and power systems a decade after their introduction
D. C. van der Laan et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)
Progress in fabrication of second generation high temperature superconducting tape at Shanghai Superconductor Technology
Y. Zhao et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)
Development of Long-Length BMO-Doped REBCO Coated Conductors by Hot-Wall PLD Process
Shinji Fujita et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)
Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K
J. van Nugteren et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)
Engineering current density over 5kAmm(-2) at 4.2K, 14T in thick film REBCO tapes
Goran Majkic et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)
Broad temperature study of RE-substitution effects on the in-field critical current behavior of REBCO superconducting tapes
Shudong Zhang et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)
BMO-Doped REBCO-Coated Conductors for Uniform In-Field Ic by Hot-Wall PLD Process Using IBAD Template
Y. Iijima et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)
Materials design for artificial pinning centres in superconductor PLD coated conductors
J. P. F. Feighan et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)
Introduction of BaSnO3 and BaZrO3 artificial pinning centres into 2G HTS wires based on PLD-GdBCO films. Phase I of the industrial R&D programme at SuperOx
V. Chepikov et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)
Critical current measurement of commercial REBCO conductors at 4.2 K
K. Tsuchiya et al.
CRYOGENICS (2017)
Field and temperature scaling of the critical current density in commercial REBCO coated conductors
Carmine Senatore et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)
Sample and length-dependent variability of 77 and 4.2K properties in nominally identical RE123 coated conductors
L. Rossi et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)
2G HTS wires made on 30μm thick Hastelloy substrate
A. Sundaram et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)
Development for Mass Production of Homogeneous RE123 Coated Conductors by Hot-Wall PLD Process on IBAD Template Technique
Y. Iijima et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)
Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future
Wilfried Goldacker et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Development and production of second generation high Tc superconducting tapes at SuperOx and first tests of model cables
S. Lee et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Progresses and challenges in the development of high-field solenoidal magnets based on RE123 coated conductors
Carmine Senatore et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Strongly enhanced vortex pinning from 4 to 77 K in magnetic fields up to 31 T in 15 mol.% Zr-added (Gd, Y)-Ba-Cu-O superconducting tapes
A. Xu et al.
APL MATERIALS (2014)
Development Status of AMSC Amperium® Wire
S. Fleshler et al.
11TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS2013), PTS 1-4 (2014)
Role of weak uncorrelated pinning introduced by BaZrO3 nanorods at low-temperature in (Y,Gd)Ba2Cu3Ox thin films
A. Xu et al.
PHYSICAL REVIEW B (2012)
Properties of recent IBAD-MOCVD coated conductors relevant to their high field, low temperature magnet use
V. Braccini et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2011)
Enhanced flux pinning by BaZrO3 and (Gd,Y)2O3 nanostructures in metal organic chemical vapor deposited GdYBCO high temperature superconductor tapes
Yimin Chen et al.
APPLIED PHYSICS LETTERS (2009)
SuperPower's YBCO Coated High-Temperature Superconducting (HTS) Wire and Magnet Applications
D. W. Hazelton et al.
PROCEEDINGS OF THE IEEE (2009)
Critical current density in superconducting Nb-Tistrands in the 100 mT to 11 T applied field range
T. Boutboul et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2006)
分享论文
